2004 BMW 330xi Steering and Chassis Parts

Below you will find various in-demand BMW Steering and Chassis Parts, components and accessories for your 2004 330xi. Advance Auto Parts has popular 330xi parts like Power Steering Parts, Sway Bars, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other 330xi model years including 2001, 2002, 2003, 2005, 2006 and more. Select a category of 2004 BMW 330xi Steering and Chassis Parts below and start saving instantly.

Popular 2004 BMW 330xi Steering and Chassis Parts Categories

Rack & Pinions

Lower Ball Joints

Steering Shaft U-Joints

Power Steering Pumps

Sway Bar Link Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Power Steering Pump Pulleys

Subframe Bushings

Power Steering Pressure Hoses

Power Steering Pump Caps

Steering Knuckles

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Rack and Pinion Boots

Power Steering Hose Assemblies

Sway Bar Bushings

Tie Rod Assemblies

Power Steering Fluid Level Sensors

Power Steering Reservoir Hoses

Rack and Pinion Seal Kits

Rack and Pinion Bellow Clamps

MOOG, Subframe Bushings

Power Steering Reservoir Gaskets

Essential Steering and Chassis Parts for 2004 BMW 330xis

from

$61.72

Subframe Mount

from

$193.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening

from

$31.99

SUBFRAME BUSHING

from

$6.99

POWER STEERINGFILTER

from

$32.05

P/S Reservoir

from

$14.49

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.

Product Features:

Rein boot kits come with all the needed hardware and components for the complete repair.
All components are manufactured to strict engineering standards/specifications in materials and tolerances
Rein also offers a full line of individual boots.
Matches original equipment design specifications

from

$35.70

P/S Pump Pulley

from

$54.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$24.99

Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$15.57

Coolant Level Sensor

from

$45.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$248.27

This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$242.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$235.99

This steering shaft universal joint matches the fit and function of the original equipment joint to ensure a safe, reliable repair. Made of quality materials, it features sealed bearings to ensure a long service life.

Product Features:

Ideal replacement – this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models.
Durable materials – this shift boot is manufactured from quality materials for durability.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$73.78

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$767.99

This suspension knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this suspension knuckle is designed to replace the original knuckle on specific vehicles.
Reliable fit – precision-engineered to match the dimensions of original components.
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$297.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$144.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$181.99

Complete with inner and outer tie rod ends
Restores OE alignment
Reduces tire wear
Improves steering response

from

$78.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$488.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$13.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$12.60

Power Steering Reservoir Cap

from

$3.73

The APA/URO Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$351.99

Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening

from

$121.93

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$86.99

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$109.99

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

Upgrade your 2004 BMW 330xi with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2004 BMW 330xi, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Steering and Chassis Parts are key to keeping your 330xi functioning at its best. At Advance Auto Parts, we offer a wide selection of 103 Steering and Chassis Parts for the 2004 BMW 330xi, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2004 BMW 330xi at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.96 to $767.99, with an average price of $117.74. Our 103 Steering and Chassis Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 2004 BMW 330xi without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 BMW 330xi, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone Moog, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. With 85 customer reviews and counting, our 2004 BMW 330xi Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 BMW 330xi is always ready to roll. We’re committed to providing you with everything you need to keep your 330xi in top shape, all in one place. Start shopping confidently below for your 2004 BMW 330xi!

Best-Selling Power Steering Parts for 2004 BMW 330xis

Enhance the driving experience in your BMW with 48 quality Power Steering Part components, starting at $3.73.

show more show less

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$54.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$35.70

P/S Pump Pulley

from

$32.05

P/S Reservoir

from

$50.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$254.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$37.49

from

$15.57

Coolant Level Sensor

from

$24.99

Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Reservoir contains filter that is not-removable and reservoir must be replaced to keep power steering system functioning properly
Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$91.99

from

$59.99

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$64.86

Power Steering Pump Pulley, Plastic

from

$27.99

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$34.49

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$696.99

NEW RACK & PINION

from

$620.99

CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:

Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
Performance testing ensures perfect fit, function and reliable performance.
Computerized spool valve balancing ensures exceptional steering feel.
Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
Built to meet or exceed O.E.M. performance.

from

$602.86

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$559.05

Steering Rack

from

$488.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$414.99

REMAN RACK & PINION

from

$286.99

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$269.78

P/S Pressure Hose

from

$248.27

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$233.44

P/S Pump

from

$232.99

NEW P/S PUMP

from

$224.12

P/S Pump

from

$144.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$124.36

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$79.49

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$67.83

Steering Rack Boot K

from

$49.99

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

100% testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$47.01

Steering Rack Boot K

from

$41.68

Steering Rack Boot Kit

from

$38.11

Power Steering Reservoir

from

$32.51

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$31.45

P/S Reservoir Line H

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$21.99

RACK BELLOW

from

$16.74

Steering Rack Boot K

from

$14.49

Rein boot kits come with all the needed hardware and components for the complete repair.
All components are manufactured to strict engineering standards/specifications in materials and tolerances
Rein also offers a full line of individual boots.
Matches original equipment design specifications

from

$12.60

Power Steering Reservoir Cap

from

$6.99

POWER STEERINGFILTER

from

$3.73

The APA/URO Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

Most Popular 2004 BMW 330xi Sway Bars

Customize your BMW with 19 Sway Bars products like Sway Bar Link Kits, Sway Bar Link Bushing Kits, and Sway Bar Bushings, all priced under $74.99.

show more show less

from

$50.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$50.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$31.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$13.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$33.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$24.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$74.99

Do you have every sway bar link on the shelf? Well you don’t need too, Whiteline have developed a clever cut to length universal sway bar link that has a 10mm ball stud has a working range of 80-320mm c/c. 1 part number covers hundreds of applications.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$64.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$64.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$52.06

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$51.59

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$50.99

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$45.99

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$25.99

Designed to fit a 20mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Internal grease reservoirs provide continual self lubrication for optimum friction management.

from

$24.99

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$22.75

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$21.11

Sway Bar Link

from

$14.93

Sway Bar Link

from

$11.11

The Rein Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

Top Picks for 2004 BMW 330xi Ball Joints

Upgrade BMW 330xis with top-quality Ball Joints parts, including 11 OEM and aftermarket selections for your 2004 model.

show more show less

from

$234.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$234.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$164.12

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$96.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$56.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

Easy to install.
Construction and design validated by MOOG engineers
Restores like-new steering and handling
Designed to meet or exceed original equipment performance
Broad coverage for foreign and domestic applications
Engineered to provide long life and dependability

from

$96.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$284.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$279.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$242.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$242.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$163.33

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

In-Demand Tie Rods for 2004 BMW 330xis

Select from 16 premium Tie Rods parts for your 2004 BMW 330xi, with prices ranging from $42.99 to $181.99.

show more show less

from

$78.99

EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$42.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$42.99

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$181.99

Complete with inner and outer tie rod ends
Restores OE alignment
Reduces tire wear
Improves steering response

from

$179.99

Complete with inner and outer tie rod ends
Restores OE alignment
Reduces tire wear
Improves steering response

from

$130.35

Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$110.48

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$104.95

FEBI Tie rod assemblies strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod assembly ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties
High ball stud articulation angles.

from

$98.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$92.05

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$90.63

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$87.03

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties
High ball stud articulation angles.

from

$65.56

Tie Rod End

from

$57.73

FEBI Tie rod ends strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod ends ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties
High ball stud articulation angles.

from

$55.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$49.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Most Sold 2004 BMW 330xi Steering Shafts

Explore our best-selling BMW parts for the 2004 330xi among 1 OEM and aftermarket options starting from $235.99.

show more show less

from

$235.99

Ideal replacement – this steering shaft universal joint matches the fit and function of the original equipment joint for specific makes and models.
Durable materials – this shift boot is manufactured from quality materials for durability.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

