2004 Chevrolet Blazer Suspension Parts

Below you will find various in-demand Chevrolet Suspension Parts, components and accessories for your 2004 Blazer. Advance Auto Parts has popular Blazer parts like Air Suspension and Kits, Shocks and Struts, Control Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Blazer model years including 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2005, 2019 and more. Select a category of 2004 Chevrolet Blazer Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2004 Chevrolet Blazer Suspension Parts Categories

Air Shock Installation Kits

Shock Absorber and Coil Spring Assemblies

Air Suspension Shocks

Leaf Spring Shackles

Rear Shock and Struts

Leaf Springs

Front Shock and Struts

Active Suspension Relays

Suspension Control Arm Bolts

Leaf Spring Bumpers

Lower Control Arm Bumpers

Shock Boots, Levelers, and Accessories

Lower Control Arm Bushings

Strut Bellows

Control Arm Shaft Kits

Leaf Spring Bushings

Coil Spring Insulators

Leaf Spring Insulators

Jounce Bumpers

Air Suspension Sensor Connectors

Essential Suspension Parts for 2004 Chevrolet Blazers

from

$49.99

The Dorman Suspension Control Arm Bolt Kit includes all necessary components to secure the control arm to the vehicles chassis system. The bolts and hardware available in this repair kit are made from high-quality materials and designed to provide a longer service life.

Product Features:

Direct replacement for a proper fit every time
Durable steel construction for a longer service life
Secures suspension to vehicle frame
Manufactured to strict engineering quality standards

from

$138.99

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Upper Mount Type: Loop Bushing and Cantilever Pin Mount – 1/2″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)

from

$14.99

This leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
Restores functionality – this spacer is made to fully restore part functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$53.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Loose or worn chassis parts can lead to premature tire wear
Incorporates proven design and engineering features

from

$17.79

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$23.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$19.79

Protects spring and spring seat from damage
Replacement helps to reduce noise
Includes insulator and bearing

from

$89.99

The completely new designed Nitro Drop 2 shocks bring a high performance blend of internal valve technology and state of the art construction at a price never seen before for your vehicle.

Product Features:

Hardened Chrome 12.5 Millimeter Piston Rods
Cavitation Free Valve Train Avoids Air From Decreasing The Shock Absorbers Effectiveness
Teflon Guide Bushing
Metal Dust Boots
45 Millimeter Wide Body For Increased Oil Volume And OEM Quality Rubber Bushings
Easy Installation

from

$332.99

Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:

Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA

from

$71.99

Engineered to provide long life and dependability

from

$46.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$38.49

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$12.29

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$25.99

Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

from

$46.99

from

$114.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Improves steering response
Complete kit for 1 arm
Heat treated steel bushings OR torsional rubber bushings
Reduces vibration

from

$199.99

Improves steering response
Complete kit for 1 arm
Heat treated steel bushings OR torsional rubber bushings
Reduces vibration

from

$137.99

Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$188.99

MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.
Upper Mount Type: Loop Bushing and Cantilever Pin Mount – 5/8″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)

from

$24.99

Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$141.99

Get premium control and performance with Rancho RS9000XL shocks. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL shocks are ideal for on-road and off-road use, towing and more.

Product Features:

NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
REDUCES FADE – Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
STRONG AND DURABLE – Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
HANDLES EXTREME TEMPERATURE CHANGES – Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation.
SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$80.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$13.99

This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

Upgrade your 2004 Chevrolet Blazer with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2004 Chevrolet Blazer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your Blazer functioning at its best. At Advance Auto Parts, we offer a wide selection of 69 Suspension Parts for the 2004 Chevrolet Blazer, designed to meet your needs without breaking the bank. From Air Suspension and Kit replacements to Shocks and Struts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2004 Chevrolet Blazer at great prices. Our Suspension Parts inventory for this model ranges from just $7.29 to $331.99, with an average price of $59.03. Our 69 Suspension Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2004 Chevrolet Blazer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Chevrolet Blazer, we stock popular OEM and aftermarket Suspension Parts from top names like Moog, Monroe, Dorman, and more. Moog Suspension Parts start at just $30.49 and boast an impressive 4.5 stars average rating from customers. Monroe and Dorman also bring quality to the table, with Suspension Parts available starting at $13.99, and at an average 4.4 stars rating. With 461 customer reviews and counting, our 2004 Chevrolet Blazer Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Chevrolet Blazer is always ready to roll. We’re committed to providing you with everything you need to keep your Blazer in top shape, all in one place. Start shopping confidently below for your 2004 Chevrolet Blazer!

Best-Selling Air Suspension and Kits for 2004 Chevrolet Blazers

Enhance the driving experience in your Chevrolet with 7 quality Air Suspension and Kit components, starting at $25.99.

show more show less

from

$137.99

MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$46.99

from

$25.99

from

$26.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$54.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$46.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$53.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Most Popular 2004 Chevrolet Blazer Shocks and Struts

Customize your Chevrolet with 18 Shocks and Struts products like Rear Shock and Struts, Front Shock and Struts, and Strut Bellows, all priced under $141.99.

show more show less

from

$72.99

The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price. Covered by Rancho®’s limited warranty.

Product Features:

Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
Protective boot included – Protects the shock rod and oil seal
Limited Warranty – Guarantees your investment

from

$61.99

Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:

Available for import and domestic light trucks and vans
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$50.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$36.99

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
Gas-charged unit
Improved handling and control
Economical OE replacement
Meets OE product specifications

from

$108.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$121.99

CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
EXCELLENT RESPONSE AND STABILITY – High-pressure nitrogen charge provides a quicker response for excellent vehicle control
BUILT TO LAST – High-strength shock housing and hardened, chrome-plated piston rod provide durability and longer service life
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED SHOCK FADE AND AERATION – Free floating dividing piston separates shock fluid from high-pressure gas charged to reduce shock fade and aeration
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee

from

$26.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$24.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$108.99

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$113.99

CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
EXCELLENT RESPONSE AND STABILITY – High-pressure nitrogen charge provides a quicker response for excellent vehicle control
BUILT TO LAST – High-strength shock housing and hardened, chrome-plated piston rod provide durability and longer service life
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED SHOCK FADE AND AERATION – Free floating dividing piston separates shock fluid from high-pressure gas charged to reduce shock fade and aeration
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee

from

$12.29

Made of Superior Hyper-Flex+ Material
Helps Prevent Damage to Control Arm

from

$83.99

Ideal for vehicles with a higher center of gravity, Monroe Reflex light truck shock absorbers feature ASD valving technology that automatically adjusts the unit to absorb the impact, helping to reduce vehicle roll and dive.

Product Features:

IMPROVES STABILITY – ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while larger reserve tube holds more fluid to run cooler
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$91.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$141.99

NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
REDUCES FADE – Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
STRONG AND DURABLE – Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
HANDLES EXTREME TEMPERATURE CHANGES – Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation.
SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$94.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg. F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$89.99

Hardened Chrome 12.5 Millimeter Piston Rods
Cavitation Free Valve Train Avoids Air From Decreasing The Shock Absorbers Effectiveness
Teflon Guide Bushing
Metal Dust Boots
45 Millimeter Wide Body For Increased Oil Volume And OEM Quality Rubber Bushings
Easy Installation

from

$80.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Shock
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Gm S-Series Truck
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Made In Use
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$69.99

KYB Recommended Orem Replacement Shock
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Gm S-Series Truck
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

Top Picks for 2004 Chevrolet Blazer Control Arms

Upgrade Chevrolet Blazers with top-quality Control Arms parts, including 26 OEM and aftermarket selections for your 2004 model.

show more show less

from

$38.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$30.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$12.49

Control Arm Bushing

from

$75.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$11.29

Driveworks Brand Control Arm Bushings are made to meet OE specifications. They play a role that isolate the high-frequency inherent vibration from the vehicle. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Replacement helps reduce vehicle noise and sway while turning

from

$16.29

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Loose or worn chassis parts can lead to premature tire wear
Incorporates proven design and engineering features

from

$19.99

Control Arm Bushing

from

$10.99

Control Arm Bushing

from

$41.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$45.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Metal rib design helps lock the inner tube within frame pocket
Metal surfaces are phosphate coated for corrosion protection

from

$49.99

Direct replacement for a proper fit every time
Durable steel construction for a longer service life
Secures suspension to vehicle frame
Manufactured to strict engineering quality standards

from

$10.49

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$121.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$114.99

Improves steering response
Complete kit for 1 arm
Heat treated steel bushings OR torsional rubber bushings
Reduces vibration

from

$94.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$77.99

With over 40 years of history, Nolathane remains the number 1 replacement and enhancement bushing and chassis component brand throughout Australia & New Zealand and now boasts a warehouse in California & catalog to suit the North American market.

Product Features:

Kit Contains: 8 Shell bushings, 8 Tubes, Grease

from

$49.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$43.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$40.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$25.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$24.99

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$19.99

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$18.49

This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$10.99

Control Arm Bushing

In-Demand Coil and Leaf Springs for 2004 Chevrolet Blazers

Select from 18 premium Coil and Leaf Springs parts for your 2004 Chevrolet Blazer, with prices ranging from $13.99 to $331.99.

show more show less

from

$64.99

Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:

Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
Excellent value – original equipment quality at a lower price
Ready to install – all essential hardware is included for an easy installation

from

$13.99

This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$19.79

Protects spring and spring seat from damage
Replacement helps to reduce noise
Includes insulator and bearing

from

$215.99

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$30.49

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$19.49

Protects spring and spring seat from damage
Replacement helps to reduce noise
Includes insulator and bearing

from

$14.99

Direct replacement – this leaf spring bumper spacer is designed to match the fit, appearance and function of the original spacer on specified vehicles
Restores functionality – this spacer is made to fully restore part functionality after the original part fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$71.99

Engineered to provide long life and dependability

from

$47.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$123.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$73.99

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$17.99

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

from

$331.99

Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA

from

$79.99

COMPLET STRUT ASMBLY

from

$39.99

Reduces vibration
Reduces road noise
UV resistant
No Squeak

from

$38.99

Reduces vibration
Reduces road noise
UV resistant
No Squeak

from

$25.99

A critical service item for any leaf sprung vehicle. High kilometers and heavy load carrying causes excessive wear on rubber bushings. Nolathane’s signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD¿s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Product Features:

Kit Contains: 4 bushings, 2 Tubes

from

$25.99

Kit Contains: 4 bushings, 2 Tubes, Grease, Install Guide

Top-Rated Suspension Parts Brands For Your 2004 Chevrolet Blazer

Shop for the best-rated brands offering Suspension Parts and other products for your 2004 Chevrolet Blazers. Below you’ll find some of our best rated Suspension Parts from Moog, Monroe, and Dorman, and more. Suspension Parts from these brands that fit a 2004 Blazer start at just $13.99 and are rated as high as 4.5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2004 Chevrolet Blazer Suspension Parts

When it comes to maintaining or upgrading your 2004 Chevrolet Blazer, using quality Suspension Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Suspension Parts, specifically designed for the 2004 Chevrolet Blazer. With over 3 Moog brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.49, with an average price of just $48.32. Plus, with over 10 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $30.49

(1)

Suspension Control Arm Bushing Kit

“This is not the typical rubber bushing. The elastomer used in these Moog parts, I expect, will last much longer than typical rubber bushings.”

from $75.99

(1)

Suspension Control Arm Bushing Kit

“Most control arm bushings are difficult to install. These are no different. Quality appears to be very good. I won’t know if they help high speed”

from $38.49

(8)

Suspension Control Arm Bushing Kit

“just like factory replacement !”

Popular Monroe 2004 Chevrolet Blazer Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 2004 Chevrolet Blazer owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 2004 Blazer, Advance Auto Parts carries a full inventory of 3 Monroe Suspension Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Monroe Suspension Parts range from $36.99 to $61.99, plus, with more than 234 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from $36.99

(90)

Gas-Matic LT Suspension Shock Absorber

“Made my 1995 F150 ride like new. Easy install”

from $61.99

(84)

Gas-Matic Suspension Shock Absorber

“Great product”

from $50.99

(60)

Gas-Matic LT Suspension Shock Absorber

“Easy to install.”

FAQs for 2004 Chevrolet Blazer Suspension Parts

Which Suspension Parts are best-sellers for 2004 Chevrolet Blazers?

Out of 69 Suspension Parts that fit 2004 Chevrolet Blazers, the following parts are the top sellers:

OESpectrum Rear Suspension Shock Absorber (19710477) – $108.99
Rear Suspension Shock Absorber Air Hose Kit (5100001) – $46.99
Multi-Purpose Relay (12460010) – $26.99

What’s the price range for 2004 Chevrolet Blazer Suspension Parts?

Suspension Part prices for the 2004 Chevrolet Blazer start at $7.29 and go up to $331.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2004 Chevrolet Blazer?

The average price for Suspension Parts for the 2004 Chevrolet Blazer is $59.03. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Chevrolet Blazer model years?

Yes, we currently carry Suspension Parts for 24 model years of Chevrolet Blazers between 1969 and 2019. Suspension Parts are bought most frequently for the following model years: 2019, 2005, 2003, 2002, 2001, 2000, 1999, 1998, and 1997.

What are the cheapest Suspension Parts for my 2004 Chevrolet Blazer?

The cheapest 2004 Chevrolet Blazer Suspension Parts we carry in stock are:

Suspension Control Arm Bumper (50211544) – $7.29
Control Arm Bushing (12251993) – $8.99
Lower Control Arm Bumper (22143281) – $10.49
Control Arm Bushing (10577301) – $10.99
Control Arm Bushing (10577312) – $10.99

What are the top-rated Suspension Parts that fit the 2004 Chevrolet Blazer?

Out of 461 reviews by customers, our 2004 Chevrolet Blazer Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2004 Chevrolet Blazer and their top-rated products:

Control Arms
- Suspension Control Arm Bushing Kit (20973415) – $38.49
- Control Arm Bushing (10577300) – $12.49
- Suspension Control Arm Bushing Kit (20516471) – $30.49
Shocks and Struts
- Suspension Control Arm Bushing Kit (20973415) – $38.49
- Control Arm Bushing (10577300) – $12.49
- Suspension Control Arm Bushing Kit (20516471) – $30.49
Coil and Leaf Springs
- Suspension Control Arm Bushing Kit (20973415) – $38.49
- Control Arm Bushing (10577300) – $12.49
- Suspension Control Arm Bushing Kit (20516471) – $30.49

What types of Suspension Parts do you sell for my 2004 Chevrolet Blazer?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 2004 Chevrolet Blazer:

Can I get help with 2004 Chevrolet Blazer Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.

What is your return policy for Chevrolet Blazer Suspension Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Blazer Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Chevrolet Blazer Suspension Parts

Dorman – Help – Control Arm Bolt Kit (Part No.13505)

Monroe – Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly (Part No.58241)

Dorman – Leaf Spring Insert (Part No.924-070)

MOOG – Suspension Control Arm Bumper (Part No.K6598)

MOOG – Leaf Spring Shackle Bushing (Part No.K200802)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1243)

MOOG – Coil Spring Insulator (Part No.K160045)

Belltech – Nitrogen Gas Charged, Twin Tube, Non Adjustable Valving, Without Shock Boots (Part No.8530)

Dorman – Suspension Leaf Spring (Part No.22-403)

MOOG – Leaf Spring Shackle (Part No.K150382)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6176)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK64)

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK18)

Rare Parts – Control Arm Shaft Kit (Part No.RP15366)

Rare Parts – Control Arm Shaft Kit (Part No.RP16612)

Monroe – Max-Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA759)

Monroe – Max-Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA743)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Rancho – Suspension Shock Absorber RS9000XL (Part No.RS999244)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37130)

Dorman – Help – Leaf Spring Inserts (Part No.31067)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Monroe – Max-Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA759)

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK18)

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK64)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1236)

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)

Carquest Premium – Repair Harness (Part No.PTA1176)

Rancho – RS5000 Shock Absorber (Part No.RS5124)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.59012)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59372)

Monroe – Gas-Matic LT Suspension Shock Absorber (Part No.59303)

Monroe – OESpectrum Rear Suspension Shock Absorber (Part No.37021)

Monroe – OESpectrum Rear Suspension Shock Absorber (Part No.911517)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Monroe – OESpectrum Suspension Shock Absorber (Part No.37129)

Monroe – OESpectrum Front Suspension Shock Absorber (Part No.911516)

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Monroe – Reflex Suspension Shock Absorber (Part No.911021)

Rancho – RS5000X Suspension Shock Absorber (Part No.RS55222)

Rancho – Suspension Shock Absorber RS9000XL (Part No.RS999124)

Rancho – RS5000X Suspension Shock Absorber (Part No.RS55124)

Belltech – Nitrogen Gas Charged, Twin Tube, Non Adjustable Valving, Without Shock Boots (Part No.8530)

KYB – Gas Shock (Part No.344040)

KYB – Gas Shock (Part No.344041)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6176)

MOOG – Suspension Control Arm Bushing Kit (Part No.K7164)

Driveworks – Control Arm Bushing (Part No.DW-K6282B)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6411)

Driveworks – Control Arm Bushing (Part No.DW-K6176)

MOOG – Suspension Control Arm Bumper (Part No.K6606)

Driveworks – Control Arm Bushing (Part No.DW-K6283)

Driveworks – Control Arm Bushing (Part No.DW-K6177B)

MOOG – Suspension Control Arm Bushing Kit (Part No.K7194)

MOOG – Suspension Control Arm Bushing Kit (Part No.K6282)

Dorman – Help – Control Arm Bolt Kit (Part No.13505)

Dorman – Help – Lower Control Arm Bumper (Part No.31061)

Energy Suspension – Control Arm Bushing Set (Part No.3.3162R)

Rare Parts – Control Arm Shaft Kit (Part No.RP15905)

Rare Parts – Control Arm Bushing (Part No.RP17088)

Nolathane – Front Control Arm Bushing Set (Part No.REV027.0082)

Rare Parts – Control Arm Bushing (Part No.RP17069)

Rare Parts – Control Arm Bushing (Part No.RP16840)

Rare Parts – Control Arm Bushing (Part No.RP16259)

Rare Parts – Control Arm Bushing (Part No.RP15158)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-449)

Rare Parts – Control Arm Bushing (Part No.RP17318)

Dorman – Suspension Control Arm Bushing Kit (Part No.533-444)

Driveworks – Control Arm Bushing (Part No.DW-K3113B)

Dorman – Position Leaf Spring Shackle Kit (Part No.722-028)

Dorman – Help – Leaf Spring Inserts (Part No.31067)

MOOG – Coil Spring Insulator (Part No.K160045)

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly (Part No.58523)

MOOG – Leaf Spring Shackle Bushing (Part No.SB335)

MOOG – Coil Spring Insulator (Part No.K160047)