2003 Volkswagen Beetle Oil and Lubricants

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:

• EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
• REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
• FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
• MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
• MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

Castrol® GTX® 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• (1) When tested in engines with a high level of sludge
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM

Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 0W-20. This formula utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes. (1) Mobil 1 helps to keep your engine running at lower temperatures (2) and is proven to cool engine temperatures by over 10%. (3) Mobil 1 High Mileage full-synthetic motor oil 10W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines. Mobil 1 is America’s No. 1 selling synthetic motor oil brand at retail, (4) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing results may vary. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 High Mileage full-synthetic motor oil 10W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes (1)
• Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Manufacturer Part Number: 103535
• Extended Engine Life: This high mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.
• Temperature Control: Proven to cool engine temperatures by over 10%, Mobil 1 helps to keep your engine running at lower temperatures compared to conventional oil.
• Oxidation Control: Mobil 1 High Mileage full-synthetic motor oil helps control oxidation to prevent oil breakdown, ensuring long-lasting performance and protection.
• Versatile Compatibility: Recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.

If you trust your vehicle to be there for you, you need to be there for its engine, with Mobil 1 Extended Performance full-synthetic motor oil 10W-30. Our ultimate full-synthetic motor oil meets or exceeds the industry’s toughest standards to help you get the most from your engine for up to 20,000 miles between oil changes, guaranteed.(1) Mobil 1 Extended Performance utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 High Mileage full-synthetic motor oil 10W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes (1)
• Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 102990
• Extended Engine Protection: Mobil 1 Extended Performance full-synthetic motor oil 10W-30 protects your engine for up to 20,000 miles or 1 year, ensuring long-lasting performance and reliability.
• Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines in passenger cars, SUVs, light vans, and light trucks.
• Industry-Leading Standards: Meets or exceeds the industry’s toughest standards, making it a trusted choice for car builders, experienced mechanics, and as the Official Motor Oil of NASCAR«.
• America’s No. 1 Synthetic Motor Oil Brand: Mobil 1 is the top synthetic motor oil brand at retail, trusted by consumers and professionals alike for its superior quality and performance.

Castrol® GTX® 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:

• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• (1) When tested in engines with a high level of sludge
• Meets or exceeds the following specifications:
• API SP/SN PLUS/SN/SM

EDGE 5W-30 Full Synthetic Motor Oil is expertly designed to meet the demands of highly tuned four-cylinder and advanced technology engines that operate at elevated temperatures. With its full synthetic composition, this oil delivers exceptional lubrication to critical engine components, ensuring smooth operation from the valve train to the bearings. Classified as standard with an SAE oil weight of 5W-30, it provides the strength and stability needed to maximize engine performance, even under high-temperature conditions. Its advanced formulation helps maintain optimal lubrication, reducing wear and enhancing the longevity of your engine. Packaged in a convenient 1-quart size, it’s perfect for quick top-offs or completing a full oil change, offering both reliability and ease of use.

Product Features:

Product Features:
• Expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures.
• Full synthetic composition ensures exceptional lubrication for all engine components, from the valve train to the bearings.
• Classified as standard with an SAE oil weight of 5W-30, providing the strength needed for maximum engine performance.
• Helps maximize engine performance by maintaining optimal lubrication under high-temperature conditions.
• Comes in a convenient 1 QT size, perfect for top-offs or completing oil changes.

Pennzoil Platinum Full Synthetic 10W-30 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Full synthetic 10W-30 motor oil that is made with natural gas and designed to maximize engine protection
• Backed by a 15,000-mile protection guarantee to protect your pursuit of every mile
• Provides better fuel economy (based on the latest industry standards)
• Keeps pistons cleaner than required by the toughest industry standard (based on Sequence IIIH results)
• Designed for high-performance engines
• Formulated to provide faster low-temperature oil flow and protection in extreme heat
• Helps protect engines from loss of power
• Meets or exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
• Meets or exceeds the following OEM requirements: Chrysler MS-6395
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

Mobil 1 FS European Car Formula 0W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 0W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America’s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions.
• Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes (1)
• Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
• Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
• Manufacturer Part Number: 112628
• Turbocharged Engine Protection: Approved for many Mercedes-Benz, VW, Audi, and Porsche vehicles, this formula offers excellent protection for turbocharged engines.

