2003 Workhorse Custom Chassis W22 Belts and Hoses

Essential 2003 Workhorse Custom Chassis W22 Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.21442)

Premium Molded Coolant Hose

from

$38.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – V-Ribbed Serpentine Belt: 125.33" Long, 7 Rib Count, Exact Fit (Part No.K071247)

V-Ribbed Serpentine Belt: 125.33" Long, 7 Rib Count, Exact Fit

from

$98.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – V-Ribbed Serpentine Belt: 114.555" Long, 6 Rib Count, Exact Fit (Part No.K061140)

V-Ribbed Serpentine Belt: 114.555" Long, 6 Rib Count, Exact Fit

from

$64.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 125.33" Long, 7 Rib Count, Exact Fit (Part No.K071247HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 125.33" Long, 7 Rib Count, Exact Fit

from

$105.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Molded Heater Hose; EPDM Rubber, 7/8 Inch Diameter, 4 1/2 Inch Length (Part No.88445)

Molded Heater Hose; EPDM Rubber, 7/8 Inch Diameter, 4 1/2 Inch Length

from

$18.29
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Premium Molded Heater Hose (Part No.19802)

Premium Molded Heater Hose

from

$24.79
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.88" Long, 1.50" Diameter (Part No.E71430)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.88" Long, 1.50" Diameter

from

$17.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves (Part No.89015)

Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves

from

$31.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 90 mm Diameter (Part No.900401A)

O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 90 mm Diameter

from

$66.99
This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the G.M. Original Equipment pulley, the Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. This pulley is supplied with a new integrated bolt/dust shield to facilitate installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys
  • Heavy Duty Steel Pulley
  • Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
  • Precision steel stamping with close tolerance ball bearing pocket.
  • Electro-deposited coating (e-coat) for superior corrosion resistance.
  • Running surface designed and engineered for proper belt tracking.
See More

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Idler Pulley (Pulley only)

from

$13.49
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth

from

$30.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Gates – Premium Molded Coolant Hose (Part No.23803)

Premium Molded Coolant Hose

from

$78.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999010A)

Serpentine Belt Tensioner: 1 Piece

from

$62.99
This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular General Motors tensioner. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. (*O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) Note: The dust shield protecting the bearing has been upgraded from the original design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. This tensioner is supplied with a new OE style mounting bolt. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
See More

Gates – DriveAlign« Automatic Belt Drive Tensioner (Part No.38103)

DriveAlign« Automatic Belt Drive Tensioner

from

$48.99
Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.

Product Features:
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
  • Torsional round spring design provides reliability as well as consistent tension
  • Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.
See More

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89231)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$53.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • This tensioner includes the required hardware for proper installation
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999122A)

Serpentine Belt Tensioner: 1 Piece

from

$85.99
This Litens belt tensioner is supplied by the original equipment tensioner supplier to GM and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The aftermarket part features a cast-in lift feature and belt stretch indicator. As with the Original Equipment part, this tensioner is manufactured in Canada to the same exacting specifications as the O.E. part. The pulley is heavy duty steel as specified by the manufacturer. 2 molded locator pins for precise installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Heavy Duty Steel Pulley
  • Professional Mechanics will change this tensioner in about 20 minutes.
  • Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
See More

2003 Workhorse Custom Chassis W22 Belts and Hoses

You count on your 2003 Workhorse Custom Chassis W22 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 19 Belts and Hoses ranging in price from $13.49 to $85.99, you’re sure to find everything you need for your 2003 Workhorse Custom Chassis W22.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 5 different brands like Dayco, Litens, and Driveworks. 2003 Workhorse Custom Chassis W22 Belts and Hoses start as low as $13.49!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 895 extensive product reviews on 2003 Workhorse Custom Chassis W22 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Idler Pulley (Pulley only) with 4.0 stars and Poly Rib Belt Serpentine Belt; 108.07 Long, 6 Rib Count with 5.0 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2003 Workhorse Custom Chassis W22 below to get started!

Top-Rated Belts and Hoses Brands For Your 2003 Workhorse Custom Chassis W22

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Workhorse Custom Chassis W22 running right for years to come. In our inventory you’ll find brands like Dayco, Litens, Driveworks, and even more.

Popular Litens Belts and Hoses

You’ll find popular Litens brand products across Belt Tensioners. All are waiting to get your 2003 Workhorse Custom Chassis W22 back on the road. Some of the top-rated Litens products in these categories are:
Serpentine Belt Tensioner: 1 Piece
from $62.99
(5)
Serpentine Belt Tensioner: 1 Piece
Belt Tensioner Assemblies

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2003 Workhorse Custom Chassis W22, and some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 99.5 Long, 6 Rib Count
from $30.99
(123)
Poly Rib Belt Serpentine Belt; 99.5 Long, 6 Rib Count
Serpentine Belts

FAQs for 2003 Workhorse Custom Chassis W22 Belts and Hoses

What are the most purchased Belts and Hoses for the 2003 Workhorse Custom Chassis W22?

Out of 19 Belts and Hoses for the 2003 Workhorse Custom Chassis W22, the most popular in our inventory are:
O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 90 mm Diameter
from $66.99
This product is not rated
O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 90 mm Diameter
Idler Pulleys
Serpentine Belt
from $31.99
(7)
Serpentine Belt
Serpentine Belts

What are the top-rated 2003 Workhorse Custom Chassis W22 Belts and Hoses?

Top-rated Belts and Hoses for your 2003 Workhorse Custom Chassis W22 based on customer reviews/ratings are:
Idler Pulley (Pulley only)
from $13.49
(10)
Idler Pulley (Pulley only)
“Good”
Poly Rib Belt Serpentine Belt; 108.07 Long, 6 Rib Count
from $45.99
(2)
Poly Rib Belt Serpentine Belt; 108.07 Long, 6 Rib Count
“Replaced original equipment accessory belt after 100K miles. Smooth and quiet like when the car was new.”
Molded Heater Hose; EPDM Rubber, 7/8 Inch Diameter, 4 1/2 Inch Length
from $18.29
(1)
Molded Heater Hose; EPDM Rubber, 7/8 Inch Diameter, 4 1/2 Inch Length
“Form Fit and Function was great”