2003 Hyundai Accent Steering and Chassis Parts

Essential Steering and Chassis Parts for 2003 Hyundai Accents

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

MANDO – OE Power Steering Pump (Part No.20A1017)

OE Power Steering Pump

from

$173.99
When a Power Steering (PS) Pump goes bad or fails, a driver most evidently will experience an abnormal whining/grinding noise occurring while turning the wheel and will eventually feel loss of steering response & assist. The PS pump is an essential component, as its responsibility is to send hydraulic fluid to the power steering rack and pinion. HL Mando OE power steering pumps are just like the one from the factory. Our pumps come complete with pulley and ready to install. Don’t risk using just any aftermarket PS pump, get the job done right with the original – We Are OE!

Product Features:
  • Direct Original Equipment Replacement
  • Tested for Quality, Durability, and Reliability
  • Manufactured in Korea
See More

Carquest Premium – Power Steering Return Hose, 3/8" Beaded Tube x 3/8" I.D. Hose (Part No.37948)

Power Steering Return Hose, 3/8" Beaded Tube x 3/8" I.D. Hose

from

$76.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90473)

Camber Bolt Kit

from

$17.99
Camber Bolt Kit

Rare Parts – Rack & Pinion Bellows (Part No.RP17819)

Rack & Pinion Bellows

from

$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.24-2662)

Remanufactured Rack and Pinion Assembly

from

$294.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone New – New Power Steering Reservoir (Part No.3R-304)

New Power Steering Reservoir

from

$53.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance.
  • Designed to match O.E. fit, function and performance.
  • Manufactured from O.E. grade material for strength and durability.
  • Resistant to cracking caused by the high temperatures in the engine compartment.
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

Driveworks – Steering Tie Rod End (Part No.DW-ES3377)

Steering Tie Rod End

from

$31.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Dorman – Left Steering Knuckle (Part No.698-251)

Left Steering Knuckle

from

$319.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Driveworks – Sway Bar Link Kit (Part No.DW-K80858)

Sway Bar Link Kit

from

$34.99
Sway Bar Link Kit

Carquest Premium – Power Steering Pressure Tube, 14mm Male Inv. Flare x 14mm Male "O" Ring (Part No.37315)

Power Steering Pressure Tube, 14mm Male Inv. Flare x 14mm Male "O" Ring

from

$38.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

MOOG – Camber Adjusting Kit (Part No.K9757)

Camber Adjusting Kit

from

$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Dorman – Suspension Control Arm (Part No.524-445)

Suspension Control Arm

from

$127.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP11714)

Conrol Arm W/Bj

from

$133.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Powercraft – Pump Seal Kit (Part No.8843)

Pump Seal Kit

from

$46.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8886)

Rack Pinion Seal Kit

from

$78.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Tie Rod End (Part No.RP29285)

Tie Rod End

from

$95.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

MOOG – Tie Rod End (Part No.ES801131)

Tie Rod End

from

$82.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MANDO – Steering Tie Rod End (Part No.15N0081)

Steering Tie Rod End

from

$19.99
Tie Rod Ends are critical suspension components linking the power steering rack to the wheel housing, designed to create stability in proper control and steering. Normal mileage over time and/or even damage (resulting from external impact) may cause the tie rod end bushings to experience excessive play. Excessive tie rod end play may eventually lead to alignment issues causing steering & abnormal tire damage – cupping or rapid tread wear may cause unwanted vibration issues that may affect proper steering ability or create other issues. HL HL Mando tie rod ends are high-quality aftermarket replacements specifically designed for Hyundai KIA, and Genesis vehicles, ensuring reliable performance and durability. Trust in HL Mando for your aftermarket needs!

Product Features:
  • Original Equipment Steering Rack & Pinion
  • 100% Direct Replacement. Ready to Install
  • Manufactured in Korea
See More

Driveworks – Camber Bolt Kit (Part No.DW-K9757)

Camber Bolt Kit

from

$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Carquest Premium – Ball Joint (Part No.410-234721)

Ball Joint

from

$35.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

First Equipment Quality – Ball Joint (Part No.L2020145205FEQ)

Ball Joint

from

$18.73
Every FEQ ball joint is engineered to restore the handling of your vehicle to original equipment condition. With global manufacturing facilities being ISO 9001, ISO TS/16949 and ISO 14001 Certified, the processes and quality are maintained to the highest standards providing superior products.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Rare Parts – Ball Joint (Part No.RP11391)

