2003 Toyota 4Runner Steering and Chassis Parts

Essential 2003 Toyota 4Runner Steering and Chassis Parts

CTR – Ball Joint (Part No.L2020138610CTR)

Ball Joint

from

$44.07
Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620062)

Control Arm and Ball Joint Assembly

from

$341.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life
  • HARDENDED TO MAXIMIZE STRENGTHá–áStuds are induction hardened to maximize strength, resist breakage and improve fatigue lifeá
  • GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐á
  • KEEPS DIRT AND WATER OUT –┐Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants┐á
  • ADDED CORROSION PROTECTIONá–┐Specially-engineered coatings are applied to metal surfaces toáinhibit┐premature deterioration┐caused by rain, snow, salt and road grimeá
  • PREMIUM BUSHINGS –┐Pre-installed with optimized stiffness to inhibit noise for a comfortable ride┐á
  • HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
  • ENHANCED STRUCTURAL STRENGTH ┐ Material and heat treatment are carefully selected to meet application requirements
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
See More

Carquest Premium – Bulk – 5/8" I.D. Reservoir Hose (Part No.35003)

Bulk - 5/8" I.D. Reservoir Hose

from

$53.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

CTR – Sway Bar Bushing (Part No.L1050161355CTR)

Sway Bar Bushing

from

$6.18
Sway Bar Bushing

Rein – P/S Air Control Valv (Part No.M2045136067RIN)

P/S Air Control Valv

from

$88.67
P/S Air Control Valv

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Dorman – Intermediate Steering Shaft Joint (Part No.425-476)

Intermediate Steering Shaft Joint

from

$39.49
Steering no longer as smooth as it should be? Replacing this steering shaft end yoke when servicing other steering shaft components can restore original feel and performance to the steering system.

Product Features:
  • Direct replacement – this steering shaft end yoke fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – this design has undergone torsional, salt spray and on-vehicle fit testing
See More

MOOG – Caster/Camber Shim (Part No.K100189)

Caster/Camber Shim

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Dorman – Alignment Caster / Camber Control Arm (Part No.528-110)

Alignment Caster / Camber Control Arm

from

$429.99
This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.

Product Features:
  • Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment
  • Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels
  • Durable construction – this part is made from quality materials for reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Cardone New – Power Steering Reservoir (Part No.3R-111)

Power Steering Reservoir

from

$112.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance
  • Designed to match O.E. fit, function and performance
  • Manufactured from O.E. grade material for strength and durability
  • Resistant to cracking caused by the high temperatures in the engine compartment
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

EMPI – Steering Rack Boot K (Part No.M1030142641EMP)

Steering Rack Boot K

from

$19.65
Steering Rack Boot K

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Dorman – Left Steering Knuckle (Part No.698-043)

Left Steering Knuckle

from

$436.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
  • Reliable fit – precision-engineered to match the dimensions of original components
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Energy Suspension – TrackBarBsh (Part No.8.7105R)

TrackBarBsh

from

$20.99
TrackBarBsh

Powercraft – Pump Seal Kit (Part No.8801)

Pump Seal Kit

from

$33.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Driveworks – Sway Bar Link Kit (Part No.DW-K90677)

Sway Bar Link Kit

from

$32.99
Sway Bar Link Kit

Powercraft – Rack Pinion Seal Kit (Part No.8944)

Rack Pinion Seal Kit

from

$92.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Rack and Pinion Assembly (Part No.26-2660)

Rack and Pinion Assembly

from

$301.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Whiteline – Sway Bar Link Upper Bushing (Part No.W23437)

Sway Bar Link Upper Bushing

from

$22.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Cardone – Power Steering Pump (Part No.21-5363)

Power Steering Pump

from

$161.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Dorman – Suspension Control Arm (Part No.524-213)

Suspension Control Arm

from

$155.99
This suspension track bar is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment track bar on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Carquest – Power Steering Pressure Switch (Part No.PS200)

Power Steering Pressure Switch

from

$56.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our parts are 100% tested to verify both mechanical and electrical switching performance.
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

National – Multi Purpose Seal (Part No.221510)

Multi Purpose Seal

from

$3.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Steering Shaft Joint (Part No.425-473)

Steering Shaft Joint

from

$139.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:
  • Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
  • Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
  • Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
  • Corrosion resistant – salt spray testing and premium coating help ensure future longevity
See More

Rein – Automotive Power Steering Pipe (Part No.M20281448470RIN)

Automotive Power Steering Pipe

from

$14.40
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from premium raw materials
  • Premium OE design
  • Right fit the first time
  • For European vehicles
See More

Driveworks – Steering Tie Rod End (Part No.DW-EV433)

Steering Tie Rod End

from

$34.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
See More

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010265141SNK)

Sankei 555 Tie Rod End

from

$57.35
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

2003 Toyota 4Runner Steering and Chassis Parts

You count on your 2003 Toyota 4Runner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 93 Steering and Chassis Parts ranging in price from $3.79 to $691.99, you’re sure to find everything you need for your 2003 Toyota 4Runner.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 22 different brands like Imperial, Cardone, and Moog. 2003 Toyota 4Runner Steering and Chassis Parts start as low as $3.79!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,847 extensive product reviews on 2003 Toyota 4Runner Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Stabilizer Bar Link with 5.0 stars and Stabilizer Bar Link with 5.0 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2003 Toyota 4Runner below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2003 Toyota 4Runner

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Toyota 4Runner running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Moog, and even more.

Popular Driveworks Steering and Chassis Parts

You’ll find popular Driveworks brand products across Sway Bars. All are waiting to get your 2003 Toyota 4Runner back on the road. Some of the top-rated Driveworks products in these categories are:
Sway Bar Link Kit
from $32.99
(2)
Sway Bar Link Kit
Sway Bar Link Kits
Sway Bar Link Kit
from $32.99
(3)
Sway Bar Link Kit
Sway Bar Link Kits

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2003 Toyota 4Runner, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 2003 Toyota 4Runner Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2003 Toyota 4Runner?

Out of 93 Steering and Chassis Parts for the 2003 Toyota 4Runner, the most popular in our inventory are:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Tie Rod End
from $35.99
(4)
Tie Rod End
Tie Rod Ends
Stabilizer Bar Bushing Kit
from $21.99
(5)
Stabilizer Bar Bushing Kit
Sway Bar Bushings

What are the top-rated 2003 Toyota 4Runner Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2003 Toyota 4Runner based on customer reviews/ratings are:
Stabilizer Bar Link
from $80.99
(8)
Stabilizer Bar Link
“High quality, ideal for FJ Cruiser rebuild”
Stabilizer Bar Link
from $80.99
(4)
Stabilizer Bar Link
“High quality parts, fit great, work great.”
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”