2003 Jeep Wrangler Exhaust System Kits

Give your Jeep Wrangler TJ’s exhaust system an upgrade with a DynoMax Super Turbo single 2.5-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.

Product Features:

• COMPATIBILITY — Designed for 2000-2006 Jeep Wrangler TJ; see product information for compatibility and engine specs
• COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipe and clamp
• EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
• EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
• IMPROVED FLOW CAPACITY — Aluminized steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
• PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications
• PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
• ENGINEERED TO LAST¿–¿Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
• ENGINEERED TO LAST┐–┐Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
• SPECS — Welded outlet single wall, buffed and polished stainless steel slant cut tip

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Fits both the slip-fit and flange-fit cats. Uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface eliminating leak paths. A straight through designed; free flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• Free-Flow Muffler
• Aggressive Sound

For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.R. (Single out rear) systems are the perfect choice. As a Force II system it produces a mild interior and exterior tone, and is suited to customers looking for efficiency improvements without too aggressive of a tone. Especially recommended daily drivers. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

The MagnaFlow 2000-2006 Jeep Wrangler Competition Series Cat-Back Performance Exhaust System 16390 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 2.4L, 2.5L, 4.0L 2000-2006 Jeep Wrangler with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 16390 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16390’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

The MagnaFlow 2000-2006 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 17122 brings additional off-roading prowess and our deep signature exhaust note to your 2.4L, 2.5L, 4.0L 2000-2006 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17122 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17122’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17122 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design