Ball Joint

from

$48.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

MOOG – Ball Joint (Part No.K90691)

Ball Joint

from

$24.79
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Delphi – Ball Joint (Part No.L20201231119DEL)

Ball Joint

from

$19.91
Ball Joint

Upgrade your 2003 Hyundai Accent with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2003 Hyundai Accent, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hyundai or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Accent functioning at its best. At Advance Auto Parts, we offer a wide selection of 67 Steering and Chassis Parts for the 2003 Hyundai Accent, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2003 Hyundai Accent at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $6.99 to $501.99, with an average price of $82.22. Our 67 Steering and Chassis Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 2003 Hyundai Accent without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Hyundai Accent, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Cardone, Driveworks, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Cardone and Driveworks also bring quality to the table, with Steering and Chassis Parts available starting at $13.79, and at an average 4 stars rating. With 610 customer reviews and counting, our 2003 Hyundai Accent Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2003 Hyundai Accent is always ready to roll. We’re committed to providing you with everything you need to keep your Accent in top shape, all in one place. Start shopping confidently below for your 2003 Hyundai Accent!

Best-Selling Power Steering Parts for 2003 Hyundai Accents

Enhance the driving experience in your Hyundai with 33 quality Power Steering Part components, starting at $6.99.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo (Part No.37468)

Power Steering Pressure Hose Assembly, 14mm Male "O" Ring x 16mm Banjo

from

$126.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Powercraft – Pump Seal Kit (Part No.8843)

Pump Seal Kit

from

$46.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5963)

Remanufactured Power Steering Pump

from

$186.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

MANDO – OE Power Steering Pump (Part No.20A1017)

OE Power Steering Pump

from

$173.99
When a Power Steering (PS) Pump goes bad or fails, a driver most evidently will experience an abnormal whining/grinding noise occurring while turning the wheel and will eventually feel loss of steering response & assist. The PS pump is an essential component, as its responsibility is to send hydraulic fluid to the power steering rack and pinion. HL Mando OE power steering pumps are just like the one from the factory. Our pumps come complete with pulley and ready to install. Don’t risk using just any aftermarket PS pump, get the job done right with the original – We Are OE!

Product Features:
  • Direct Original Equipment Replacement
  • Tested for Quality, Durability, and Reliability
  • Manufactured in Korea
See More

Carquest Premium – 3/8" Beaded Tube x 3/8" Beaded Tube (Part No.38109)

3/8" Beaded Tube x 3/8" Beaded Tube

from

$64.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Male Inv. Flare x 14mm Male "O" Ring (Part No.37314)

Power Steering Pressure Hose Assembly, 14mm Male Inv. Flare x 14mm Male "O" Ring

from

$76.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K9882)

Rack & Pinion Bellows Kit

from

$39.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3387N)

NEW RACK & PINION

from

$501.99
NEW RACK & PINION

Cardone – Steering Rack (Part No.M1000899300CAR)

Steering Rack

from

$383.43
Steering Rack

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2020)

Remanufactured Rack and Pinion Assembly

from

$297.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Atlantic Automotive Eng – NEW P/S PUMP (Part No.5343N)

NEW P/S PUMP

from

$218.99
NEW P/S PUMP

Autopart International Inc – P/S Pressure Hose (Part No.M20152049832API)

P/S Pressure Hose

from

$165.78
P/S Pressure Hose

Powercraft – Rack Pinion Seal Kit (Part No.8886)

Rack Pinion Seal Kit

from

$78.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Power Steering Return Hose, 3/8" Beaded Tube x 3/8" I.D. Hose (Part No.37948)

Power Steering Return Hose, 3/8" Beaded Tube x 3/8" I.D. Hose

from

$76.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Carquest Premium – Pressure Hose Assembly, 14mm Female Inv. Flare x 16mm Banjo (Part No.39869)

Pressure Hose Assembly, 14mm Female Inv. Flare x 16mm Banjo

from

$64.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone New – New Power Steering Reservoir (Part No.3R-322)

New Power Steering Reservoir

from

$51.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance.
  • Designed to match O.E. fit, function and performance.
  • Manufactured from O.E. grade material for strength and durability.
  • Resistant to cracking caused by the high temperatures in the engine compartment.
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

Rare Parts – Rack & Pinion Bellows (Part No.RP17819)

Rack & Pinion Bellows

from

$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Atlantic Automotive Eng – P/S FLUID RESERVOIR (Part No.RES-0073)

P/S FLUID RESERVOIR

from

$35.99
P/S FLUID RESERVOIR

Carquest Premium – Power Steering Return Tube Assembly, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.40585)

Power Steering Return Tube Assembly, 16mm Male "O" Ring x 3/8" Beaded Tube

from

$35.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

BBB Industries – Power Steering Filter (Part No.991-FLT4)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – Power Steering Filter (Part No.991-FLT2)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

POWER STEERINGFILTER

from

$28.99
POWER STEERINGFILTER

Dorman – RACK BELLOW (Part No.541-543)

RACK BELLOW

from

$25.99
RACK BELLOW

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

Most Popular 2003 Hyundai Accent Tie Rods

Customize your Hyundai with 5 Tie Rods products like Tie Rod Ends and Center Tie Rod Ends, all priced under $46.99.

MOOG – Tie Rod End (Part No.ES3377)

Tie Rod End

from

$46.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

CTR – CTR Tie Rod End (Part No.M3010233854CTR)

CTR Tie Rod End

from

$33.33
CTR is an O.E.M. suspension parts manufacturer for Korean vehicles and a leading supplier for Japanese, American, and European vehicles in the worldwide aftermarket. CTR uses an advances triple heat treat process for the body and ball stud to extend longer life and enhance stable performance. CTR manufactures the ball joint using the latest OE polymer encapsulation technology.

Product Features:
  • Lower preload at assembly, less friction
  • No lubrication required in service
  • Less service wear
  • Longer service life
See More

Driveworks – Steering Tie Rod End (Part No.DW-ES3377)

Steering Tie Rod End

from

$31.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Sankei 555 – Tie Rod End (Part No.M3010298714SNK)

Tie Rod End

from

$26.83
Tie Rod End

MANDO – Steering Tie Rod End (Part No.15N1045)

Steering Tie Rod End

from

$14.99
Tie Rod Ends are critical suspension components linking the power steering rack to the wheel housing, designed to create stability in proper control and steering. Normal mileage over time and/or even damage (resulting from external impact) may cause the tie rod end bushings to experience excessive play. Excessive tie rod end play may eventually lead to alignment issues causing steering & abnormal tire damage – cupping or rapid tread wear may cause unwanted vibration issues that may affect proper steering ability or create other issues. HL HL Mando tie rod ends are high-quality aftermarket replacements specifically designed for Hyundai KIA, and Genesis vehicles, ensuring reliable performance and durability. Trust in HL Mando for your aftermarket needs!

Product Features:
  • Original Equipment Steering Rack & Pinion
  • 100% Direct Replacement. Ready to Install
  • Manufactured in Korea
See More

Top Picks for 2003 Hyundai Accent Ball Joints

Upgrade Hyundai Accents with top-quality Ball Joints parts, including 11 OEM and aftermarket selections for your 2003 model.

MOOG – Ball Joint (Part No.K90691)

Ball Joint

from

$24.79
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620109)

Control Arm and Ball Joint Assembly

from

$112.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620106)

Control Arm and Ball Joint Assembly

from

$107.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

CTR – Ball Joint (Part No.L2020106223CTR)

Ball Joint

from

$28.77
Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP11713)

Conrol Arm W/Bj

from

$133.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP11714)

Conrol Arm W/Bj

from

$133.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Dorman – Control Arm (Part No.520-863)

Control Arm

from

$118.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Control Arm (Part No.520-864)

Control Arm

from

$104.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

TRW – Ball Joint (Part No.L2020143622TRW)

Ball Joint

from

$47.00
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

Beck/Arnley – Ball Joint Front Lower (Part No.101-4978)

Ball Joint Front Lower

from

$25.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Necessary hardware supplied as needed for a complete installation
  • Hardware functionality matches original design requirements
  • Application specific for this vehicle
See More

First Equipment Quality – Ball Joint (Part No.L2020145205FEQ)

Ball Joint

from

$18.73
Every FEQ ball joint is engineered to restore the handling of your vehicle to original equipment condition. With global manufacturing facilities being ISO 9001, ISO TS/16949 and ISO 14001 Certified, the processes and quality are maintained to the highest standards providing superior products.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

In-Demand Alignment Hardware for 2003 Hyundai Accents

Select from 2 premium Alignment Hardware parts for your 2003 Hyundai Accent, with prices ranging from $24.99 to $434.99.

Driveworks – Camber Bolt Kit (Part No.DW-K9757)

Camber Bolt Kit

from

$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

Most Sold 2003 Hyundai Accent Sway Bars

Explore our best-selling Hyundai parts for the 2003 Accent among 11 OEM and aftermarket options starting from $10.06.

CTR – Sway Bar Link (Part No.L1030317949CTR)

Sway Bar Link

from

$27.97
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Driveworks – Sway Bar Link Kit (Part No.DW-K80618)

Sway Bar Link Kit

from

$13.79
Sway Bar Link Kit

TRW – Stabilizer Link (Part No.L1030317953TRW)

Stabilizer Link

from

$38.41
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:
  • Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
  • Provides improved fuel economy, lower emissions and excellent driving comfort
  • Reduce weight and damping vibrations
  • Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
See More

Beck/Arnley – Stabilizer End Link (Part No.101-4863)

Stabilizer End Link

from

$30.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

Beck/Arnley – Stabilizer End Link (Part No.101-4862)

Stabilizer End Link

from

$30.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

Meyle – Sway Bar Link (Part No.L1030143604MEY)

Sway Bar Link

from

$30.03
The Meyle Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

CTR – Sway Bar Link (Part No.L1030317953CTR)

Sway Bar Link

from

$28.38
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MOOG – Suspension Stabilizer Bar Link (Part No.K80616)

Suspension Stabilizer Bar Link

from

$26.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Improves upon OE designs
See More

Beck/Arnley – Stabilizer End Link (Part No.101-5259)

Stabilizer End Link

from

$26.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

Sankei 555 – Sway Bar Link (Part No.L1030143604SNK)

Sway Bar Link

from

$13.74
Sway Bar Link

First Equipment Quality – Sway Bar Link (Part No.L1030143604FEQ)

Sway Bar Link

from

$10.06
The FEQ Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Top-Rated Steering and Chassis Parts Brands For Your 2003 Hyundai Accent

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2003 Hyundai Accents. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Cardone, and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 2003 Accent start at just $11.49 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2003 Hyundai Accent Steering and Chassis Parts

When it comes to maintaining or upgrading your 2003 Hyundai Accent, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2003 Hyundai Accent. With over 4 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.32. Plus, with over 208 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Power Steering Oil Cooler
from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

Transmission Oil Cooler Hose
from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Mounting Kit System
from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Popular Cardone 2003 Hyundai Accent Steering and Chassis Parts

Cardone auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2003 Hyundai Accent owner should feel confident when installing genuine Cardone parts in their vehicle. To ensure the best fit and performance for your 2003 Accent, Advance Auto Parts carries a full inventory of 8 Cardone Steering and Chassis Parts. Plus you will be keeping your Hyundai in peak condition while saving money because prices on these Cardone Steering and Chassis Parts range from $31.99 to $383.43, plus, with more than 65 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Power Steering Filter
from
$31.99
This product is not rated

Power Steering Filter

“”

Remanufactured Rack and Pinion Assembly
from
$297.99
This product is not rated

Remanufactured Rack and Pinion Assembly

“”

Steering Rack
from
$383.43
This product is not rated

Steering Rack

“”

FAQs for 2003 Hyundai Accent Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2003 Hyundai Accents?

Out of 67 Steering and Chassis Parts that fit 2003 Hyundai Accents, the following parts are the top sellers:

What’s the price range for 2003 Hyundai Accent Steering and Chassis Parts?

Steering and Chassis Part prices for the 2003 Hyundai Accent start at $6.99 and go up to $501.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2003 Hyundai Accent?

The average price for Steering and Chassis Parts for the 2003 Hyundai Accent is $82.22. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Hyundai Accent model years?

Yes, we currently carry Steering and Chassis Parts for 27 model years of Hyundai Accents between 1995 and 2022. Steering and Chassis Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Steering and Chassis Parts for my 2003 Hyundai Accent?

The cheapest 2003 Hyundai Accent Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 2003 Hyundai Accent?

Out of 610 reviews by customers, our 2003 Hyundai Accent Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2003 Hyundai Accent and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 2003 Hyundai Accent?

Can I get help with 2003 Hyundai Accent Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hyundai Steering and Chassis Parts and more.

What is your return policy for Hyundai Accent Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Hyundai Accent Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.