2003 GMC Savana 3500 Drivetrains
More 2003 GMC Savana 3500 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2003 GMC Savana 3500, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2003 GMC Savana 3500 Drivetrains
Driveworks – Drive Shaft Center Support (Part No.S-HB-108-D)
Yukon Gear – Set Up Bearing (Part No.56039)
from
$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 60
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down (Part No.20043)
from
$509.99
Product Features:
See More
- Trac Loc positraction carrier case
- Does not include spider gears
- Fits Dana Spicer 60
- 4.10 and down ratio only
- ABS and non-ABS compatible
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)
from
$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Eaton-Type 14 Plate Carbon Clutch Set For 9.5" GM And 9.75" Ford (Part No.16058)
from
$362.99
Eaton-type 14 plate Carbon clutch set for 9.5″ GM and 9.75″ Ford.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 9.5″ with Eaton positraction
- Carbon fiber clutches
Yukon Gear – Bearing Race Driver (Part No.56020)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M802011 race
- All steel construction
Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)
Yukon Gear – Pinion Install Kit For ’99 & Newer 10.5" GM 14 Bolt Truck Differential (Part No.13106)
from
$449.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 10.5″ 14 bolt truck
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)
from
$47.99
Plug adapter for extra-large clamshell. No Return.
Product Features:
See More
Product Features:
- Plug adapter for Extra Large clamshell
- Fits carrier bearing puller
Yukon Gear – Steel Cover For GM 10.5" 14 Bolt Truck (Part No.32345)
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
Dorman – Rear Axle Shaft – Right or Left Side (Part No.630-325)
from
$386.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.
Product Features:
See More
Product Features:
- Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
- Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
- Durable construction – designed to rigorous standards and tested to ensure performance
- Trustworthy solution – backed by team of engineers and quality control specialists in the United States
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
National – Taper Bearing Cone (Part No.LM501349)
from
$17.99
Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Motive Gear – Differential Pinion Shim Kit (Part No.1102)
USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)
from
$249.99
Product Features:
See More
- Spider gear kit
- Fit Dana Spicer 70 and 80 open differential with 35 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Minor Install Kit For ’89-’98 10.5" GM 14 Bolt Truck Differential (Part No.12046)
from
$115.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits 1989 and up GM 10.5″ 14 bolt truck
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Dorman – Differential Pinion Yoke Assembly (Part No.697-529)
from
$203.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Yukon Gear – Mini Spool For GM 10.5" 14 Bolt Truck (Part No.32301)
from
$287.99
Yukon mini spool for GM 10.5″ 14 bolt truck.
Product Features:
See More
Product Features:
- Fits 10.5″ GM 14 bolt truck
- Provides 100% traction to both wheels at all times
- Installs into standard open carrier case
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-102)
from
$1447.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Pro-King – Axle Seal (Part No.741B076A)
from
$17.99
Axle Seal
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Dorman – Spindle Nut 2 In.-16 Hex Size 2-5/8 In. (Part No.615-132.1)
from
$32.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)
from
$57.99
8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
Yukon Gear – Yoke For ’98 And Newer GM 9.5" With A 1350 U/Joint Size And Triple Lip Design (Part No.41070)
from
$407.99
Yukon yoke for ’98 and newer GM 9.5″ with a 1350 U/joint size and triple lip design. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1998 and up GM 9.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Pro-King – Differential Internal Nest Kit (Part No.744A717)
from
$323.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33100)
from
$12.99
10.5″ GM 14 bolt truck crush sleeve, 1989 & newer. Approx 0.920″ long.
Product Features:
See More
Product Features:
- Crush sleeve for 1989 and up GM 10.5″ 14 bolt truck
- 0.920″ tall
Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)
from
$7.99
14T side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 10.5″ 14 bolt truck
Popular 2003 GMC Savana 3500 Drivetrains Categories
2003 GMC Savana 3500 Drivetrains
You count on your 2003 GMC Savana 3500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 273 Drivetrains ranging in price from $2.49 to $1,110.00, you’re sure to find everything you need for your 2003 GMC Savana 3500.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Valvoline, Moog, and Spicer. 2003 GMC Savana 3500 Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,229 extensive product reviews on 2003 GMC Savana 3500 Drivetrains. Some of the top-rated Drivetrains products we carry are Ring and Pinion Bearing Installation Kit with 3.8 stars and Greaseable Premium Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2003 GMC Savana 3500 below to get started!
Top-Rated Drivetrains Brands For Your 2003 GMC Savana 3500
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 GMC Savana 3500 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Spicer, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2003 GMC Savana 3500 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2003 GMC Savana 3500 Drivetrains
What are the most purchased Drivetrains for the 2003 GMC Savana 3500?
Out of 273 Drivetrains for the 2003 GMC Savana 3500, the most popular in our inventory are:
What are the top-rated 2003 GMC Savana 3500 Drivetrains?
Top-rated Drivetrains for your 2003 GMC Savana 3500 based on customer reviews/ratings are:
