2003 Lincoln Aviator Drivetrains
More 2003 Lincoln Aviator Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2003 Lincoln Aviator, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2003 Lincoln Aviator Drivetrains
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Bearings (Part No.FC-66998)
from
$10.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Axle Stud , 58Mm X M14-2.0 (Part No.33557)
Timken – Wheel Bearing (Part No.K80001175562TIM)
from
$22.39
Timken fuel efficient bearings are used in automotive axles to improve fuel economy, reduce weight, lower operating temperatures, minimize noise and increase reliability. Engineered surfaces help protect bearing components by minimizing skidding and sliding damage while withstanding small-particle contamination.
Product Features:
See More
Product Features:
- OE Quality
- Made from quality Timken certified steel
- Design features original equipment technology that optimizes bearing performance and lengthens maintenance intervals
- Design allows bearings to carry evenly distributed loads
- Power dense design reduces bearing weight
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.521000)
from
$169.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Motive Gear – Differential Carrier Gear Kit (Part No.F8.8BI)
National – Bearings (Part No.208-SL)
from
$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Yukon Gear – 8.8" Ford Cover Gasket (Part No.23011)
Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)
from
$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
- 3/4″ x 16 thread
Yukon Gear – Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33297)
from
$8.99
Pinion gear thrust washer (0.750″ shaft) for 8.8″ Ford.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Ford 8.8″
- 0.750″ I.D.
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Felpro – Differential Cover Gasket (Part No.RDS 55460)
from
$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Yoke For Ford 8.8" Truck U/Joint Size (5" Od) (Part No.41050)
from
$184.99
Yukon yoke for Ford 8.8″ truck U/joint size (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- 30 spline
- Round companion flange
- 5.00″ O.D.
Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)
from
$129.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- Includes carrier bearings and races and “super” carrier shim kit
Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)
from
$165.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 2009 and down Ford 8.8″
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)
from
$58.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
See More
Dorman – Spindle Nut (Part No.K1002754967DOR)
from
$36.42
Spindle Nut
Motive Gear – Differential Ring and Pinion (Part No.F8.8-373)
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.A-62)
from
$145.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Spindle Nut – Deformed Thread M20-1.50 Hex 30mm (sold by each) (Part No.615-220)
from
$19.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
USA Standard Gear – Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline (Part No.39032)
from
$297.99
Product Features:
See More
- Spider gear kit
- Fits Ford 8.8″ 31 spline Trac Loc positraction
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Yukon Gear – Yoke For Model 35 With A 1310 U/Joint Size (Part No.41098)
from
$115.99
Yukon yoke for Model 35 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits AMC Model 35
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)
from
$16.99
Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.
Product Features:
See More
Product Features:
- Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
- Fits standard open differentials only
- 0.750″ diameter
USA Standard Gear – 8.8" Ford Spartan Locker Cross Pin, 31 Spline Only (Part No.17020)
from
$52.99
Product Features:
See More
- USA Standard Gear heavy-duty cross pin shaft
- Fits Ford 8.8″ with 7/8″ cross pin diameter
- Works with Spartan Locker or standard open spider gears
Popular 2003 Lincoln Aviator Drivetrains Categories
2003 Lincoln Aviator Drivetrains
You count on your 2003 Lincoln Aviator to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 264 Drivetrains ranging in price from $0.99 to $1,681.99, you’re sure to find everything you need for your 2003 Lincoln Aviator.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 23 different brands like Moog, DriveWorks, and National. 2003 Lincoln Aviator Drivetrains start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 704 extensive product reviews on 2003 Lincoln Aviator Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 3.9 stars and Universal Joint Strap Kit with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2003 Lincoln Aviator below to get started!
Top-Rated Drivetrains Brands For Your 2003 Lincoln Aviator
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Lincoln Aviator running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, National, and even more.
Popular Idemitsu Drivetrains
You’ll find popular Idemitsu brand products across Differentials. All are waiting to get your 2003 Lincoln Aviator back on the road. Some of the top-rated Idemitsu products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 2003 Lincoln Aviator, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 2003 Lincoln Aviator Drivetrains
What are the most purchased Drivetrains for the 2003 Lincoln Aviator?
Out of 264 Drivetrains for the 2003 Lincoln Aviator, the most popular in our inventory are:
What are the top-rated 2003 Lincoln Aviator Drivetrains?
Top-rated Drivetrains for your 2003 Lincoln Aviator based on customer reviews/ratings are:
