2003 Subaru Impreza Drivetrains

Essential Drivetrains for 2003 Subaru Imprezas

Whiteline – Differential Mount Front Support Bushing (Part No.KSB751)

Differential Mount Front Support Bushing

from

$52.99
KSB751 will reduce rear-end float particularly under acceleration. It will also remove drive train slap on hard gear changes while delivering more precise handling and chassis response from the rear. Highly recommended for big power engines and competition work including drag and circuit racing. Note: Will induce NVH.

Product Features:
  • Inserts are designed to work with the original factory bushing rather than replacing it.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
See More

Dorman – Engine Oil Drain Plug (Part No.A61101669326DOR)

Engine Oil Drain Plug

from

$4.90
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:
  • Direct replacement for a proper fit every time
  • Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
  • Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
  • Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
See More

Driveworks – Oil Seal (Part No.S-225010)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2595)

Cu Joint Boot Kit

from

$24.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

Ohno – Clamp – CV Boot (Part No.4I250142473OHN)

Clamp - CV Boot

from

$5.61
Clamp – CV Boot

National – Bearings (Part No.32007)

Bearings

from

$70.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (Part No.615-160.1)

Spindle Nut M22-1.5 Hex Size 32mm

from

$6.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Seal (Part No.223050)

Multi Purpose Seal

from

$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

FAG US – TAPERED ROLLER BEARI (Part No.30208A)

TAPERED ROLLER BEARI

from

$53.99
TAPERED ROLLER BEARI

Dorman – REAR DRIVESHAFT (Part No.986-978)

REAR DRIVESHAFT

from

$622.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Axle Bearing Carrier (Part No.K4045295696DOR)

Axle Bearing Carrier

from

$239.72
Precise machining meets ease of installation with Dorman’s Steering Knuckle. Dorman-improved to address weakness in the original aluminum construction, it’s engineered from durable iron for lasting performance.

Product Features:
  • Stronger materials ensure increased durability
  • Direct replacement for a proper fit every time
  • Crack-resistant
  • A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards
See More

National – Pinion Seal (Part No.711089)

Pinion Seal

from

$18.79
Pinion Seal

Carquest Premium – New CV Axle Assembly (Part No.NCV922591)

New CV Axle Assembly

from

$111.99
Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.

Product Features:
  • All New Materials
  • Engineered for OE Fitment
  • -40 Degree Rated CV Boots
  • Moly-Blend Grease in inner and outer joints
  • New nut and mounting hardware included if required
See More

Beck/Arnley – Cu Boot Kit (Part No.103-2964)

Cu Boot Kit

from

$29.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010182643EMP)

RE CV Joint Boot Kit

from

$25.61
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-982)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$53.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

EMPI – Axle Shaft Nut (Part No.K403059357EMP)

Axle Shaft Nut

from

$5.11
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

National – Bearings (Part No.32307)

Bearings

from

$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

SKF – Differential Pinion Bearing (Part No.J7020259642SKF)

Differential Pinion Bearing

from

$102.80
Differential Pinion Bearing

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99128)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Driveworks – Differential Seal (Part No.S-223255)

Differential Seal

from

$7.49
Product Features:
  • Brand may vary by location
See More

National – Axle Diff. Seal (Part No.711091)

Axle Diff. Seal

from

$13.79
Axle Diff. Seal

NOK – Differential Seal (Part No.J704084573NOK)

Differential Seal

from

$12.14
Differential Seal

Upgrade your 2003 Subaru Impreza with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2003 Subaru Impreza, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Drivetrains are key to keeping your Impreza functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Drivetrains for the 2003 Subaru Impreza, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to CV Axles and Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2003 Subaru Impreza at great prices. Our Drivetrains inventory for this model ranges from just $2.27 to $766.99, with an average price of $68.42. Our 57 Drivetrains in stock come from 18 trusted brands, so you’re sure to find the right part for your 2003 Subaru Impreza without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Subaru Impreza, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Royal Purple, Carquest Premium, and more. Valvoline Drivetrains start at just $12.49 and boast an impressive 5 stars average rating from customers. Royal Purple and Carquest Premium also bring quality to the table, with Drivetrains available starting at $12.99, and at an average 5 stars rating. With 1,765 customer reviews and counting, our 2003 Subaru Impreza Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2003 Subaru Impreza is always ready to roll. We’re committed to providing you with everything you need to keep your Impreza in top shape, all in one place. Start shopping confidently below for your 2003 Subaru Impreza!

Best-Selling Drive Shafts and Axles for 2003 Subaru Imprezas

Enhance the driving experience in your Subaru with 16 quality Drive Shafts and Axle components, starting at $4.49.

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66501)

CV Axle Shaft Assembly

from

$125.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

USA Industries – Constant Velocity Axle Assembly (Part No.AX-27089)

Constant Velocity Axle Assembly

from

$39.99
Precision-machined components reduce noise and provide maximum torque to the wheels.
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66903)

CV Axle Shaft Assembly

from

$99.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66505)

CV Axle Shaft Assembly

from

$99.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66907)

CV Axle Shaft Assembly

from

$99.99
N

Product Features:
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66916)

CV Axle Shaft Assembly

from

$92.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV66501HP)

CV Axle Shaft Assembly

from

$178.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Driveworks – Oil Seal (Part No.S-225010)

Oil Seal

from

$4.49
Product Features:
  • Brand may vary by location
See More

National – Shaft Repair Sleeve (Part No.99128)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-982)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$53.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Rear Drive Shaft: Greaseable, OE Fix (Part No.936-939)

Rear Drive Shaft: Greaseable, OE Fix

from

$766.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly.
  • Rear Drive Shaft: Greaseable, OE Fix.
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
See More

Dorman – Rear Drive Shaft: OE Fix (Part No.936-918)

Rear Drive Shaft: OE Fix

from

$686.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly.
  • Rear Drive Shaft: OE Fix.
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
See More

USA Standard Gear – REAR DRIVESHAFT (Part No.11344)

REAR DRIVESHAFT

from

$679.99
REAR DRIVESHAFT

First Equipment Quality – Axle Assembly, New (Part No.K4000835329FEQ)

Axle Assembly, New

from

$73.67
The FEQ Axle Assembly is assembled with 100% new components and features neoprene boots, high temp moly-grease and new clips and retainers.

Product Features:
  • OE-Equivalent and a Direct fit Replacement
  • Utilizes OE style crimp boot clamps
  • Provides exceptional reliability
  • 100% new OE replacement
  • Uses top quality Neoprene boots
See More

Dorman – Spindle Nut (Part No.K1002831724DOR)

Spindle Nut

from

$13.67
Spindle Nut

EMPI – Axle Shaft Nut (Part No.K403059357EMP)

Axle Shaft Nut

from

$5.11
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Most Popular 2003 Subaru Impreza CV Axles and Joints

Customize your Subaru with 10 CV Axles and Joints products like OE CV Boot Kits, CV Quick Boot Kits, and CV Axle Shaft Carrier Bearings, all priced under $248.61.

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2824)

Cu Joint Boot Kit

from

$23.79
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

Beck/Arnley – Cu Joint Boot Kit (Part No.103-2502)

Cu Joint Boot Kit

from

$28.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010181536EMP)

RE CV Joint Boot Kit

from

$25.20
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Dorman – Axle Bearing Carrier (Part No.K4045295696DOR)

Axle Bearing Carrier

from

$239.72
Precise machining meets ease of installation with Dorman’s Steering Knuckle. Dorman-improved to address weakness in the original aluminum construction, it’s engineered from durable iron for lasting performance.

Product Features:
  • Stronger materials ensure increased durability
  • Direct replacement for a proper fit every time
  • Crack-resistant
  • A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards
See More

Dorman – Axle Bearing Carrier (Part No.K4045295679DOR)

Axle Bearing Carrier

from

$248.61
Precise machining meets ease of installation with Dorman’s Steering Knuckle. Dorman-improved to address weakness in the original aluminum construction, it’s engineered from durable iron for lasting performance.

Product Features:
  • Stronger materials ensure increased durability
  • Direct replacement for a proper fit every time
  • Crack-resistant
  • A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards
See More

Beck/Arnley – Cu Boot Kit (Part No.103-2941)

Cu Boot Kit

from

$30.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

EMPI – RE CV Joint Boot Kit (Part No.K6010181548EMP)

RE CV Joint Boot Kit

from

$29.59
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:
  • Help restore the vehicle to like-new condition
  • Constructed of high strength OE materials
  • Resists environmental contamination
  • Protects the CV joint from premature failure
See More

Ohno – Clamp – CV Boot (Part No.4I250142473OHN)

Clamp - CV Boot

from

$5.61
Clamp – CV Boot

EMPI – Clamp – CV Boot (Part No.4I25091157EMP)

Clamp - CV Boot

from

$2.39
Clamp – CV Boot

EMPI – Clamp – CV Boot (Part No.4I25091156EMP)

Clamp - CV Boot

from

$2.27
Clamp – CV Boot

Top Picks for 2003 Subaru Impreza Spindles

Upgrade Subaru Imprezas with top-quality Spindles parts, including 3 OEM and aftermarket selections for your 2003 model.

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (Part No.615-160)

Spindle Nut M22-1.5 Hex Size 32mm (sold by each)

from

$5.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut (Part No.05134)

Spindle Nut

from

$12.29
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut M22-1.5 Hex Size 32mm (Part No.615-160.1)

Spindle Nut M22-1.5 Hex Size 32mm

from

$6.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

In-Demand Transfer Cases for 2003 Subaru Imprezas

Select from 3 premium Transfer Cases parts for your 2003 Subaru Impreza, with prices ranging from $12.62 to $70.99.

National – Multi Purpose Seal (Part No.223050)

Multi Purpose Seal

from

$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.32007)

Bearings

from

$70.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

SKF – Input Shaft Seal (Part No.J1156259660SKF)

Input Shaft Seal

from

$12.62
Input Shaft Seal

Most Sold 2003 Subaru Impreza Differentials

Explore our best-selling Subaru parts for the 2003 Impreza among 25 OEM and aftermarket options starting from $4.90.

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

from

$12.99
High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

Product Features:
  • Better Wear Protection
  • Increased Protection against Low Speed Pre-Ignition
  • Increased Fuel Efficiency
  • Better Protection for Vehicle Exhaust Emissions Equipment
  • Improved Compatibility with Fuels Containing Ethanol
  • Superior Corrosion Protection
  • Made in USA
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)

High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon

from

$32.99
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.32307)

Bearings

from

$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

from

$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
  • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
  • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
See More

Driveworks – Differential Seal (Part No.S-223255)

Differential Seal

from

$7.49
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.32305)

Bearings

from

$42.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Seal (Part No.1173)

Multi Purpose Seal

from

$12.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Axle Diff. Seal (Part No.711090)

Axle Diff. Seal

from

$14.29
Axle Diff. Seal

National – Axle Diff. Seal (Part No.711091)

Axle Diff. Seal

from

$13.79
Axle Diff. Seal

Dorman – Engine Oil Drain Plug (Part No.A61101669326DOR)

Engine Oil Drain Plug

from

$4.90
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:
  • Direct replacement for a proper fit every time
  • Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
  • Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
  • Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
See More

Whiteline – Differential Mount Support Outrigger Bushing (Part No.W91379)

Differential Mount Support Outrigger Bushing

from

$103.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

SKF – Differential Pinion Bearing (Part No.J7020259642SKF)

Differential Pinion Bearing

from

$102.80
Differential Pinion Bearing

FAG US – TAPERED ROLLER BEARI (Part No.30208A)

TAPERED ROLLER BEARI

from

$53.99
TAPERED ROLLER BEARI

Whiteline – Differential Mount Front Support Bushing (Part No.KSB751)

Differential Mount Front Support Bushing

from

$52.99
KSB751 will reduce rear-end float particularly under acceleration. It will also remove drive train slap on hard gear changes while delivering more precise handling and chassis response from the rear. Highly recommended for big power engines and competition work including drag and circuit racing. Note: Will induce NVH.

Product Features:
  • Inserts are designed to work with the original factory bushing rather than replacing it.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
See More

Whiteline – Differential Mount In Brace Bushing (Part No.W92835)

Differential Mount In Brace Bushing

from

$51.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
See More

National – Bearings (Part No.32306)

Bearings

from

$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

from

$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

NOK – Differential Seal (Part No.J704084573NOK)

Differential Seal

from

$12.14
Differential Seal

Ishino Stone – Pinion Seal (Part No.J7010259666ISH)

Pinion Seal

from

$8.13
Pinion Seal

Top-Rated Drivetrains Brands For Your 2003 Subaru Impreza

Shop for the best-rated brands offering Drivetrains and other products for your 2003 Subaru Imprezas. Below you’ll find some of our best rated Drivetrains from Valvoline, Royal Purple, and Carquest Premium, and more. Drivetrains from these brands that fit a 2003 Impreza start at just $12.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2003 Subaru Impreza Drivetrains

When it comes to maintaining or upgrading your 2003 Subaru Impreza, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2003 Subaru Impreza. With over 5 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49, with an average price of just $22.19. Plus, with over 290 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

DEX/MERC Automatic Transmission Fluid, 1 Gallon
from
$35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

“Equivalent to oem”

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

Popular Royal Purple 2003 Subaru Impreza Drivetrains

Royal Purple auto parts is one of the highest quality Drivetrain brands in the market. Any 2003 Subaru Impreza owner should feel confident when installing genuine Royal Purple parts in their vehicle. To ensure the best fit and performance for your 2003 Impreza, Advance Auto Parts carries a full inventory of 2 Royal Purple Drivetrains. Plus you will be keeping your Subaru in peak condition while saving money because prices on these Royal Purple Drivetrains range up to $12.99, plus, with more than 82 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
from
$12.99
This product is not rated

HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

“”

FAQs for 2003 Subaru Impreza Drivetrains

Which Drivetrains are best-sellers for 2003 Subaru Imprezas?

Out of 57 Drivetrains that fit 2003 Subaru Imprezas, the following parts are the top sellers:

What’s the price range for 2003 Subaru Impreza Drivetrains?

Drivetrain prices for the 2003 Subaru Impreza start at $2.27 and go up to $766.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2003 Subaru Impreza?

The average price for Drivetrains for the 2003 Subaru Impreza is $68.42. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Subaru Impreza model years?

Yes, we currently carry Drivetrains for 31 model years of Subaru Imprezas between 1993 and 2024. Drivetrains are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Drivetrains for my 2003 Subaru Impreza?

The cheapest 2003 Subaru Impreza Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 2003 Subaru Impreza?

Out of 1,765 reviews by customers, our 2003 Subaru Impreza Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2003 Subaru Impreza and their top-rated products:

What types of Drivetrains do you sell for my 2003 Subaru Impreza?

Can I get help with 2003 Subaru Impreza Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Drivetrains and more.

What is your return policy for Subaru Impreza Drivetrains?

Advance Auto Parts keeps returns simple. For new Subaru Impreza Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.