from

$671.99

Failed air suspension too costly to repair? This partial air-to-coil spring conversion kit replaces failed rear air springs with conventional steel springs. Cost-effectively restore a smooth ride by only replacing the parts necessary.

Product Features:

Alternative replacement – this air suspension delete kit replaces the original rear air springs with conventional coil springs
Cost-saving solution – ideal for older vehicles on which maintaining the original air suspension isn’t necessary or too costly
Thoroughly tested – parts underwent ride handling testing to ensure performance
Tech note – includes all necessary hardware and components needed to convert rear suspension; full 4-corner kit required to eliminate warning light

from

$18.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made of Superior Hyper-Flex+ Material
Lasts from 3 to 10 Times Longer
Assemble to Chassis Same Way as OEM
Maintains Factory Ride Characteristics
Simple Way to Increase Vehicle Height

from

$309.99

The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

Product Features:

Maximize Axle Travel
Smooth Axle Engagement And Disengagement
Enhance Suspension Performance
ProgressiveáSpring Rate
Absorbs Energy And Cushions Road Shocks
Stronger Than OEM Bumpstops
Easy Installation

from

$306.99

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$45.99

Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.

Product Features:

Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$54.34

Strut Mounting Kit

from

$289.05

ARNOTT PART # SK-2812 PRODUCT WEIGHT: 6 lbs ORIGINAL EQUIPMENT # 4851060121, 4851069415, 4851069195 Arnott’s new aftermarket front shock replacement for the Lexus GX 470, SK-2812, delivers the outstanding control, stability and comfort that Lexus owners demand. Arnott’s exclusive shock design fits both the Left or Right sides of the vehicle. The shock replaces the often problematic, and expensive to repair, OE auto-dampening shock while turning off any dashboard suspension warning lights. Now you can replace your worn-out or locked up Lexus shock for a fraction of the dealership’s price!

Product Features:

New Custom Valved Shock Absorber
Welded Lower Steel Spring Seat
Detailed Installation Manual
New Upper Mounting Hardware and Dustcover
Designed and Assembled in the USA

from

$219.99

Quick Strut Kit

from

$114.99

ShkAbsrbrAssyKt

from

$29.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$1247.99

This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications
Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$26.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$209.99

This air suspension spring is designed to match the fit and function of the original spring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension spring is designed to match the fit and function of the original spring on specified vehicle
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.

Product Features:

Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt
Durable construction – made of hardened steel to match the function and durability of the original part
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life

from

$357.43

ARNOTT PART # SK-2813 PRODUCT WEIGHT: 7 lbs ORIGINAL EQUIPMENT # 4853069485, 4853069185, 4853069205, 4853060071 Arnott’s new rear aftermarket shock replacement for the Lexus GX470 delivers control, stability, handling, and comfort. Arnott’s new exclusive Lexus GX470 rear shock design works with the Lexus auto-leveling system with no modifications. Arnott’s passive shock does away with the expensive auto-dampening shock, preventing you from being sent to the Lexus dealer with a high repair bill. Now you can replace your worn-out or locked up Lexus shock for a fraction of the dealership’s price! Arnott’s shock will work with the Arnott Rear Air Spring(s) A-2466, the OEM Lexus air suspension, or Arnott’s exclusive coil spring kit C-2410.

Product Features:

New Custom Valved Shock Absorber
Welded Lower Steel Spring Seat
Detailed Installation Manual
New Upper Mounting Hardware and Dustcover
Designed and Assembled in the USA

from

$319.78

Suspension Ride Heig

from

$114.99

Quick Strut

from

$109.99

SuspAirBag/Bellows

from

$109.99

SuspAirBag/Bellows

from

$844.99

SuspAirBag/Bellows

from

$20.79

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Long-lasting performance
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features
Wrench flats at base of stud allow for positive hold and use of sockets for quick and easy installation and removal

from

$63.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$49.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$89.55

Control Arm

from

$44.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$89.06

Control Arm

from

$71.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Engineered to match or exceed OE requirements
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose