2003 Pontiac Grand Prix Belt Tensioners

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:

• Endures the toughest conditions while promoting quieter performance and longer life
• Features a steel pivot tube on specific designs for enhanced stability
• Built to outperform and outlast competitive OE parts
• This tensioner includes the required hardware for proper installation

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

• Endures the toughest conditions while promoting quieter performance and longer life
• Features a steel pivot tube on specific designs for enhanced stability
• Built to outperform and outlast competitive OE parts

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:

• Endures the toughest conditions while promoting quieter performance and longer life
• Features a steel pivot tube on specific designs for enhanced stability
• Built to outperform and outlast competitive OE parts
• The heavy duty cast aluminum spring case resists cracking and fatigue

Litens was the Original Equipment (O.E.) supplier of this General Motors tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is designed with 3 molded locator pins on the base to ensure precise installation location as well as a heavy-duty steel pulley. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use round spring technology and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Litens was the Original Equipment (O.E.) supplier of this popular General Motors water-passage tensioner. This “.OE. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. (*OE Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design) Note: The base plate cover differs in color from the O.E plate. As the OE supplier, Litens uses sophisticated equipment to pressure test each and every tensioner to ensure leak-free performance. This test is specified by GM and is critical to leak free performance. Most non-OE suppliers do not have this equipment and do not test for leaks. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. This popular tensioner designed for General Motors vehicles, looks, fits, and performs like the original part being replaced. The Litens part maintains the original equipment steel pulley for optimal performance and life. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Dayco No Slack Automatic Belt Tensioners are built to outperform and outlast competitive OE parts. The heavy duty cast aluminum spring case resists cracking and fatigue. Each component is built to resist rust, endure the toughest of conditions while promoting quieter performance and longer life. This tensioner contains a metallic locator pin built to withstand extreme drive demands and properly locate the tensioner for installation.

Product Features:

• The heavy duty cast aluminum spring case resists cracking and fatigue
• Contains a metallic locator pin built to withstand extreme drive demands and properly locate the tensioner for installation
• Includes installation instructions
• Rust resistant construction

Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.

Product Features:

• Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
• Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
• Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
• Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
• Torsional round spring design provides reliability as well as consistent tension
• Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.

Litens was the Original Equipment (O.E.) supplier of this popular General Motors water-passage tensioner. This “.OE. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. (*OE Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design) Note: As the OE supplier, Litens uses sophisticated equipment to pressure test each and every tensioner to ensure leak-free performance. This test is specified by GM and is critical to leak free performance. Most non-OE suppliers do not have this equipment and do not test for leaks. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:

• Endures the toughest conditions while promoting quieter performance and longer life
• Features a steel pivot tube on specific designs for enhanced stability
• Built to outperform and outlast competitive OE parts
• The heavy duty cast aluminum spring case resists cracking and fatigue

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:

• Endures the toughest conditions while promoting quieter performance and longer life
• Features a steel pivot tube on specific designs for enhanced stability
• Built to outperform and outlast competitive OE parts
• Made in the USA

Litens was an Original Equipment (O.E.) supplier of this part and offers this “OE Exact”* part for the aftermarket. This popular tensioner designed for General Motors vehicles, looks, fits, and performs like the original part being replaced. The Litens product maintains its original steel pulley and molded locator pin.*OE Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Choosing the Correct Replacement Part – The OE part for this application used either a round spring or flat spring design. The Litens aftermarket part maintains the round spring design and meets all fit and performance specs Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Litens Automotive is the original equipment supplier of this tensioner to GM. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The Litens replacement part maintains the heavy duty steel pulley, the integrated location pin, and the internal damping components specified by General Motors. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Litens was the Original Equipment (O.E.) supplier of this General Motors tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This Litens tensioner has incorporated a flat washer type pulley-bearing dust shield. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.