2003 Nissan Pathfinder Drivetrains

Below you will find various in-demand Nissan Drivetrains, components and accessories for your 2003 Pathfinder. Advance Auto Parts has popular Pathfinder parts like Differentials, Transfer Cases, Drive Shafts and Axles and more. You’ll also find aftermarket and OEM Drivetrains for other Pathfinder model years including 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2022 and more. Select a category of 2003 Nissan Pathfinder Drivetrains below and start saving instantly.

Popular 2003 Nissan Pathfinder Drivetrains Categories

Differential Oil

U-Joints

Drive Shaft and Axles

Drive Shaft Center Supports

Differential Covers

Drive and Prop Shaft Assemblies

Differential Bearings

Bearing Pullers

Axle Shaft Seals

OE CV Boot Kits

U-Joint Centering Yokes

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Pinion Seals

Rear Axle Shaft Bearings

Differential Ring and Pinions

CV Quick Boot Kits

Drive Shaft Repair Kits

Differential Spools

Transfer Case Output Shaft Bearings

Differential Seals

Differential Ring Gear Bolts

Input Shaft Seals

Differential Crush Sleeves

Pinion Shaft Seals

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Drive Pinion Oil Deflectors

Differential Pinion Gear Washers

CV Joint Boot Bands

Essential Drivetrains for 2003 Nissan Pathfinders

from

$53.29

Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of driveshaft mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:

USA Development and OEM laboratory – 14 OEM Engineers
Design Solutions and Installation Enhancements to Failing OEM designs
Complete Factory Testing and Vehicle Verification Resources

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$1119.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:

Fits Nissan Titan rear
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$334.99

Product Features:

Fits 2004-2007 Nissan Titan rear
29 spline
Round companion flange

from

$609.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Nissan Titan front
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.

from

$7.99

Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:

Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
7/8″ x 14 thread
1 5/16″ socket

from

$42.99

Product Features:

Cross pin shaft
Fits Nissan Titan front

from

$39.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$24.79

BEARING

from

$47.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$11.10

Differential Seal

from

$709.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits Nissan Titan rear
8.50″ ring gear diameter
24 spline pinion
10 ring gear bolts
3.36 ratio

from

$46.99

Nissan Titan crush sleeve, front differential. Approx 1.400″ long.

Product Features:

Crush sleeve
Fits Nissan Titan rear
1.400″ tall

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$12.99

Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:

Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
Reduces friction and metal-to-metal contact for peak engine performance
Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.

from

$5.61

Clamp – CV Boot

from

$932.99

The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Rear Driveshaft Assembly.
Rear Drive Shaft: OE Fix.
Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance

from

$39.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$4.74

Input Shaft Seal

from

$729.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. This unit uses a heavy-duty cross pin.

Product Features:

Fits Nissan M226 rear
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$16.99

Product Features:

Ring gear bolt
Fits M205 Nissan front

from

$132.37

Axle Assembly

from

$29.15

With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$24.14

You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.

Product Features:

Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
The flanged design allows for easier and proper installation and helps avoid cocking.
The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$28.18

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

Upgrade your 2003 Nissan Pathfinder with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2003 Nissan Pathfinder, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Drivetrains are key to keeping your Pathfinder functioning at its best. At Advance Auto Parts, we offer a wide selection of 94 Drivetrains for the 2003 Nissan Pathfinder, designed to meet your needs without breaking the bank. From Differential replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2003 Nissan Pathfinder at great prices. Our Drivetrains inventory for this model ranges from just $2.02 to $1,119.99, with an average price of $202.72. Our 94 Drivetrains in stock come from 25 trusted brands, so you’re sure to find the right part for your 2003 Nissan Pathfinder without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Nissan Pathfinder, we stock popular OEM and aftermarket Drivetrains from top names like Moog, Driveworks, Dorman, and more. Moog Drivetrains start at just $19.99 and boast an impressive 4 stars average rating from customers. Driveworks and Dorman also bring quality to the table, with Drivetrains available starting at $6.29, and at an average 4 stars rating. With 468 customer reviews and counting, our 2003 Nissan Pathfinder Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2003 Nissan Pathfinder is always ready to roll. We’re committed to providing you with everything you need to keep your Pathfinder in top shape, all in one place. Start shopping confidently below for your 2003 Nissan Pathfinder!

