2003 Sterling Truck LT7500 Belts and Hoses

Essential 2003 Sterling Truck LT7500 Belts and Hoses

Driveworks – Automotive V-Belt, Driveworks (Part No.46017)

Automotive V-Belt, Driveworks

from

$10.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – V-Belt, Top Cog, Dayco (Part No.17340)

V-Belt, Top Cog, Dayco

from

$13.49
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9341)

Automotive XL« High Capacity V-Belt

from

$28.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9480HD)

FleetRunner« Heavy-Duty V-Belt

from

$41.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth (Part No.89101)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth

from

$44.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 32.8mm Width, Smooth (Part No.89105)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 32.8mm Width, Smooth

from

$45.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 31.26mm Width, 8 Grooves (Part No.89103)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 31.26mm Width, 8 Grooves

from

$55.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Gates – DRIVEALIGN PULLEY (Part No.36164)

DRIVEALIGN PULLEY

from

$109.99
DRIVEALIGN PULLEY

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 74 mm Diameter (Part No.900120A)

O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 74 mm Diameter

from

$41.99
This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance
  • Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface. Tandem 6303 Ball Bearings for extended life.
  • Installation instructions included.
See More

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 86 mm Diameter (Part No.900117A)

O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 86 mm Diameter

from

$57.99
This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 108 Long, 8 Rib Count, Heavy Duty (Part No.5081080)

Poly Rib Belt HD Serpentine Belt; 108 Long, 8 Rib Count, Heavy Duty

from

$67.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080545)

Micro-V« Serpentine Drive Belt

from

$54.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Serpentine Belts By Gates

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 81.61" Long, 10 Rib Count, Exact Fit (Part No.K100810HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 81.61" Long, 10 Rib Count, Exact Fit

from

$110.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K100810)

Micro-V« Serpentine Drive Belt

from

$93.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – Green Stripe« Heavy-Duty Straight Heater Hose (Part No.28442)

Green Stripe« Heavy-Duty Straight Heater Hose

from

$6.49
Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:
  • Green Stripe construction provides best cost-per-mile economics
  • Abrasion-resistant cover
  • Engineered with materials to resist electrochemical degradation
  • Reduces water loss from water permeating the hose wall and cover
  • Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24232)

Green Stripe« 2-Ply Straight Coolant Hose

from

$2.99
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
  • Engineered with compounds that resist electrochemical degradation
  • Approved for marine applications
  • Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24236)

Green Stripe« 2-Ply Straight Coolant Hose

from

$3.79
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
  • Engineered with compounds that resist electrochemical degradation
  • Approved for marine applications
  • Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Gates – Premium Molded Coolant Hose (Part No.21492)

Premium Molded Coolant Hose

from

$33.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.50" Long, 1.88" Diameter (Part No.C70691)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.50" Long, 1.88" Diameter

from

$10.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 2.50" Diameter (Part No.C71813)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 2.50" Diameter

from

$18.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Molded Coolant Hose (Part No.20206)

Molded Coolant Hose

from

$26.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Heat and ozone resistant cover.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
  • Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
  • Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 2" Diameter (Part No.C70688)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 2" Diameter

from

$15.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.910062A)

Serpentine Belt Tensioner: 1 Piece

from

$187.99
This Heavy Duty Truck and Bus tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89481)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$146.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89439)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$136.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89480)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$195.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.910552A)

Serpentine Belt Tensioner: 1 Piece

from

$124.99
This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.910537A)

Serpentine Belt Tensioner: 1 Piece

from

$179.99
This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

2003 Sterling Truck LT7500 Belts and Hoses

You count on your 2003 Sterling Truck LT7500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 24 Belts and Hoses ranging in price from $5.29 to $229.99, you’re sure to find everything you need for your 2003 Sterling Truck LT7500.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 4 different brands like Dayco, Gates, and Litens. 2003 Sterling Truck LT7500 Belts and Hoses start as low as $5.29!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 2003 Sterling Truck LT7500 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Automotive V-Belt with 5.0 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2003 Sterling Truck LT7500 below to get started!

Top-Rated Belts and Hoses Brands For Your 2003 Sterling Truck LT7500

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Sterling Truck LT7500 running right for years to come. In our inventory you’ll find brands like Dayco, Gates, Litens, and even more.

Popular Dayco Belts and Hoses

You’ll find popular Dayco brand products across Serpentine and V Belts. All are waiting to get your 2003 Sterling Truck LT7500 back on the road. Some of the top-rated Dayco products in these categories are:

FAQs for 2003 Sterling Truck LT7500 Belts and Hoses

What are the most purchased Belts and Hoses for the 2003 Sterling Truck LT7500?

Out of 24 Belts and Hoses for the 2003 Sterling Truck LT7500, the most popular in our inventory are:
V-Belt, Top Cog, Dayco
from $13.49
This product is not rated
V-Belt, Top Cog, Dayco
V-Belts
Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth
from $44.99
This product is not rated
Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth
Drive Belt Idler Assemblies
Bottom Cog V-Belt; 46 Inch Long, Exact Fit Premium Quality
from $17.49
This product is not rated
Bottom Cog V-Belt; 46 Inch Long, Exact Fit Premium Quality
V-Belts

What are the top-rated 2003 Sterling Truck LT7500 Belts and Hoses?

Top-rated Belts and Hoses for your 2003 Sterling Truck LT7500 based on customer reviews/ratings are:
Automotive V-Belt
from $5.29
(1)
Automotive V-Belt
“God”