2003 Jeep Wrangler Drive Shafts and Axles

Essential 2003 Jeep Wrangler Drive Shafts and Axles

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$31.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-555)

Differential Pinion Yoke Assembly

from

$79.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.

Product Features:
  • Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
  • Effective fix – replacement restores proper connection between drive shaft and differential
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Omix – CV Axle (Part No.16523.18)

CV Axle

from

$602.99
Has your front axle shaft or U-joint failed? Omix-ADA offers complete front Jeep axle shaft assemblies providing everything you need for a simple installation. Slide the old parts out and slide the new parts in. You’ll be back on the road in no time.

Product Features:
  • Right Side
  • With ABS
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Spartan – Drive Axle Assembly; Jeep W 4WD Locker Axle (Part No.RAXP2149B)

Drive Axle Assembly; Jeep W 4WD Locker Axle

from

$1994.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Yukon Gear – Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear) (Part No.33268)

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside Axle Snap Ring (Next To Side Gear)

from

$4.99
Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:
  • Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
  • Intalls next to side gear
See More

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Omix – Axle Shaft Bearing Retainer Ring (Part No.16560.38)

Axle Shaft Bearing Retainer Ring

from

$14.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rear
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Axle Seal Retainer (Part No.16535.40)

Axle Seal Retainer

from

$39.99
Axle seal retainer, rear, 2007-2012 Wrangler with Dana 35 and Dana 44

Product Features:
  • Rear
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

National – Bearings (Part No.206-FF)

Bearings

from

$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Axle Shaft Seal (Part No.S-710202)

Axle Shaft Seal

from

$10.29
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable, OE Fix (Part No.936-090)

Rear Drive Shaft: Greaseable, Adjustable, OE Fix

from

$867.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly
  • Rear Drive Shaft: Greaseable, Adjustable, OE Fix
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-131)

Front Drive Shaft: Greaseable, Adjustable

from

$681.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$162.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More

Yukon Gear – 8.31" 27Spline 297X 95 & Up Wrangler Stub For Hub Conv – Only (Part No.21341)

8.31" 27Spline 297X 95 & Up Wrangler Stub For Hub Conv - Only

from

$408.99
Product Features:
  • 27 spline
  • 8.31″ long
  • Fits Dana Spicer 30 in 1995 and up Wrangler
  • Outer stub
  • 5-760X U-joint size
  • 4340 Chromoly
  • For WARN hub conversion only
See More

Yukon Gear – 4340 Chrome-Moly Outer Stub For Dana 30, ’95 And Newer Wranger, Uses 5-760X U/Joint (Part No.21361)

4340 Chrome-Moly Outer Stub For Dana 30, '95 And Newer Wranger, Uses 5-760X U/Joint

from

$225.99
Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H front axles come with a 10 year warranty against manufacturing defects. horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • Fits Jeep Wrangler and Cherokee front with Dana Spicer 30
  • 4340 Chromoly
  • Outer stub
  • 27 spline
  • 6.11″ from end of splines to center of u-joint bore
See More

Yukon Gear – Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5" (Part No.33180)

Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5"

from

$5.99
Model 35 & other screw-inaxle stud, 1/2″ -20 x 1.5″.

Product Features:
  • Screw in axle stud for AMC Model 35
  • 1/2″ x 20 thread
  • 1.5″ long
See More

Yukon Gear – Axle Stud, 1 15/16" Xx 1/2-20 (Part No.33426)

Axle Stud, 1 15/16" Xx 1/2-20

from

$10.99
Product Features:
  • Axle stud
  • 1/2″ x 20
  • 0.667″ knurl diameter
  • 1 15/16″ long
See More

Crown Auto Jeep Replacmnt – Red (Part No.83503504)

Red

from

$10.79
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

Crown Auto Jeep Replacmnt – Black, Front (Part No.5014852AB)

Black, Front

from

$9.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

National – Bearings (Part No.M88048)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.307-FFL5)

Bearings

from

$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$50.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Omix – Axle Shaft Bearing/Cup Kit (Part No.16536.05)

Axle Shaft Bearing/Cup Kit

from

$76.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rear
  • With Retainer
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Yukon Gear – Bolt-In Axle Bearing And Seal Set, Set 9, Timken Brand, For Model 35 & 8.2" Buick, Oldsmobile, P (Part No.10043)

Bolt-In Axle Bearing And Seal Set, Set 9, Timken Brand, For Model 35 & 8.2" Buick, Oldsmobile, P

from

$118.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Bolt-in axle bearing and seal set, Set 9, Timken Brand, for Model 35 & 8.2″ Buick, Oldsmobile, Pontiac. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for AMC Model 35 with bolt-in axles and 8.2″ in Buick, Oldsmobile and Pontiac
  • Includes axle bearing and seal
  • Tapered roller design
  • Services one side
See More

Yukon Gear – Dana 44JK Rear Axle Bearing And Seal Kit Replacement (Part No.10063)

Dana 44JK Rear Axle Bearing And Seal Kit Replacement

from

$135.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Dana Spicer 44 JK rear
  • Includes axle bearing and seal
  • Services one side
See More

2003 Jeep Wrangler Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2003 Jeep Wrangler. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 78 different Drive Shafts and Axles in our inventory ranging from $1.99 to $1,994.99. That means you can find the exact parts or products you need to keep that 2003 Jeep Wrangler running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 2003 Jeep Wrangler. Spicer, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2003 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 161 reviews in this category, some of the top rated parts include Bearings with 2.3 stars and Shaft Repair Sleeve with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2003 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2003 Jeep Wrangler Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 2003 Jeep Wrangler, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $35.99
(2)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints

FAQs for 2003 Jeep Wrangler Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2003 Jeep Wrangler?

Out of 78 Drive Shafts and Axles for the 2003 Jeep Wrangler, the most popular in our inventory are:
Multi Purpose Seal
from $17.49
(4)
Multi Purpose Seal
Axle Shaft Seals
Multi Purpose Seal
from $10.49
(2)
Multi Purpose Seal
Axle Shaft Seals
R1563Tav Rear Axle Bearing And Seal Kit
from $42.99
This product is not rated
R1563Tav Rear Axle Bearing And Seal Kit
Axle Shaft Bearing Assemblies

What are the top-rated 2003 Jeep Wrangler Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 2003 Jeep Wrangler based on customer reviews/ratings are:
Bearings
from $17.49
(3)
Bearings
“This bearing was a perfect fit for use with the intermediate drive shaft on a 2009 Chev. Malibu with 2.4L engine and 6-spd. auto trans. (LE5 with MH8)”
Shaft Repair Sleeve
from $39.99
(1)
Shaft Repair Sleeve
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”