Best-Selling Differentials for 2003 Nissan Pathfinders

Enhance the driving experience in your Nissan with 48 quality Differential components, starting at $2.02.

show more show less

from

$39.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$7.49

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$51.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$39.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$27.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
ABS magnet included if applicable
Made with high quality materials
Quality construction for durability
Application specific for this vehicle

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$19.79

Axle Diff. Seal

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$6.29

Product Features:

Brand may vary by location

from

$59.99

Nissan Titan Spartan locker cross pin shaft.

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits Nissan Titan rear
Works with Spartan Locker or standard open spider gears

from

$6.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$5.99

Replacement Crush Sleeve for GM 7.6″ IRS, 8.5″, 8.6″, 8.75″, 8.875″ & Nissan Titan rear. Approx 0.620″ long.

Product Features:

Crush sleeve for Jeep JK rear, GM 7.6″ IRS, 8.5″ and 8.6″ and Nissan Titan rear
0.620″ tall

from

$60.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$469.99

Fits Nissan Titan rear
8.5″ ring gear diameter
24 spline pinion
10 ring gear bolts
3.13 ratio

from

$459.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Nissan Titan rear
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and silicone.

from

$729.99

Fits Nissan M226 rear
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$1119.99

Fits Nissan Titan rear
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$709.99

Fits Nissan Titan rear
8.50″ ring gear diameter
24 spline pinion
10 ring gear bolts
3.36 ratio

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$654.99

Ring and Pinion Kit

from

$615.99

Fits Nissan Titan rear
8.5″ ring gear diameter
24 spline pinion
10 ring gear bolts
2.94 ratio

from

$589.99

Ring and Pinion Kit

from

$589.99

Fits Nissan Titan rear
8.5″ ring gear diameter
24 spline pinion
10 ring gear bolts
3.54 ratio

from

$531.99

Ring&Pinion Gear Set

from

$499.99

RngPnnKt

from

$499.99

RngPnnKt

from

$489.99

RngPnnKt

from

$419.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Nissan M226 rear
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush, silicone and gasket.

from

$189.99

Product Features:

Fits Nissan Titan rear
Steel

from

$120.81

Differential Pinion

from

$61.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$61.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$54.99

Differential Crush S

from

$23.99

Product Features:

Brand may vary by location

from

$23.79

CONE

from

$22.14

Differential Seal

from

$15.89

Pinion Seal

from

$15.40

Differential Seal

from

$14.90

Pinion Seal

from

$11.10

Differential Seal

from

$10.99

Ring gear bolt for Jeep JK front & rear and Nissan Titan rear, 1/2″.

Product Features:

Ring gear bolt for Jeep JK front and Nissan Titan rear
1/2″ bolt

from

$7.99

Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:

Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
7/8″ x 14 thread
1 5/16″ socket

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$2.02

Nut

Most Popular 2003 Nissan Pathfinder Transfer Cases

Customize your Nissan with 6 Transfer Cases products like Transfer Case Output Shaft Seals, Input Shaft Seals, and Transfer Case Output Shaft Bearings, all priced under $107.25.

show more show less

from

$107.25

Mainshaft Bearing

from

$14.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.71

Transmission Case Shaft Seal

from

$10.33

Trans Case Shaft Sea

from

$7.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$4.74

Input Shaft Seal

Top Picks for 2003 Nissan Pathfinder Drive Shafts and Axles

Upgrade Nissan Pathfinders with top-quality Drive Shafts and Axles parts, including 19 OEM and aftermarket selections for your 2003 model.

show more show less

from

$171.99

All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands

from

$51.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$883.99

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$1091.98

A highly cost-effective, innovative repair solution, Dorman’s Driveshaft Assembly is engineered with a serviceable universal joint. When the u-joint fails, as is common with normal use, simply replace the u-joint – rather than replacing the entire assembly.

Product Features:

Dorman-engineered from 100% new materials and rigorously tested for long-lasting durability
Coated for extended resistance to rust and corrosion
Dorman Drop Ship Drive Shafts are made, balanced and tested in the USA
Direct replacement for a proper fit

from

$1068.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$932.99

Rear Driveshaft Assembly.
Rear Drive Shaft: OE Fix.
Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance

from

$842.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$728.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$696.99

Rear Driveshaft Assembly
Rear Drive Shaft: OE Fix
Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance

from

$491.99

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation.
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance.
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$216.19

The Timken Driveshaft Support is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$129.72

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:

For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.

from

$86.86

Wheel Bearing

from

$44.49

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST — Advanced heat treatment process for strength
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$34.79

Axle Seal

from

$24.14

Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
The flanged design allows for easier and proper installation and helps avoid cocking.
The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.

from

$14.28

Wheel Seal

from

$11.04

Payen offers an extensive range of dynamic oil and valve stem seals for both light-duty and commercial vehicles. These feature our latest Polytetrafluoroethylene (PTFE) oil seal technology, as well as the integrated crank seals found in other Payen gasket sets.

Product Features:

Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
The flanged design allows for easier and proper installation and helps avoid cocking.
The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.

In-Demand Universal Joints for 2003 Nissan Pathfinders

Select from 12 premium Universal Joints parts for your 2003 Nissan Pathfinder, with prices ranging from $15.99 to $334.99.

show more show less

from

$23.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$19.99

Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$32.99

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$32.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$24.99

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates?
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Bearing cups ground and slightly oversized to fit in a used drive shaft
Cross forging shape and flash provide easier installation and high strength

from

$45.39

Designed and built by GMB to handle the highest loads and excessive torque found in pickups, SUVs, 4x4s and off road vehicles.

Product Features:

Elliptical bearing design delivers reliable performance under the heaviest of loads
Exclusive GMB Ultra-select bearing design exceeds OE specification
Precision finish trunnions and bearing surfaces ensure durability
Proven reliability in off-road conditions and harsh environments

from

$15.99

DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$32.12

Designed and built by GMB to handle the highest loads and excessive torque found in pickups, SUVs, 4x4s and off road vehicles.

Product Features:

Elliptical bearing design delivers reliable performance under the heaviest of loads
Exclusive GMB Ultra-select bearing design exceeds OE specification
Precision finish trunnions and bearing surfaces ensure durability
Proven reliability in off-road conditions and harsh environments

from

$334.99

Product Features:

Fits 2004-2007 Nissan Titan rear
29 spline
Round companion flange

from

$178.99

Product Features:

Fits Nissan Titan rear
24 spline
Round companion flange

from

$47.99

Universal Joint

from

$24.38

U Joint

Most Sold 2003 Nissan Pathfinder CV Axles and Joints

Explore our best-selling Nissan parts for the 2003 Pathfinder among 9 OEM and aftermarket options starting from $2.27.

show more show less

from

$32.99

This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.12

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$28.18

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$28.99

Matches OE form, fit and function
One piece neoprene boot
Kit complete with boot, grease, and hardware for complete installation
Hardware matches original design requirements
Application specific for this vehicle

from

$41.99

Matches OE form, fit and function
One piece neoprene boot
Kit complete with boot, grease, and hardware for complete installation
Hardware matches original design requirements
Application specific for this vehicle

from

$5.61

Clamp – CV Boot

from

$2.39

Clamp – CV Boot

from

$2.27

Clamp – CV Boot

Top-Rated Drivetrains Brands For Your 2003 Nissan Pathfinder

Shop for the best-rated brands offering Drivetrains and other products for your 2003 Nissan Pathfinders. Below you’ll find some of our best rated Drivetrains from Moog, Driveworks, and Dorman, and more. Drivetrains from these brands that fit a 2003 Pathfinder start at just $6.29 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2003 Nissan Pathfinder Drivetrains

When it comes to maintaining or upgrading your 2003 Nissan Pathfinder, using quality Drivetrains is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Drivetrains, specifically designed for the 2003 Nissan Pathfinder. With over 5 Moog brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.99, with an average price of just $26.99. Plus, with over 151 customer reviews and an average rating of 4 stars, you can trust that our Moog Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$23.99

(1)

Greaseable Premium Universal Joint

“great fit”

from
$32.99

(28)

Non-Greaseable Super Strength Universal Joint

“installed as needed”

from
$19.99

(82)

Greaseable Premium Universal Joint

“Great product”

Popular Driveworks 2003 Nissan Pathfinder Drivetrains

Driveworks auto parts is one of the highest quality Drivetrain brands in the market. Any 2003 Nissan Pathfinder owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2003 Pathfinder, Advance Auto Parts carries a full inventory of 4 Driveworks Drivetrains. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Driveworks Drivetrains range from $6.29 to $23.99, plus, with more than 33 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$6.29

This product is not rated

Tapered Roller Bearing

“”

from
$23.99

This product is not rated

Camshaft Seal

“”

from
$6.49

This product is not rated

Oil Seal

“”

FAQs for 2003 Nissan Pathfinder Drivetrains

Which Drivetrains are best-sellers for 2003 Nissan Pathfinders?

Out of 94 Drivetrains that fit 2003 Nissan Pathfinders, the following parts are the top sellers:

Universal Joint (10265714) – $15.99
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (15830005) – $32.99
3 Qt – 80W90 Conventional Gear Oil With Posi Additive (11645418) – $57.99

What’s the price range for 2003 Nissan Pathfinder Drivetrains?

Drivetrain prices for the 2003 Nissan Pathfinder start at $2.02 and go up to $1,119.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2003 Nissan Pathfinder?

The average price for Drivetrains for the 2003 Nissan Pathfinder is $202.72. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Nissan Pathfinder model years?

Yes, we currently carry Drivetrains for 37 model years of Nissan Pathfinders between 1987 and 2025. Drivetrains are bought most frequently for the following model years: 2022, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Drivetrains for my 2003 Nissan Pathfinder?

The cheapest 2003 Nissan Pathfinder Drivetrains we carry in stock are:

Nut (12503907) – $2.02
Clamp – CV Boot (11837437) – $2.27
Clamp – CV Boot (11837237) – $2.39
Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (11643194) – $3.99
Input Shaft Seal (10749622) – $4.74

What are the top-rated Drivetrains that fit the 2003 Nissan Pathfinder?

Out of 468 reviews by customers, our 2003 Nissan Pathfinder Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2003 Nissan Pathfinder and their top-rated products:

Differentials
- Differential Pinion Shim Kit (20520100) – $7.49
- Shaft Repair Sleeve (18445088) – $39.99
- Bearings (3273970) – $51.99
Universal Joints
- Differential Pinion Shim Kit (20520100) – $7.49
- Shaft Repair Sleeve (18445088) – $39.99
- Bearings (3273970) – $51.99

What types of Drivetrains do you sell for my 2003 Nissan Pathfinder?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2003 Nissan Pathfinder:

Can I get help with 2003 Nissan Pathfinder Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Drivetrains and more.

What is your return policy for Nissan Pathfinder Drivetrains?

