2017 Chevrolet Corvette Exhaust System Kits

The MagnaFlow Chevrolet Corvette Race Series Axle-Back Performance Exhaust System 15283 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 6.2L Chevrolet Corvette take on any pretenders, whether on the track or the street. Exhaust kit 15283 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Chevrolet Corvette exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15283’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 15283 is backed by MagnaFlow’s limited lifetime warranty.

“Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Exhaust Valve: This axle-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: is MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 4″” Polished Tips: Finishing off this system are quad 4″” diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3″” to 2-1/2″” mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. Note: Failures of original equipment AFM and NPP actuators are not covered by aFe Power(R) warranty. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.”

This cat-back exhaust system is constructed of 3 IN to 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are quad 4-1/2 IN diameter black stainless steel clamp-on exhaust tips. The tips feature a laser etched aFe POWER logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This cat-back exhaust system incorporates factory style AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The AFM valves helps to control exhaust pulses during cylinder deactivation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.

“Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The performance axle-back exhaust system is constructed of 3″” to 2-1/2″” mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. This axle-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Includes quad 4″” diameter, carbon fiber tips with an aFe POWER logo. This item does not incorporate the AFM vales and will not fit models equipped with them.”

At the heart of any performance vehicle is the exhaust system. Hooker with its classic heart logo has been at the core of the exhaust industry for decades. Many of the most powerful vehicles on the planet have used Hooker Headers. Hooker continues to push the boundaries of performance with the new BlackHeart line of performance exhaust systems for popular late model vehicles. The BlackHeart line is truly a platform designed full exhaust program. From the cylinder head flange to the tailpipe, the BlackHeart line is engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality!.

This system produced gains of up to +7 HP and +5 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN to 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. Finishing off this exhaust system are quad 4-1/2 IN diameter black stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This cat-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG-Welded for race-proven strength and durability.

The MagnaFlow Chevrolet Corvette Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.7L Chevrolet Corvette with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15281 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15281’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

“Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “”concours classics”” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “”Made in the USA”” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.”

The MagnaFlow Chevrolet Corvette Street Series Axle-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 6.0L, 6.2L Chevrolet Corvette with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Corvette exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Corvette’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15886 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Super Competition Side mount headers deliver the most aggressive style and performance for your early Corvette, Camaro, Nova or Firebird. Side mount headers are built from lightweight 18 gauge tubing. Side tubes slip directly to the collector for a leak free seal. Hooker side mount headers and side tubes come with 3 choices of coating; show quality chrome, high heat resistant black paint and Hooker’s Metallic Ceramic Thermal Barrier Coating. Replaceable Hooker mufflers are available separately in 2 different styles; glass pack and reverse flow. The glass pack style provides the highest performance with minimal backpressure and sound control. The reverse flow is designed for maximum sound control.

BORLA(R) Cat-back(TM) and Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy And The Distinctive BORLA(R) Sound Of Power respected by motoring enthusiasts everywhere.

Developing systems for the C8 Corvette presented Borla (R) engineers with unique challenges, but our team was up to the challenge. Great care was taken to ensure the integrity and function of the system as well as the vehicle itself. Part number 140839BC includes both AFM and NPP dual mode exhaust valves. It features the ATAK (R) sound level, our most aggressive sound. It provides a more exciting driving experience without any drone. It features our Polyphonic Harmonizer and SwitchFire (TM) technology. Borla (R) Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, Borla (R) patented SwitchFire (TM) design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with 4 Inch Black Chrome on T-304 stainless steel tips and is available with Polished T-304 stainless steel tips part number 140839 or Carbon Fiber tips, part number 140839CF.

Developing systems for the C8 Corvette presented Borla (R) engineers with unique challenges, but our team was up for the challenge. Great care was taken to ensure the integrity and function of the system as well as the vehicle itself. Part number 140839 includes both AFM and NPP dual mode exhaust valves. It features the ATAK (R) sound level, our most aggressive sound. It provides a more exciting driving experience without any drone. It features our Polyphonic Harmonizer and SwitchFire (TM) technology. Borla (R) Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, Borla (R) patented SwitchFire (TM) design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with 4 Inch Polished T-304 stainless steel tips and is available with Black Chrome on T-304 stainless steel tips part number 140839BC or Carbon Fiber tips, part number 140839CF.

Flow tech exhaust products are the perfect combination of quality and value. This axle-back exhaust kit covers the 1984-1996 C4 Corvette with the 5.7L V8 engine.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

When an exhaust manifold fastener breaks on certain General Motors and Isuzu vehicles, repairing it conventionally usually requires significant labor, up to and including removing the cylinder head. This Dorman OE FIX repair clamp saves time by creating a seal without needing to extract the broken stud.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.