2003 Jaguar S-Type Steering and Chassis Parts
More 2003 Jaguar S-Type Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2003 Jaguar S-Type, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2003 Jaguar S-Type Steering and Chassis Parts
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$26.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Rein – Power Steering Rack Boot Kit (Part No.BKK0141)
from
$10.29
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
APA/URO Parts – P S Return Hose (Part No.M2016118351APA)
from
$55.74
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering.
Product Features:
See More
Product Features:
- Manufactured as a direct OE replacement
- Pressure tested to maintain a consistent flow
- Backed by the manufactures warranty against workmanship and material defects
Maval – Complete Steering Rack, Remanufactured (Part No.M1000340460MAV)
from
$756.90
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.
Product Features:
See More
Product Features:
- OE quality and direct fit replacement
- Remanufacture based on highest quality standards
- Computerized tests insure that all products meet the OE performance specification.
- Performance and quality approvals from OE steering gear and pump manufacturers world wide
APA/URO Parts – P/S Reservoir (Part No.M2030381369APA)
from
$108.19
P/S Reservoir
MOOG – Ball Joint (Part No.K500084)
from
$84.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Lemfoerder – Toe Adjustment Link (Part No.L2066945362LEM)
from
$133.47
The Lemfoerder toe adjustment link is manufactured and designed to meet the OE specifications for quality, fit and performance.
Product Features:
See More
Product Features:
- OE Direct replacement
- Bushings included for a complete installation
- Corrosion-resistant for long-lasting performance
Cardone – Power Steering Pump (Part No.21-5198)
from
$144.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Power Steering Pump (Part No.20-294)
from
$98.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Beck/Arnley – Tie Rod End (Part No.101-6911)
from
$34.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Ball joint is pre-greased
- Easy access wrench flat allows for the use of a socket for easy installation and removal
- Full ball stud
MOOG – Tie Rod End (Part No.ES800415)
from
$94.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Beck/Arnley – Ball Joint (Part No.101-7137)
from
$91.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Necessary hardware supplied as needed for a complete installation
- Hardware functionality matches original design requirements
- Application specific for this vehicle
MOOG – Ball Joint (Part No.K500085)
from
$145.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Stabilizer Bar Link (Part No.K750340)
from
$49.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Stabilizer Bar Link (Part No.K750260)
from
$45.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Febi – Sway Bar Bushing (Part No.L1050741000FEB)
from
$15.03
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
MOOG – Stabilizer Bar Bushing Kit (Part No.K201807)
from
$10.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Control Arm Front Right Upper (Part No.521-430)
from
$159.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Driveworks’ Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.521-429)
from
$188.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Lateral Link (Part No.526-597)
from
$69.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Alignment Caster / Camber Kit (Part No.K80061)
from
$44.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Popular 2003 Jaguar S-Type Steering and Chassis Parts Categories
2003 Jaguar S-Type Steering and Chassis Parts
You count on your 2003 Jaguar S-Type to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 38 Steering and Chassis Parts ranging in price from $10.29 to $491.13, you’re sure to find everything you need for your 2003 Jaguar S-Type.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Cardone, Moog, and Febi. 2003 Jaguar S-Type Steering and Chassis Parts start as low as $10.29!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 189 extensive product reviews on 2003 Jaguar S-Type Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2003 Jaguar S-Type below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2003 Jaguar S-Type
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Jaguar S-Type running right for years to come. In our inventory you’ll find brands like Cardone, Moog, Febi, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Sway Bars. All are waiting to get your 2003 Jaguar S-Type back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 2003 Jaguar S-Type, and some of our most reviewed Cardone parts include:
FAQs for 2003 Jaguar S-Type Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2003 Jaguar S-Type?
Out of 38 Steering and Chassis Parts for the 2003 Jaguar S-Type, the most popular in our inventory are:
from
$26.49
This product is not rated
Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles
Power Steering Filters