Top-Rated Steering and Chassis Parts Brands For Your 2004 BMW 330xi

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2004 BMW 330xis. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone and Moog, and more. Steering and Chassis Parts from these brands that fit a 2004 330xi start at just $13.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 2004 BMW 330xi Steering and Chassis Parts

When it comes to maintaining or upgrading your 2004 BMW 330xi, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 2004 BMW 330xi. With over 10 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $242.05. Plus, with over 62 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$620.99

This product is not rated

New Rack and Pinion Assembly

“”

from
$31.99

This product is not rated

Power Steering Filter

“”

from
$254.99

This product is not rated

Remanufactured Power Steering Pump

“”

Popular Moog 2004 BMW 330xi Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2004 BMW 330xi owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2004 330xi, Advance Auto Parts carries a full inventory of 11 Moog Steering and Chassis Parts. Plus you will be keeping your BMW in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $13.99 to $234.99, plus, with more than 22 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$78.99

This product is not rated

Tie Rod End

“”

from
$50.99

This product is not rated

Stabilizer Bar Link

“”

from
$50.99

This product is not rated

Stabilizer Bar Link

“”

FAQs for 2004 BMW 330xi Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2004 BMW 330xis?

Out of 103 Steering and Chassis Parts that fit 2004 BMW 330xis, the following parts are the top sellers:

Power Steering Filter (10659735) – $31.99
Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (10029443) – $54.99
Tie Rod End (10225800) – $78.99

What’s the price range for 2004 BMW 330xi Steering and Chassis Parts?

Steering and Chassis Part prices for the 2004 BMW 330xi start at $2.96 and go up to $767.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2004 BMW 330xi?

The average price for Steering and Chassis Parts for the 2004 BMW 330xi is $117.74. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other BMW 330xi model years?

Yes, we currently carry Steering and Chassis Parts for 5 model years of BMW 330xis between 2001 and 2006. Steering and Chassis Parts are bought most frequently for the following model years: 2006, 2005, 2003, 2002, and 2001.

What are the cheapest Steering and Chassis Parts for my 2004 BMW 330xi?

The cheapest 2004 BMW 330xi Steering and Chassis Parts we carry in stock are:

P/S Reservoir Gasket (12602942) – $2.96
APA/URO Steering Rack Boot Clamp (10758608) – $3.73
POWER STEERINGFILTER (50167394) – $6.99
Subframe Bushing (10784070) – $7.43
Sway Bar Bushing (11837782) – $11.11

What types of Steering and Chassis Parts do you sell for my 2004 BMW 330xi?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2004 BMW 330xi:

Can I get help with 2004 BMW 330xi Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Steering and Chassis Parts and more.

What is your return policy for BMW 330xi Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new BMW 330xi Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 BMW 330xi Steering and Chassis Parts

Hutchinson – Subframe Mount (Part No.L1005238366HUT)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 16mm Banjo (Part No.40260)

Dorman – SUBFRAME BUSHING (Part No.537-908)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

Rein – P/S Reservoir (Part No.M2030422018RIN)

Rein – Power Steering Rack Boot Kit (Part No.BKK0189)

APA/URO Parts – P/S Pump Pulley (Part No.M2060949007APA)

Beck/Arnley – Stabilizer End Link (Part No.101-6894)

Whiteline – Sway Bar Link Bushing (Part No.W23394)

Vemo – Coolant Level Sensor (Part No.G1050226145VMO)

Rein – Power Steering Suction Hose (Part No.PSH0174)

Rein – Automotive Power Steering Pressure Line Hose Assembly (Part No.M2015310471RIN)

Rare Parts – Conrol Arm W/Bj (Part No.RP11401)

Dorman – Steering Shaft Joint (Part No.425-756)

Lemfoerder – OE Replacement Ball Joint (Part No.L2020241536LEM)

Dorman – Left Rear Knuckle (Part No.698-259)

Cardone – Remanufactured Power Steering Pump (Part No.21-147)

Powercraft – Rack Pinion Seal Kit (Part No.9046)

Rare Parts – Tie Rod Assembly (Part No.RP29238)

MOOG – Tie Rod End (Part No.EV800715)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2803)

MOOG – Stabilizer Bar Bushing Kit (Part No.K201394)

ZF – Power Steering Reservoir Cap (Part No.M2070442134ZF)

APA/URO Parts – APA/URO Steering Rack Boot Clamp (Part No.M101178016APA)

Carquest Premium – Power Steering Return Hose, 16mm Banjo x 18mm Female Quick Connect (Part No.40869)

Rein – Power Steering Return Line Assembly (Part No.M2016322178RIN)

Rein – Power Steering Return Hose (Part No.PSH0172)

Rein – Power Steering Return Hose (Part No.PSH0231)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Power Steering Filter (Part No.20-P038F)

Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-906)

APA/URO Parts – P/S Pump Pulley (Part No.M2060949007APA)

Rein – P/S Reservoir (Part No.M2030422018RIN)

MOOG – Rack & Pinion Bellows Kit (Part No.K90444)

Cardone – Remanufactured Power Steering Pump (Part No.21-5310)

Carquest Premium – Power Steering Return Hose Assembly, 5/8" I.D. Molded Reservoir Return Hose (Part No.40046)

Vemo – Coolant Level Sensor (Part No.G1050226145VMO)

Rein – Power Steering Reservoir (Part No.PSR0027)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 16mm Male "O" Ring (Part No.39910)

Rein – Power Steering Return Hose (Part No.PSH0242)

Febi – Power Steering Pump Pulley, Plastic (Part No.M206096847FEB)

Rein – Power Steering Suction Hose (Part No.PSH0111R)

Rare Parts – R & P Bellows (Part No.RP28497)

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3410N)

Cardone New – New Rack and Pinion Assembly (Part No.97-2803)

Maval – Complete Steering Rack, Remanufactured (Part No.M1000437467MAV)

Cardone – Steering Rack (Part No.M1000899664CAR)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2803)

Atlantic Automotive Eng – REMAN RACK & PINION (Part No.3410)

Cardone New – New Power Steering Pump (Part No.96-5310)

Autopart International Inc – P/S Pressure Hose (Part No.M20151965183API)

Rein – Automotive Power Steering Pressure Line Hose Assembly (Part No.M2015310471RIN)

Autopart International Inc – P/S Pump (Part No.M20101954611API)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5714N)

TRW – P/S Pump (Part No.M2010241623TRW)

Powercraft – Rack Pinion Seal Kit (Part No.9046)

Rein – Power Steering Return Line Assembly (Part No.M2016420834RIN)

Rein – Power Steering Return Line Assembly (Part No.M2016383535RIN)

Bosch – Steering Rack Boot K (Part No.M1030240766BOS)

Cardone New – New Power Steering Reservoir (Part No.3R-501)

Febi – Steering Rack Boot K (Part No.M1030240766FEB)

ZF – Steering Rack Boot Kit (Part No.M1030240766ZF)

ZF – Power Steering Reservoir (Part No.M2030422018ZF)

Rein – Power Steering Molded Reservoir Hose (Part No.M2033125245RIN)

Autopart International Inc – P/S Reservoir Line H (Part No.M20331997014API)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

BBB Industries – Power Steering Filter (Part No.991-FLT2)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Dorman – RACK BELLOW (Part No.541-498)

Rein – Steering Rack Boot K (Part No.M1030240766RIN)

Rein – Power Steering Rack Boot Kit (Part No.BKK0189)

ZF – Power Steering Reservoir Cap (Part No.M2070442134ZF)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

APA/URO Parts – APA/URO Steering Rack Boot Clamp (Part No.M101178016APA)

MOOG – Stabilizer Bar Link (Part No.K750327)

MOOG – Stabilizer Bar Link (Part No.K750328)

MOOG – Stabilizer Bar Link (Part No.K80457)