Longtime High Tech 5W-30 Full Synthetic Engine Oil is expertly crafted for diesel engines, offering exceptional performance and protection. Designed with Low SAPS technology, it is ideal for vehicles equipped with diesel particulate filters (DPF), ensuring compatibility with modern emission systems. This premium 5W-30 oil promotes smooth engine operation, making it perfect for engines with turbochargers and catalytic converters. Its advanced formula delivers excellent wear protection, prolonging engine service life while supporting extended oil change intervals as recommended by manufacturers. Engineered for fast oil penetration, it ensures optimal lubrication from the moment you start your vehicle. Made in Germany, this full synthetic oil is a reliable choice for maintaining peak engine performance and efficiency.

Product Features:

Product Features:
• Smooth engine running
• Ideal with turbochargers and catalytic converters
• Long engine service life
• Excellent wear protection
• Ensures fast oil penetration of the engine
• Made in Germany

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

FRAM Heavy Duty 15W-40 Diesel Oil is premium high performance diesel engine oil utilizing the latest in engine oil additive technology to offer the ultimate protection of your engine. Designed to meet or exceed the latest OEM and API CK-4 requirements, it is also backwards compatible to previous OEM & API specifications such as CJ-4, CI-4, CI-4+, and CH-4. STP 15W-40 Diesel Oil carries the API SN classification for use in gasoline engines and is an excellent choice for operators with mixed fleets. The FRAM HD 15W-40 diesel oil is specially designed to protect EGR/Low-Emission Diesel Engines while maximizing the durability of Diesel Particulate Filters (DPF’s).

Product Features:

• High soot handling.
• Improved sludge control
• Excellent component protection for corrosion and wear
• Superior oxidation stability
• Shear stable formulation
• One oil for mixed Fleets
• Exceptional oil consumption control

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

Pennzoil Ultra Platinum Full Synthetic 0W-40 motor oil is our most advanced formulation with unbeatable wear and sludge protection, as well as unbeatable cleanliness. When it comes to torturous driving conditions, trust the unbeatable engine protection of Pennzoil Ultra Platinum. It offers outstanding performance in extreme temperatures and better fuel economy (based on the latest industry standard). Pennzoil Ultra Platinum Full Synthetic 0W-40 is the recommended venom in every SRT Viper and the motor oil that runs through every Demon (SRT is a registered trademark of Chrysler Group LLC). No matter the road, Pennzoil Ultra Platinum helps extend the life of your engine and protects for up to 20 years or 750,000 miles, whichever comes first. (Based on Sequence IVA wear test; Sequence IIIH oxidation and deposit test; and the Sequence VH sludge test. Pennzoil Ultra Platinum Lubrication Limited Warranty: Up to 20 years or 750,000 miles, whichever comes first, if you exclusively use Pennzoil Ultra Platinum Full Synthetic motor oil. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. To maintain your warranty, change your vehicles oil and oil filter at least as often as recommended by the vehicle manufacturer. Enrollment required. Keep your receipts. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Our most advanced full synthetic 0W-40 engine oil, designed for unbeatable engine protection
• Pennzoil Ultra Platinum comes with a 20-year, 750,000-mile warranty to protect your engine and give you peace of mind to drive every mile as hard as you can
• Made with natural gas
• Outstanding performance in extreme temperatures
• Designed for high-performance engines, it helps protect engines from loss of power
• Provides unsurpassed wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30)
• Provides better fuel economy (based on the latest industry standard)
• Exceeds the requirements of the following industry specifications: API SP
• Meets or exceeds the following OEM requirements: Chrysler MS-A0921 (SRT)
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual
• Advanced Additive Technology: Fortified with a moly friction modifier, this oil enables precise cam phaser rotation for accurate valve timing, delivering power when needed and extending engine life.

Shell Rotella T6 15W-40 diesel engine oil is a full synthetic motor oil that features exclusive Triple Protection Plus technology, formulated with fully synthetic base oils plus advanced additives to protect against wear, deposits, and oil breakdown. It offers better cold cranking properties and low-temperature pumpability at -15C compared to conventional and synthetic blend Shell Rotella 15W-40 products. It also delivers improved wear performance versus API CJ-4 technology, extended drain capabilities for more uptime, improved protection against oxidation for increased fuel economy, compatibility with exhaust emissions control systems, and protection in extreme operating conditions and climates. Shell Rotella T6 15W-40 is suitable for use in new and older diesel-powered vehicles, from Class 8 tractor/trailers to heavy-duty pickups and delivery, utility, and school bus fleets. Shell Rotella T6 is backed by a limited warranty valid up to 15 years or 500,000 miles (whichever comes first), guaranteed. (Shell Rotella Limited Warranty: Up to 15 years or 500,000 miles, whichever comes first, guaranteed, if you exclusively use Shell Rotella T6 Full Synthetic heavy-duty engine oil and meet enrollment mileage and vehicle manufacture date requirements. Enrollment required. Keep your receipts. Other conditions apply. See Rotella.com/warranty to enroll and for full details and terms.)

Product Features:

• Full synthetic 15W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
• Formulated to deliver increased protection against oxidation and enhanced deposit control/cleanliness
• Better cold cranking properties and low-temperature pumpability (compared to conventional and synthetic blend 15W-40 motor oil)
• Improved wear performance versus API CJ-4 technology
• Compatibility with exhaust emissions control systems
• Protection in extreme operating conditions and climates
• Limited warranty valid up to 15 years or 500,000 miles (whichever comes first) if you exclusively use Shell Rotella T6 Full Synthetic Technology heavy-duty engine oil
• Meets or exceeds the following industry requirements: API CK-4, CJ-4, CI-4 Plus, CI-4, SN; ACEA E11; JASO DH-2, MA/MA2
• Meets or exceeds the following OEM specifications: Caterpillar ECF-2/ECF-3; Cummins CES 20086, 20081; Detroit Fluids Specification (DFS) 93K222, 93K218; DTFR 15C100 (prev. MB 228.31); MACK EOS-4.5; MAN M 3775;
• Ford WSS-M2C171-F1; Allison TES 439; Volvo VDS-4.5
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

Mobil Super 10W-30 Synthetic Blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus.

Product Features:

• Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
• Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
• Works to provide outstanding engine wear protection under a variety of operating conditions
• Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
• Recommended for gasoline cars and light-duty trucks

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
• Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
• Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.

Pennzoil Platinum High Mileage Full Synthetic 10W-30 is designed to maximize engine protection and is formulated to help stop leaks in engines with more than 75,000 miles. Backed by a 15,000-mile protection guarantee to keep you covered between oil changes and for the long run (see Warranty Information below), it is the first of its kind full synthetic high mileage motor oil made with natural gas and designed to deliver less oil burn off than other high mileage oils (based on Sequence IIIH results). Pennzoil Platinum High Mileage motor oil conditions seals on older engines to give added protection to high-mileage vehicles. It offers complete protection mile after thrilling mile as it protects engines from loss of horsepower, offers excellent performance in extreme temperatures, provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides better fuel economy (based on the latest industry standards). (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Full synthetic 10W-30 engine oil designed for vehicles with more than 75,000 miles
• Backed by a 15,000-mile protection guarantee to keep you covered between oil changes and in the long run
• Keeps pistons cleaner than required by the toughest industry standards (based on Sequence IIIH results; does not apply to Pennzoil Platinum Euro motor oil)
• Proven to help stop leaks for engines with more than 75,000 miles
• Formulated to deliver less oil burn-off than high-mileage motor oils made from crude oil
• Provides better fuel economy (based on the latest industry standards) and helps protect horsepower
• Provides faster low-temperature oil flow and protects in extreme heat
• Exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
• Meets or exceeds the following OEM requirements: Chrysler MS-6395
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

FRAM Engine Oil SAE 30 is single grade or straight-viscosity motor oil that meets the stringent API SP, SN Plus / SN, SM, SL & CF specifications. It contains a balanced blend of high VI base stocks and an advanced additive package to deliver superior performance. It is designed to provide thermal and oxidation stability, deposit control, anti-wear protection, corrosion protection and improved pumpability. FRAM Engine Oil SAE 30 may be used in turbo-charged or naturally aspirated foreign and domestic engines recommending straight weight API SP/CF quality oil. This motor oil exceeds the stringent lubricating performance requirements of American, European, Korean, Japanese and other worldwide engine manufacturers where straight weight engine oil is recommended.

Product Features:

• Resists breakdown in severe engine environments
• Effectively prevents the formation of sludge and varnish deposits
• Reduces engine wear
• Turbo approved
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Superior Performance: FRAM Engine Oil SAE 30 is formulated with a balanced blend of high VI base stocks and advanced additives to deliver superior performance, ensuring your engine runs smoothly and efficiently.

FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
• Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
• Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

FRAM Small Engine Oil SAE 10W30 is a high-quality conventional oil designed specifically for small engines, making it an excellent choice for lawn equipment and other similar machinery. With its SAE 10W-30 weight, this oil provides reliable performance across a range of temperatures, ensuring smooth operation and optimal engine protection. Its formulation is tailored to meet the demands of small engines, helping to reduce wear and extend engine life. Packaged in a convenient 1-quart size, it’s perfect for quick refills or routine maintenance. Trust FRAM to deliver the durability and performance your equipment needs to keep running efficiently.

Product Features:

Product Features:
• Specifically formulated for small engines to ensure optimal performance and protection.
• Reliable SAE 10W-30 weight provides consistent operation across varying temperatures.
• Helps reduce engine wear and extend the lifespan of lawn equipment and similar machinery.
• Convenient 1-quart packaging allows for easy handling during refills and maintenance.
• High-quality conventional oil designed to meet the unique demands of small engine applications.

Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. Mobil 1 helps to keep your engine running at lower temperatures. (2) This technologically advanced motor oil is proven to cool engine temperatures by over 10%. (3) Its formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing results may vary. (4) Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO Full Synthetic/52 weeks ending February 25, 2023.)

Product Features:

• Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time.
• Helps protect critical engine parts for up to 10,000 miles between oil changes, (1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
• Manufacturer Part Number: 124315
• Versatile Application: Recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.

Pennzoil Platinum Euro Full Synthetic 5W-40 motor oil is designed to maximize engine protection for modern light-duty diesel and high-performance engines in European vehicles. Pennzoil Platinum Euro exceeds the most stringent car manufacturer requirements for cleanliness and protection based on Fiat, Mercedes-Benz, Porsche, Renault, and VW specifications. Made with natural gas, nothing keeps your engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40) than Pennzoil Platinum Euro motor oil. It protects horsepower, provides excellent performance in extreme temperatures and provides better fuel economy (based on latest industry standard). It also helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first, guaranteed. (Pennzoil Platinum Lubrication Limited Warranty: Up to 15 years or 500,000 miles, whichever comes first, guaranteed, if you exclusively use Pennzoil Platinum Full Synthetic motor oil, Pennzoil Platinum High Mileage Full Synthetic motor oil, and Pennzoil Platinum Euro Full Synthetic motor oil. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. To maintain your warranty, change your vehicles oil and oil filter at least as often as recommended by the vehicle manufacturer. Enrollment required. Keep your receipts. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Full synthetic 5W-40 motor oil that is made with natural gas and designed to maximize engine protection
• Formulated for modern light-duty diesel and high-performance engines in European vehicles, including Fiat, Mercedes-Benz, Porsche, Renault, and VW
• Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first, guaranteed
• Delivers faster low-temperature oil flow and protection in extreme heat
• Protects horsepower and keeps engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40)
• Provides better fuel economy (based on latest industry standard)
• Meets or exceeds the following industry requirements: API SP and all previous categories; ACEA A3/B3, A3/B4
• Meets or exceeds the following OEM specifications: Fiat 9.55535.Z2 and 9.55535.N2; Chrysler MS-10725 and MS-12991; BMW LL-01; Mercedes-Benz MB-Approval 226.5/ 229.3/229.5; Porsche A40; Renault RN 0700, RN 0710; Volkswagen VW 502 00, 505 00
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

Top Tec 0W-30 Full Synthetic Motor Oil delivers exceptional engine performance and efficiency, making it an ideal choice for a wide range of vehicles, including Volkswagen, Audi, BMW diesel, Mercedes-Benz, and select Porsche models. Engineered with a low-SAPS formula, this motor oil minimizes friction for the highest fuel economy while ensuring optimum lubrication under all operating conditions. Its fully synthetic composition and 0W-30 SAE weight provide superior protection and performance, even in extreme temperatures. Designed for extended oil change intervals as per manufacturer recommendations, this oil offers long-lasting durability and reliability. Whether you’re aiming for peak engine efficiency or reduced wear, this motor oil is a premium solution for maintaining your vehicle’s health and performance.

