2004 BMW 330i Performance and Racing Products
More 2004 BMW 330i Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 2004 BMW 330i, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 2004 BMW 330i Performance and Racing Products
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12922-C)
from
$368.99
7″ Tall Air Filter: This intake system utilizes an oil free, 7″ tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Carbon Fiber Look Cover w/ Auxiliary Air Inlet: This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet. Hassle-Free Installation: All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Product Features:
See More
Product Features:
- Outflows Factory Intake By 14%
- CAD-Designed Roto-Molded Intake Tube
- A Stealthy Under-Hood Look w/Aux Air Inlet
- Uses Pro 5R Filter For Maximum Air Flow
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Million Mile Air Filter (Part No.57-1001)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-20442)
from
$379.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses 360 deg. Radial Flow Air Filter
- 5 Layer Cotton Gauze Media
- Seamless Integration w/Stock Air Inlet
- Washable And Reusable
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-20442)
from
$379.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses 360 deg. Radial Flow Air Filter
- Non-Oiled
- Seamless Integration w/Stock Air Inlet
- Washable And Reusable
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-12922-B)
from
$322.99
7″ Tall “Oil Free” Air Filter: This intake system utilizes an oil free, 7″ tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet: Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet. Hassle-Free Installation: All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Product Features:
See More
Product Features:
- Outflows Factory Intake
- CAD-Designed Roto-Molded Intake Tube
- Vacuum Form Cover For Stealthy Look
- Incl. Auxiliary Air Inlet
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-81012-C)
from
$455.99
The aFe Stage 2 cold air intake system produces up to 10HP and 12lbs. x ft. torque while outflowing the factory intake by up to 20. This intake includes a highly engineered heatshielded housing with a one-piece intake tube. Handling filter duties is the five layered, progressively finer mesh cotton gauze, oiled Pro 5R washable/reusable, 360 degree inverted top radial flow air filter that provides maximum filtration and high flow. The polished aluminum intake tube is engineered for improved volumetric efficiency and maximum performance while lowering Intake Air Temps (I.A.T). Utilizing factory mounting points, this system provides a hassle free installation.
Product Features:
See More
Product Features:
- Uses Pro DRY S Air Filter For Maximum Air Flow
- Rotomolded Plastic Tube
- 56% cfm Flow Gain
- Improved Throttle Response
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-81012-C)
from
$455.99
This Stage 2 Sealed Intake produces 12HP, 15LBS. x FT. of torque and outflows the factory intake by 56. This sealed air intake system features a washable/reusable 6 inch conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100 polyurethane for long life and multiple cleaning cycles. The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity
Product Features:
See More
Product Features:
- Uses Pro 5R Air Filter For Maximum Air Flow
- Rotomolded Plastic Tube
- 56% cfm Flow Gain
- Improved Throttle Response
Popular 2004 BMW 330i Performance and Racing Products Categories
2004 BMW 330i Performance and Racing Products
You count on your 2004 BMW 330i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 3 Performance and Racing Products ranging in price from $349.99 to $379.99, you’re sure to find everything you need for your 2004 BMW 330i.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 2 different brands like K&N and aFe POWER. 2004 BMW 330i Performance and Racing Products start as low as $349.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 10 extensive product reviews on 2004 BMW 330i Performance and Racing Products.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2004 BMW 330i below to get started!
Top-Rated Performance and Racing Products Brands For Your 2004 BMW 330i
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 BMW 330i running right for years to come. In our inventory you’ll find brands like K&N aFe POWER, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Air Intake Kits. All are waiting to get your 2004 BMW 330i back on the road. Some of the top-rated K&N products in these categories are:
from
$349.99
(10)
Cold Air Intake: Adds Up To 11 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
FAQs for 2004 BMW 330i Performance and Racing Products
What are the most purchased Performance and Racing Products for the 2004 BMW 330i?
Out of 3 Performance and Racing Products for the 2004 BMW 330i, the most popular in our inventory are:
from
$379.99
This product is not rated
Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Dry Air Filter For Easy Maintenance
Engine Cold Air Intakes
from
$379.99
This product is not rated
Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Oiled Air Filter For Maximum Airflow
Engine Cold Air Intakes
