2003 Nissan Sentra Steering and Chassis Parts

Below you will find various in-demand Nissan Steering and Chassis Parts, components and accessories for your 2003 Sentra. Advance Auto Parts has popular Sentra parts like Power Steering Parts, Steering Hardwares, Tie Rods and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Sentra model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2003 Nissan Sentra Steering and Chassis Parts below and start saving instantly.

Popular 2003 Nissan Sentra Steering and Chassis Parts Categories

Power Steering Coolers

Suspension Ball Joint Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Alignment Caster Adjustment Spacers

Caster and Camber Kits

Power Steering Reservoir Caps

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Camber Kits

Power Steering Pressure Switches

Power Steering Pump Caps

Power Steering Reservoirs

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Rack and Pinion Boots

Sway Bar Bushings

Power Steering Pressure Sensors

Power Steering Reservoir Hoses

Power Steering Pump Seal Kits

Alignment Camber Bolt Assortments

Essential Steering and Chassis Parts for 2003 Nissan Sentras

from

$163.99

Product Features:

Ideal solution – this sensor replaces an original sensor that is leaking or has failed due to fatigue, and helps restore proper monitoring of hydraulic pressure in the power steering system.
Ensure fit – matches the fit, function and performance of the original power steering pressure sensor on specified vehicles
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$199.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$60.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$74.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$40.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$17.49

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$27.49

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$434.99

Can solve excessive tire wear and steering issues
Provides like-new steering, ease of installation and longer life
Can bring vehicles back to factory specification
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features

from

$11.49

Camber Bolt Kit

from

$44.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$25.99

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$132.99

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

100% testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$38.99

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:

Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$14.99

Rein OE Quality power steering suction hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering suction hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

A direct fit, replacement hose with clamps
OE quality, braided rubber compound hose
Pre attached protective jacket(s) and heat sleeve(s), where required
Ensures proper operation of the power steering system

from

$28.99

POWER STEERINGFILTER

from

$25.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$23.29

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$9.53

P/S Hose Fitting

from

$135.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$21.99

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$43.49

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$354.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$54.99

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$20.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$98.67

P S Oil Pressure Swi

from

$42.41

Tie Rod End

from

$59.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

Upgrade your 2003 Nissan Sentra with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2003 Nissan Sentra, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Sentra functioning at its best. At Advance Auto Parts, we offer a wide selection of 98 Steering and Chassis Parts for the 2003 Nissan Sentra, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Steering Hardware upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2003 Nissan Sentra at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.54 to $483.79, with an average price of $73.29. Our 98 Steering and Chassis Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 2003 Nissan Sentra without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Nissan Sentra, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Carquest Premium, Cardone, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Carquest Premium and Cardone also bring quality to the table, with Steering and Chassis Parts available starting at $2.99, and at an average 4 stars rating. With 1,683 customer reviews and counting, our 2003 Nissan Sentra Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2003 Nissan Sentra is always ready to roll. We’re committed to providing you with everything you need to keep your Sentra in top shape, all in one place. Start shopping confidently below for your 2003 Nissan Sentra!

Best-Selling Power Steering Parts for 2003 Nissan Sentras

Enhance the driving experience in your Nissan with 55 quality Power Steering Part components, starting at $2.99.

show more show less

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$39.99

from

$184.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$44.99

from

$246.03

Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:

OEM-Quality and Direct Fit replacement
Components are inspected and cleaned of rust and corrosion.
Shaft and internal surfaces are inspected, reconditioned and polished.
Seals and O-rings are replaced with new, OE-equivalent parts.
Assembled units are 100% functionally tested for leaks and performance.

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$46.49

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$354.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$207.99

from

$7.79

from

$2.99

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$52.99

from

$54.99

Rein Automotive pressure sensors are made to factory specifications ensuring proper fit, form and function. A working pressure sensor is used to monitor the particle filter. The sensor alerts that the particle filter is starting to get clogged due to carbon build up. A build up in the exhaust can cause excessive back pressure damaging engine components. Rein pressure sensors are constructed from materials that meet factory OE requirements. Our quality pressure sensors filters aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE component.

Product Features:

Direct replacement
Designed to meet or exceed factory specifications.
Made using high quality materials.
Uses vehicle specific style connector for quick replacement.

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$29.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$413.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$118.39

P/S Oil Pressure Swi

from

$177.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$132.99

100% testing ensures leak-free performance.
Designed to match O.E. fit, function and performance.
Manufactured from O.E. grade material for strength and durability.
Resistant to cracking caused by the high temperatures in the engine compartment.
Reservoirs with integrated filter have the same filtration efficiency as O.E.

from

$144.99

from

$27.49

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$98.67

P S Oil Pressure Swi

from

$57.99

from

$14.99

A direct fit, replacement hose with clamps
OE quality, braided rubber compound hose
Pre attached protective jacket(s) and heat sleeve(s), where required
Ensures proper operation of the power steering system

from

$483.79

Steering Rack

from

$449.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$308.05

To ensure the highest level of performance and long service life, Omega power steering hose assemblies are built and tested to the most stringent specifications in the industry, meeting or exceeding all OEM standards.

Product Features:

OEM Style replacement assembly is designed to fit your car exactly like the unit you are replacing.
All o-rings, sealing washers, adapters and mounting hardware necessary for installation are included.

from

$252.33

Import Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE new reservoirs offer installers a stand-alone replacement solution or complement a power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

100% testing ensures leak-free performance.
New reservoir cap is included.
O.E. design is strictly followed to ensure proper fit and function.

from

$239.60

OEM Style replacement assembly is designed to fit your car exactly like the unit you are replacing.
All o-rings, sealing washers, adapters and mounting hardware necessary for installation are included.

from

$221.99

from

$219.99

This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:

Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
Complete assembly – includes reservoir and reservoir cap.
Reliable performance – built to withstand excessive heat and vibration
Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life

from

$213.99

from

$196.99

NEW P/S PUMP

from

$192.87

P/S Pump

from

$189.99

NEW P/S PUMP

from

$127.99

from

$95.99

from

$53.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$44.86

P/S Reservoir

from

$41.29

P/S Return Hose

from

$40.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$29.37

P/S Return Hose

Top Picks for 2003 Nissan Sentra Tie Rods

Upgrade Nissan Sentras with top-quality Tie Rods parts, including 12 OEM and aftermarket selections for your 2003 model.

show more show less

from

$59.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$31.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$25.49

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$12.49

Tie Rod End

from

$80.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$48.99

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

from

$81.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$74.97

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features

from

$52.39

Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

from

$43.36

QSTEN tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. QSTEN tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

from

$42.41

Tie Rod End

from

$8.61

FEQ tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. FEQ tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

In-Demand Ball Joints for 2003 Nissan Sentras

Select from 10 premium Ball Joints parts for your 2003 Nissan Sentra, with prices ranging from $35.99 to $154.99.

show more show less

from

$154.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$129.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$43.49

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$54.99

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$139.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength durability and confidence is required.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$101.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$97.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$38.81

Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

from

$38.81

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$35.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

Most Sold 2003 Nissan Sentra Sway Bars

Explore our best-selling Nissan parts for the 2003 Sentra among 14 OEM and aftermarket options starting from $2.54.

show more show less

from

$31.49

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$40.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$52.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$18.49

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$11.49

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$77.99

Knock, knock, knock! That’s the sound you hear when your sway bar links are not doing their job. Links are a common service item due to either worn or over compliant bushings/ joints and possibly bent or snapped centre bodies. Upgrade from the old units to Whiteline sway bar links with superior features that outlast and outperform the original equipment.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Manufactured from high quality steel and utilise the latest technology synthetic elastomer link bushings ensuring maximum strength and durability.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$57.94

TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$52.05

Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
Provides improved fuel economy, lower emissions and excellent driving comfort
Reduce weight and damping vibrations
Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions

from

$28.49

Matches OE form, fit and function
Bushings are resistant to heat, wear, salt, road grime, and oils
Made from a high grade rubber compound
Quality construction for durability
Application specific for this vehicle

from

$17.64

The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$17.29

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$9.20

The Lemfoerder Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$5.62

Sway Bar Bushing Kit

from

$2.54

The Original Equipment Sway Bar Link Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration. The Original Equipment Sway Bar Link Bushing is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

Top-Rated Steering and Chassis Parts Brands For Your 2003 Nissan Sentra

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2003 Nissan Sentras. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Carquest Premium, and Cardone, and more. Steering and Chassis Parts from these brands that fit a 2003 Sentra start at just $2.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2003 Nissan Sentra Steering and Chassis Parts

When it comes to maintaining or upgrading your 2003 Nissan Sentra, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2003 Nissan Sentra. With over 4 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.32. Plus, with over 208 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Popular Carquest Premium 2003 Nissan Sentra Steering and Chassis Parts

Carquest Premium auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2003 Nissan Sentra owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2003 Sentra, Advance Auto Parts carries a full inventory of 15 Carquest Premium Steering and Chassis Parts. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Carquest Premium Steering and Chassis Parts range from $2.99 to $221.99, plus, with more than 31 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$52.99

This product is not rated

3/8" I.D. Return Hose J189

“”

from
$2.99

This product is not rated

3/8" ID Return Hose (sold by each)

“”

from
$7.79

This product is not rated

3/8" I.D. Return Hose (J189) (sold by foot)

“”

FAQs for 2003 Nissan Sentra Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2003 Nissan Sentras?

Out of 98 Steering and Chassis Parts that fit 2003 Nissan Sentras, the following parts are the top sellers:

3/8" I.D. Return Hose (J189) (sold by foot) (5190122) – $7.79
New Power Steering Filter (10417593) – $31.99
3/8" ID Return Hose (sold by each) (18070570) – $2.99

What’s the price range for 2003 Nissan Sentra Steering and Chassis Parts?

Steering and Chassis Part prices for the 2003 Nissan Sentra start at $2.54 and go up to $483.79 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2003 Nissan Sentra?

The average price for Steering and Chassis Parts for the 2003 Nissan Sentra is $73.29. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Nissan Sentra model years?

Yes, we currently carry Steering and Chassis Parts for 42 model years of Nissan Sentras between 1982 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Steering and Chassis Parts for my 2003 Nissan Sentra?

The cheapest 2003 Nissan Sentra Steering and Chassis Parts we carry in stock are:

Sway Bar Link Bushing (11940466) – $2.54
3/8" ID Return Hose (sold by each) (18070570) – $2.99
Sway Bar Bushing Kit (12598472) – $5.62
POWER STEERINGFILTER (50167394) – $6.99
3/8" I.D. Return Hose (J189) (sold by foot) (5190122) – $7.79

What are the top-rated Steering and Chassis Parts that fit the 2003 Nissan Sentra?

Out of 1,683 reviews by customers, our 2003 Nissan Sentra Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2003 Nissan Sentra and their top-rated products:

Tie Rods
- Tie Rod End (20973550) – $59.99
- Steering Tie Rod End (15530294) – $31.99
- Steering Tie Rod End (15510447) – $25.49
Sway Bars
- Tie Rod End (20973550) – $59.99
- Steering Tie Rod End (15530294) – $31.99
- Steering Tie Rod End (15510447) – $25.49

What types of Steering and Chassis Parts do you sell for my 2003 Nissan Sentra?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2003 Nissan Sentra:

Can I get help with 2003 Nissan Sentra Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Steering and Chassis Parts and more.