Product Features:

Product Features:
• Minimizes friction
• Highest fuel economy
• Optimum lubrication under all operating conditions
• Fully synthetic composition ensures superior engine protection and performance, even in extreme temperature conditions.
• Designed for extended oil change intervals, providing long-lasting durability and reliability as per manufacturer recommendations.

FRAM Full Synthetic Heavy Duty 5W-40 is a fully synthetic product formulated to provide  the ultimate in diesel engine oil protection. It is designed to protect EGR/Low-Emission Diesel  Engines while maximizing the durability of Diesel Particulate Filters (DPF’s). New additive  systems and rigorous laboratory and field testing have proven that FRAM Full Synthetic  Heavy Duty Diesel 5W-40 offers better and stronger armor against wear, improved performance  and greater fuel economy. FRAM Full Synthetic Heavy Duty Diesel 5W-40 helps your engine  operate within the new emission and pollution requirements as well as meeting or exceeding the  OEM requirements for every new engine being built by every engine manufacturer worldwide, including but not limited to: Caterpillar, Cummins, DaimlerChrysler (Mercedes Benz), Detroit  Diesel, Volvo, Mack, MAN, and Navistar.

Product Features:

• Excellent low temperature pumpability.
• High oxidative and thermal stability even under operating extremes.
• Lower oil consumption. Improved fuel economy.
• Ability to extend oil drain intervals.
• High soot handling.
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

Mobil 1 FS European Car Formula 0W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 0W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America’s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending February 25, 2023)

Product Features:

• Mobil 1 fs european car formula full synthetic engine oil 0w-40 helps to extend engine life even in severe conditions.
• Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes (1)
• Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
• Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
• Manufacturer part number: 120760

Formulated to perform well in gasoline engines without sacrificing protection in diesel engines, Shell Rotella T6 Multi-Vehicle 5W-30 heavy duty engine oil is a full synthetic motor oil that features exclusive Triple Protection Plus technology. Blended with lower levels of phosphorous compared to most diesel engine oils, it is able to meet both API CK-4 and SN performance standards allowing mixed fleet customers to consolidate lubricants. Designed to provide hard-working protection that adapts to your driving conditions, Shell Rotella T6 Multi-Vehicle provides excellent protection against wear, deposits, and oil breakdown, delivers demonstrated 2.8% improvement in fuel economy, and provides excellent extreme high/low-temperature protection. It also offers improved oxidation performance (relative to CJ-4 quality engine oils) and a low-ash formulation that helps protect exhaust catalysts and particulate filters found on the latest low-emission vehicles. With its wide range of specifications and approvals from many of the world’s leading engine makers, it is ideal for on- or off-road applications. Shell Rotella T6 MV is backed by a limited warranty valid up to 15 years or 500,000 miles (whichever comes first), guaranteed. (Compared to conventional SAE 15W-40 engine oil. Shell Rotella Limited Warranty: Valid up to 10 years or 300,000 miles, whichever comes first, if you exclusively use Shell Rotella T5 Synthetic Blend heavy-duty engine oil. Terms and conditions apply. See Rotella.Shell.com/warranty for details.)

Product Features:

• Full synthetic 5W-30 engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown, and improves high/low-temperature performance
• Performs extremely well in both diesel and gasoline engines, allowing mixed fleet customers to consolidate lubricants
• Better fuel economy performance of up to 2.8%, helping to deliver fuel savings without compromising engine protection or durability
• Blended with lower levels of phosphorous compared to most diesel engine oils
• Strong oxidation protection helps to minimize the formation of acids and oil thickening, resulting in a longer, cleaner engine life
• Excellent cold temperature flow for easier start-ups in extreme cold temperatures
• Limited warranty valid up to 15 years or 500,000 miles (whichever comes first), guaranteed, if you exclusively use Shell Rotella T6 MV Full Synthetic heavy-duty engine oil
• Meets or exceeds the following industry specifications: API CK-4, CJ-4, CI-4 Plus, CI-4; API SN; ACEA E6; JASO DH-2
• Meets or exceeds the following OEM requirements: Caterpillar ECF-2/ECF-3; Cummins CES 20081, 20086; DDC DFS 93K222, 93K218; DTFR 15C110 (prev. MB 228.51); MACK EO-S 4.5, EO-O Premium Plus; MTU Category 3.1; Volvo VDS 4.5, VDS-4
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual