2003 Toyota Tundra Drivetrains
More 2003 Toyota Tundra Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2003 Toyota Tundra, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2003 Toyota Tundra Drivetrains
Felpro – Differential Carrier Gasket (Part No.RDS 55428)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6074)
from
$106.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 93-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1993-2021
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.50 INCH / 13 MM
- MOUNT WIDTH: 6.00 INCH / 152 MM
- BOTTOM: SINGLE WEEP HOLE
- FRONT
- CUT-OUT NOTCH
NTN – Differential Pinion (Part No.J7020164790NTN)
from
$120.81
Differential Pinion
Yukon Gear – T100 Rear Differential With ABS Fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra (Part No.10059)
from
$298.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. T100 rear differential W/ ABS fits 01-02 4Runner, 01-04 Tacoma, 00-06 Tundra. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for 2001-2002 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra rear
- Includes axle bearing, inner and outer axle seals and snap ring
- This kit will work with ABS applications
- Services one side
Corteco – Axle Seal (Part No.K4021473844CFW)
from
$8.51
Axle Seal
National – Bearings (Part No.HM88649)
from
$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Install Kit For Toyota T100 And Tacoma (Without Locking Differential) (Part No.13085)
from
$399.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Toyota Tacoma and T100 without factory locking differential
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
National – Bearings (Part No.201-CC)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Pre-Pressed Rear Axle (Part No.926-148)
from
$758.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.
Product Features:
See More
Product Features:
- Easier installation – this pre-pressed axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
- Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
- Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Yukon Gear – 07 And Up Tundra Rear 10.5" Ring Gear Bolt With 5.7L (Part No.33065)
from
$12.99
07 and up Tundra rear 10.5″ ring gear bolt W/ 5.7L.
Product Features:
See More
Product Features:
- Ring gear bolt
- Fits 10.5″ Toyota Tundra
Yukon Gear – Toyota 7.5 Pinion Nut (Part No.33155)
from
$9.99
Toyota 7.5 pinion nut (M18x1.5).
Product Features:
See More
Product Features:
- Pinion nut for Toyota 7.5″
- 18mm x 1.5 thread
USA Standard Gear – Spartan Locker For Toyota 7.5" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17014)
from
$669.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Toyota 7.5″
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Neapco – Universal Joint (Part No.1-0154)
Yukon Gear – Differential Crush S (Part No.55080)
from
$73.99
Differential Crush S
Dorman – Rear Differential Cover (Part No.926-958)
from
$107.99
When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.
Product Features:
See More
Product Features:
- Rear Differential Cover
- Rear Differential Cover
- When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.
- Direct replacement – this weld-on differential cover directly replaces a corroded original cover on certain Sequoia, Tacoma and Tundra trucks
- Cost-effective repair – rather than buy a new axle, cut off the old cover and weld on this new one
Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)
NSK – Wheel Bearing (Part No.K8000150206NSK)
from
$47.06
NSK guarantees the high quality of all of their products by repeated, rigorous bench testing, and other checks that take full advantage of their cutting-edge technology, which only the major bearing manufacturers can offer.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Premium modified bearing steel
- Optimized sealing systems
USA Standard Gear – Ring & Pinion Gear Set For Toyota T100 And Tacoma In A 4.56 Ratio (Part No.36239)
from
$354.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits Toyota T100 & Tacoma rear without factory locking differential
- 8.125″ ring gear diameter
- 30 spline pinion
- 12 ring gear bolts
- 4.56 ratio
National – Multi Purpose Seal (Part No.710254)
from
$2.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-199)
from
$1191.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – T100 & Tacoma Roll Pin (Part No.33420)
Dorman – Front Differential Actuator (Part No.600-410)
from
$311.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
- Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
- Smart solution – delivers reliable fit and function for competitive price
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Small Hole Yoke For ’82 And Older Toyota T100 And Tacoma (With Locker) With 27 Spline Pinion (Part No.41107)
from
$276.99
Yukon small hole yoke for ’82 and older Toyota T100 and Tacoma (with locker) with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota Tacoma and T100 with factory locking differential
- 27 spline
Yukon Gear – Differential (Part No.26050)
from
$759.99
Differential
Yukon Gear – Toyota Bearing Retainer For ’01-’02 4Runner, ’01-’04 Tacoma & 00-’06 Tundra (Part No.33421)
from
$22.99
Product Features:
See More
- Bearing retainer
- Fits 2001-2002 Toyota 4Runner, 2001-2004 Tacoma and 2000-2006 Tundra
EMPI – RE CV Joint Boot Kit (Part No.K6010182695EMP)
from
$29.75
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Popular 2003 Toyota Tundra Drivetrains Categories
2003 Toyota Tundra Drivetrains
You count on your 2003 Toyota Tundra to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 164 Drivetrains ranging in price from $2.99 to $1,191.99, you’re sure to find everything you need for your 2003 Toyota Tundra.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and Driveworks. 2003 Toyota Tundra Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,325 extensive product reviews on 2003 Toyota Tundra Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter with 3.3 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2003 Toyota Tundra below to get started!
Top-Rated Drivetrains Brands For Your 2003 Toyota Tundra
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Toyota Tundra running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 2003 Toyota Tundra back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2003 Toyota Tundra, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2003 Toyota Tundra Drivetrains
What are the most purchased Drivetrains for the 2003 Toyota Tundra?
Out of 164 Drivetrains for the 2003 Toyota Tundra, the most popular in our inventory are:
What are the top-rated 2003 Toyota Tundra Drivetrains?
Top-rated Drivetrains for your 2003 Toyota Tundra based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
from
$32.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
“Well built , with grease fittings. Good OEM alternative!! Recommend!!”
from
$162.99
(12)
CV Axle Shaft Assembly
“First pair I received they were both damaged in shipping . They Reship them ,With expedited service i got them 5 days later.”
