2003 Saab 9-3 Ignition and Tune-Up Products
More 2003 Saab 9-3 Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2003 Saab 9-3, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2003 Saab 9-3 Ignition and Tune-Up Products
NGK – Coil on Plug Boot (Part No.58980)
from
$4.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
NGK – Spark Plug Wire Set (Part No.54116)
from
$99.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
ACDelco – Coil on Spark Plug Boot (Part No.16116)
from
$13.49
ACDelco Professional Direct Ignition Coil Boots serve as the electrical connection between the coil and the spark plug. They act as insulators, helping keep moisture and contaminants out of the connection, and are a high quality replacement for many vehicles on the road today. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Weather tight boot seal helps protect from moisture intrusion
- High temperature resistant silicone helps protect against thermal overload
- Stainless steel internal spring with resistor suppresses RFI and helps deliver maximum voltage to the spark plug
- Provides the performance and dependability you expect from ACDelco
NGK – Coil on Plug Boot (Part No.58983)
from
$9.79
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Carquest Premium – Multi Purpose Relay (Part No.RAA1937)
from
$17.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ignition Coil (Part No.E405)
from
$80.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured using high-quality materials to provide superior durability and long service life
- Designed and engineered to ensure precise performance
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
- External core made from oriented silicon steel ensures durability and longevity
- Neodymium magnet produces max high voltage output at all speeds
- Stainless steel spring resists corrosion
- Tin-plated brass terminals improve electrical contact and protect against corrosion
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1474)
from
$81.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1019)
from
$73.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Delphi – IGNITION COIL (Part No.GN10309)
from
$105.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Driveworks – Ignition Coil (Part No.26405)
from
$79.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49015)
from
$95.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 6 Count (Part No.EBC1474-6)
from
$361.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
DENSO – Iridium Long Life Spark Plug (Part No.F100046509ND)
from
$13.98
The DENSO Iridium Long Life spark plug was specifically designed for long service life and consistent performance in the latest, most advanced production cars DENSO’s patented iridium alloy is more durable than even platinum, allowing the center electrode to be shrunk to only 0.7mm in diameter. This produces a dramatic improvement in ignitability and spark plug life. Closely related to platinum and exhibiting even tougher qualities, the rare metal iridium is an ideal material for spark plugs. A fine-wire, 0.7mm iridium center electrode is 360-degree laser welded in place using an exclusive DENSO process, and then matched to a platinum ground electrode. This pair of precision-formed, premium-metal electrodes dramatically extends the plug’s useful life.
Product Features:
See More
Product Features:
- Fine-wire iridium center electrode
- Platinum ground electrode
- 360 degree laser-welded spark tip
- Sustained spark performance over 100,000 miles
- Withstands higher pressures and temperatures
NGK – Laser Platinum Spark Plug (Part No.F1000101870NGK)
from
$16.10
NGK Laser Platinum spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. The platinum disc welded to backside of ground electrode provides long life, faster starts and quicker acceleration. Laser Platinum spark plugs provide high ignitability and longer service life.
Product Features:
See More
Product Features:
- Laser welded Platinum center electrode tip
- Platinum disc welded to backside of ground electrode provides long life
- Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
- Faster starts and quicker acceleration
- Better fuel economy and lower emissions
- Best Platinum spark plug available
- Original Equipment Manufacturer approved design
Champion – Platinum Power Spark Plug: Powerful Perfromance, OE Replacement, RC9PYC (Part No.3344)
from
$4.29
Champion® Platinum Power spark plugs deliver powerful performance with their premium design. Featuring a platinum center electrode for long life and a fine-wire center electrode for greater ignitability, these spark plugs ensure optimal performance. The V-trimmed ground electrode promotes sharper spark focus, while the exclusive Heat-Active alloy allows the electrodes to reach optimal temperature. The platinum-tipped center wire resists wear and helps maintain the proper gap specification over the life of the plug, making it a reliable choice for your vehicle.
Product Features:
See More
Product Features:
- Platinum Power- Premium Spark Plug. Powerful Performance.
- Platinum center electrode for long life
- Fine-wire center electrode for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Heat-Active alloy allows electrodes to reach optimal temperature
- Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
- Platinum Center Electrode: The Champion Platinum Power Spark Plug features a platinum center electrode for extended durability and long-lasting performance.
Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, REC10YC4 (Part No.975)
from
$2.29
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
NGK – Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LFR6BHX (Part No.93420)
from
$14.79
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.
Product Features:
See More
Product Features:
- HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
- RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
- PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
- High Ignitability Design: Ensures a more complete fuel burn, resulting in quicker throttle response, smoother idle, and better cold starts.
- Specialized OEM Tip Designs: Features patented DFE and PSPE tip designs for optimal performance in modern vehicles.
- Industry-Leading Durability: Ruthenium center electrode provides exceptional durability, making it a reliable choice for long-term use.
Autolite Iridium – Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability (Part No.AI3923)
from
$10.99
Optimal Performance, Durability, Ignitability. The Autolite Iridium Ultra is an engineered OE replacement iridium spark plug featuring a laser-welded 0.5mm proprietary iridium alloy finewire center electrode that ensures optimal fuel efficiency, acceleration, and focused ignitability. Its nickel-plated shell resists corrosion, while the high-alumina ceramic insulator provides increased strength. Additionally, the proprietary platinum sidewire technology enhances durability and performance, making it a top choice for reliable ignition. It also features a resistor type and a flat seat type for added compatibility and performance.
Product Features:
See More
Product Features:
- Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
- A laser-welded 0.5mm proprietary iridium alloy finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
- Nickel-plated shell to resist corrosion.
- High-alumina ceramic insulator for increased strength.
- Laser welded 0.5mm Iridium finewire center electrode.
- Proprietary platinum sidewire technology.
DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK20HR11 (Part No.3421)
from
$11.49
Manufactured to the strictest OE performance, durability and emissions standards.
Product Features:
See More
Product Features:
- Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
- Platinum ground electrode for extended life
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Sustained spark performance over 100,000 miles
- Lasts up to three times as long as conventional plugs
- Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
- Iridium Long Life
- Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced properties of DENSO’s Iridium alloy.
- Fuel Efficiency: Experience better conservation of fuel at all times, contributing to overall vehicle efficiency and cost savings.
Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP3923)
from
$4.79
With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite Platinum spark plugs are designed and engineered in the USA to deliver exceptional performance. Featuring a high nickel alloy side electrode that maintains a precise gap and a full platinum tip that ensures virtually no gap erosion, these spark plugs offer long-lasting durability. The necked-down center electrode fires quicker and cleaner with less voltage, resulting in easier starts, quicker acceleration, and improved fuel economy compared to standard plugs.
Product Features:
See More
Product Features:
- High nickel alloy side electrode maintains precise gap
- Full platinum tip assures virtually no gap erosion for long life
- Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
- Exceptional Performance: Designed and engineered in the USA, Autolite Platinum Spark Plugs deliver superior performance with over 100 years of engineering expertise and more than 11 billion plugs sold.
- Gasket Seat Type: Equipped with a gasket seat type, these spark plugs provide a secure and effective seal for optimal engine performance.
DENSO – Coil On Plug Boots-4 (Part No.671-4296)
from
$49.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
Professional Parts Sweden – Ignition Wire Set (Part No.F102052246PPS)
from
$65.64
The Professional Parts Sweden Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.
Product Features:
See More
Product Features:
- OEM quality
- OEM connectors for easy Installation.
- Resistant to high temperatures, corrosion and vibration.
- Ignition noise suppressed.
- Reduces the chance of misfire
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7080)
from
$6.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Popular 2003 Saab 9-3 Ignition and Tune-Up Products Categories
2003 Saab 9-3 Ignition and Tune-Up Products
You count on your 2003 Saab 9-3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 32 Ignition and Tune-Up Products ranging in price from $2.99 to $338.99, you’re sure to find everything you need for your 2003 Saab 9-3.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 10 different brands like DENSO, E3, and NGK. 2003 Saab 9-3 Ignition and Tune-Up Products start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,475 extensive product reviews on 2003 Saab 9-3 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PK20PR11 with 5.0 stars and Iridium IX Spark Plug: Single Iridium Fine Wire, BCPR6EIX-11 with 5.0 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2003 Saab 9-3 below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2003 Saab 9-3
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Saab 9-3 running right for years to come. In our inventory you’ll find brands like DENSO, E3, NGK, and even more.
Popular ACDelco Ignition and Tune-Up Products
You’ll find popular ACDelco brand products across Spark Plugs. All are waiting to get your 2003 Saab 9-3 back on the road. Some of the top-rated ACDelco products in these categories are:
Top-Rated DENSO Ignition and Tune-Up Products
If DENSO are what you’re looking for, our inventory holds plenty. We stock DENSO brand Ignition and Tune-Up Products for your 2003 Saab 9-3, and some of our most reviewed DENSO parts include:
from
$10.99
(153)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IK20TT
Spark Plugs
from
$11.79
(55)
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IK20
Spark Plugs
FAQs for 2003 Saab 9-3 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2003 Saab 9-3?
Out of 32 Ignition and Tune-Up Products for the 2003 Saab 9-3, the most popular in our inventory are:
What are the top-rated 2003 Saab 9-3 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2003 Saab 9-3 based on customer reviews/ratings are:
from
$9.99
(5)
Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PK20PR11
“noticed a smoother running engine after installing these. Gap at 1mm, my old plug electrodes were worn.”
from
$11.99
(4)
Iridium IX Spark Plug: Single Iridium Fine Wire, BCPR6EIX-11
“Great Product very satisfied , also the Manager Omar and his Staff at the Oxon Hill MD Store offers great Customer Service.”
from
$5.99
(3)
G-Power Spark Plug: Single Platinum Tip Design, BCPR6EGP
“Used for my car very noticeable difference from the old plugs.”
