2003 Lexus GX470 Drivetrains
More 2003 Lexus GX470 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2003 Lexus GX470, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2003 Lexus GX470 Drivetrains
EMPI – RE CV Joint Boot Kit (Part No.K6010411865EMP)
from
$31.54
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)
from
$123.99
Product Features:
See More
- Fits Toyota V6 rear
- Conversion yoke for 29 spline gears
- 29 spline pinion
Yukon Gear – Standard Open Carrier Case, Toyota V6 (Part No.20110)
from
$794.99
V6 standard Open case, bare.
Product Features:
See More
Product Features:
- Standard open carrier case
- Does not include spider gears
- Fits Toyota V6
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Bearing Race Driver (Part No.56004)
from
$99.99
Bearing race driver for Toyota front V6, Landcruiser reverse rotation, and Tacoma with locker (TOY30025). No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30025 race
- All steel construction
Yukon Gear – V6 Standard Open Pinion Gear Thrust Washer (Part No.33393)
from
$10.99
V6 standard Open pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Toyota V6
Yukon Gear – Oil Baffle (Part No.33007)
from
$7.99
Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.
Product Features:
See More
Product Features:
- Oil baffle
- Fits Toyota Landcruiser reverse rotation front
Dorman – Generation 1 Wheel Hub (Part No.K7000402687DOR)
from
$65.44
Wheel Hubs are an integral component of the wheel assembly, crucial to establishing the handling characteristics of your vehicle. That’s why Dorman’s industry-leading evaluation process ensures that our hubs are designed for long-lasting reliability and performance. Plus, Dorman’s vehicle try-on testing ensures a proper fit, every time.
Product Features:
See More
Product Features:
- Comes with axle nut (where applicable)
- Sturdy steel construction
- Bearings press onto the hubs for ease of installation
- Quality inspection includes dimensional checks, materials testing, and hardness testing
USA Standard Gear – Master Overhaul Kit For Toyota Tacoma And 4-Runner With Factory Electric Locker (Part No.37112)
from
$612.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Toyota Tacoma and T100 rear with factory locking differential
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and silicone.
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.30025)
from
$89.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Ring Gear Bolt (Part No.33060)
from
$6.99
Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.
Product Features:
See More
Product Features:
- Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
- 11mm x 1.0
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Yukon Gear – V6 & L/C Reverse Drop Out Side Adjusters (Part No.33365)
from
$38.99
Product Features:
See More
- Side adjuster
- Fits Toyota V6 and Landcruiser reverse rotation front
National – Multi Purpose Seal (Part No.710734)
from
$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
USA Standard Gear – Spartan Locker For Toyota V6 With 30 Spline Axles (Part No.17034)
from
$549.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Toyota 8″ and V6
- Made from 9310 steel for added strength
- Works with stock side gears in standard carrier case
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170)
from
$147.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-5016)
from
$531.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
National – Multi Purpose Seal (Part No.710254)
from
$2.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.225875)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – 7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip (Part No.33373)
Yukon Gear – Outer Oil Slinger (Part No.33025)
from
$10.99
Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.
Product Features:
See More
Product Features:
- Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser
Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)
from
$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.
Product Features:
See More
Product Features:
- Pinion depth shim kit for Toyota 7.5″, 8″ and V6
Yukon Gear – Rear Inner Axle Seal ’03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser (Part No.30335)
from
$57.99
Toyota rear inner axle seal, 03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser,Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner axle seal
- Fits 2003 and up Toyota T100 and Tacoma
NOK – Pinion Seal (Part No.J7010163834NOK)
from
$11.65
Pinion Seal
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Popular 2003 Lexus GX470 Drivetrains Categories
2003 Lexus GX470 Drivetrains
You count on your 2003 Lexus GX470 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 143 Drivetrains ranging in price from $2.99 to $1,356.99, you’re sure to find everything you need for your 2003 Lexus GX470.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 21 different brands like Valvoline, Carquest Premium, and Moog. 2003 Lexus GX470 Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 650 extensive product reviews on 2003 Lexus GX470 Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.3 stars and Multi Purpose Seal with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2003 Lexus GX470 below to get started!
Top-Rated Drivetrains Brands For Your 2003 Lexus GX470
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Lexus GX470 running right for years to come. In our inventory you’ll find brands like Valvoline, Carquest Premium, Moog, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2003 Lexus GX470 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2003 Lexus GX470 Drivetrains
What are the most purchased Drivetrains for the 2003 Lexus GX470?
Out of 143 Drivetrains for the 2003 Lexus GX470, the most popular in our inventory are:
What are the top-rated 2003 Lexus GX470 Drivetrains?
Top-rated Drivetrains for your 2003 Lexus GX470 based on customer reviews/ratings are:
from
$35.99
(4)
Greaseable Super Strength Universal Joint
“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”