What is your return policy for Nissan Sentra Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Nissan Sentra Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2003 Nissan Sentra Steering and Chassis Parts

Dorman – POWER STEERING SENSR (Part No.926-455)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Cardone – Remanufactured Power Steering Pump (Part No.21-5798)

Rare Parts – Sway Bar Bushing (Part No.RP16861)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Female x 16mm Banjo (Part No.36052)

MOOG – Stabilizer Bar Link (Part No.K9543)

MOOG – Camber Adjusting Kit (Part No.K7256)

Dorman – Power Steering Pump Pulley (Part No.300-551)

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Driveworks – Camber Bolt Kit (Part No.DW-K7256)

Energy Suspension – Sway Bar Bushing Set (Part No.7.5116R)

Dorman – Help – Power Steering Cap (Part No.99979)

Cardone New – New Power Steering Reservoir (Part No.3R-001)

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA303)

Rein – Power Steering Suction Hose (Part No.PSH0530)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Powercraft – Pump Seal Kit (Part No.8942)

Driveworks – Tie Rod End (Part No.DW-ES3438)

Omega – P/S Hose Fitting (Part No.M20231467173OME)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620374)

Dorman – Help – Power Steering Cap (Part No.99979CD)

MOOG – Ball Joint (Part No.K90434)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3018)

MOOG – Ball Joint (Part No.K500338)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3069)

Original Equipment – P S Oil Pressure Swi (Part No.M2095408572OEA)

Sankei 555 – Tie Rod End (Part No.M3010152754SNK)

MOOG – Tie Rod End (Part No.ES2814RL)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36196)

Cardone – Remanufactured Power Steering Pump (Part No.21-5346)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Female Inv. Flare x 16mm Banjo – with Switch Port (Part No.36448)

Maval – Power Steering Pump, Remanufactured (Part No.M2010315969MAV)

Imperial – Mounting Kit System (Part No.226201)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Imperial – Power Steering Oil Cooler (Part No.241009)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3018)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo – with Switch Port (Part No.37479)

Carquest Premium – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

Cardone – Power Steering Filter (Part No.20-P038F)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36197)

Rein – Pressure Sensor (Part No.ELP0280)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Powercraft – Pump Seal Kit (Part No.8799)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3019)

Rein – P/S Oil Pressure Swi (Part No.M2095408572RIN)

Cardone – Remanufactured Power Steering Pump (Part No.21-5304)

Cardone New – New Power Steering Reservoir (Part No.3R-001)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo – with Switch Port (Part No.40057)

Dorman – Power Steering Pump Pulley (Part No.300-551)

Original Equipment – P S Oil Pressure Swi (Part No.M2095408572OEA)

Carquest Premium – Power Steering Pressure Tube Assembly, 14mm Male Inv. Flare x 14mm Male "O" Ring (Part No.36383)

Rein – Power Steering Suction Hose (Part No.PSH0530)

Cardone – Steering Rack (Part No.M1000899831CAR)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-3047)

Omega – Power Steering Pressure Line Hose Assembly (Part No.M2015153104OME)

Cardone – Power Steering Reservoir – New (Part No.M2030257698CAR)

Omega – Power Steering Pressure Line Hose Assembly (Part No.M2015455153OME)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Female Inv. Flare x 16mm Banjo – with Switch Port (Part No.36382)

Dorman – Power Steering Reservoir (Part No.603-825)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo – with Switch Port (Part No.40045)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5578N)

Cardone – P/S Pump (Part No.M2010901033CAR)

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5683N)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo (Part No.40058)

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Female Inv. Flare x 16mm Banjo (Part No.36384)

Carquest Premium – Pressure Tube Assembly, 14mm Male Inv. Flare x 14mm Male "O" Ring (Part No.36385)

Cardone – P/S Reservoir (Part No.M20302149815CAR)

Rein – P/S Return Hose (Part No.M2016304042RIN)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1034)

Autopart International Inc – P/S Return Hose (Part No.M20161991706API)

Dorman – Help – Power Steering Cap (Part No.99979)

MOOG – Tie Rod End (Part No.ES2814RL)

Driveworks – Steering Tie Rod End (Part No.DW-ES2814RL)