Advance Auto Parts keeps returns simple. For new Nissan Pathfinder Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2003 Nissan Pathfinder Drivetrains

DEA – Driveshaft Support (Part No.K1030153167DEA)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

Yukon Gear – Grizzly Locker For Nissan Titan Rear With 32 Splines (Part No.28028)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Yukon Gear – Replacement Pinion Flange For Dana 44, ’04-’07 Nissan Titan Rear (Part No.41188)

Yukon Gear – Master Overhaul Kit For Nissan Titan Front Differential (Part No.14171)

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Yukon Gear – Cross Pin Shaft For Nissan Titan N205 Front (Part No.33537)

National – Shaft Repair Sleeve (Part No.99139)

FAG US – BEARING (Part No.6208-C3)

National – Bearings (Part No.HM803146)

NOK – Differential Seal (Part No.J7040323764NOK)

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.36 Ratio (Part No.24583)

Yukon Gear – Nissan Titan Crush Sleeve (Part No.33129)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

Ohno – Clamp – CV Boot (Part No.4I250142473OHN)

Dorman – Rear Drive Shaft: OE Fix (Part No.946-240)

National – Shaft Repair Sleeve (Part No.99177)

Payen – Input Shaft Seal (Part No.J1156113348PAY)

USA Standard Gear – Spartan Locker for Nissan M226 Rear with 32 Spline (Part No.17009)

Yukon Gear – Ring Gear Bolt For Nissan Titan Front Differential (Part No.33073)

Autopart International Inc – Axle Assembly (Part No.K40001934006API)

EMPI – RE CV Joint Boot Kit (Part No.K6010181568EMP)

Corteco – Axle Seal (Part No.K402120072CFW)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

EMPI – RE CV Joint Boot Kit (Part No.K6010181459EMP)

National – Shaft Repair Sleeve (Part No.99139)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

National – Bearings (Part No.32307)

National – Bearings (Part No.208)

Beck/Arnley – Wheel Bearing (Part No.051-3936)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

National – Axle Diff. Seal (Part No.711070)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

USA Standard Gear – Nissan Titan Spartan Locker Cross Pin Shaft (Part No.17027)

Driveworks – Oil Seal (Part No.S-223542)

Yukon Gear – Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (Part No.33097)

National – Bearings (Part No.KC-11445-Y)

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.13 Ratio (Part No.24584)

Yukon Gear – Master Overhaul Kit For Nissan Titan Rear Differential (Part No.14172)

USA Standard Gear – Spartan Locker for Nissan M226 Rear with 32 Spline (Part No.17009)

Yukon Gear – Grizzly Locker For Nissan Titan Rear With 32 Splines (Part No.28028)

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.36 Ratio (Part No.24583)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Ring and Pinion Kit (Part No.24665)

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 2.94 Ratio (Part No.24582)

Yukon Gear – Ring and Pinion Kit (Part No.24666)

Yukon Gear – Ring & Pinion Set For ’08 & Up Nissan Titan Rear, 3.54 Ratio (Part No.24585)

Yukon Gear – Ring&Pinion Gear Set (Part No.24776)

Yukon Gear – RngPnnKt (Part No.24706)

Yukon Gear – RngPnnKt (Part No.24704)

Yukon Gear – RngPnnKt (Part No.24705)

USA Standard Gear – Master Overhaul Kit for Nissan M226 Rear Differential (Part No.37104)

Yukon Gear – Steel Cover For Nissan Titan M226 Rear (Part No.32334)

NTN – Differential Pinion (Part No.J7020164790NTN)

National – Bearings (Part No.30209-C)

National – Bearings (Part No.32308-C)

Yukon Gear – Differential Crush S (Part No.55077)

Driveworks – Camshaft Seal (Part No.S-99139)

FAG US – CONE (Part No.KLM603049)

NDK – Differential Seal (Part No.J704084575NDK)

NOK – Pinion Seal (Part No.J7010153152NOK)

NDK – Differential Seal (Part No.J704084572NDK)

NOK – Pinion Seal (Part No.J7010153150NOK)

NOK – Differential Seal (Part No.J7040323764NOK)

Yukon Gear – Ring Gear Bolt, 1/2" (Part No.33036)

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Original Equipment – Nut (Part No.Y20021318398OEA)

SKF – Mainshaft Bearing (Part No.J105448750SKF)

National – Multi Purpose Seal (Part No.710113)

NOK – Transmission Case Shaft Seal (Part No.J5088157262NOK)