2003 Ford Mustang Intake Manifold Parts

Essential 2003 Ford Mustang Intake Manifold Parts

Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1015)

Coolant Temperature Sensor with Thread Sealant

from

$24.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1084)

Air Charge Temperature Sensor

from

$18.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1083)

Air Charge Temperature Sensor

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Vacuum Retainer Bushings (Part No.47099)

Vacuum Retainer Bushings

from

$9.99
This engine intake manifold vacuum retainer bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine intake manifold vacuum retainer bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Brass Cup Expansion Plug 25.73mm SC, Height 0.270 (sold by each) (Part No.565-018)

Brass Cup Expansion Plug 25.73mm SC, Height 0.270 (sold by each)

from

$1.99
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)

Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each)

from

$2.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (sold by each) (Part No.555-068)

Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (sold by each)

from

$1.39
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (Part No.362633.1)

Steel Cup Expansion Plug 1 In., SC, Height 0.250

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Part No.555-068.1)

Steel Cup Expansion Plug 1-41/64 In., Height 0.360

from

$2.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Holley – SysteMAX; Intake Manifold Gasket (Part No.108-80)

SysteMAX; Intake Manifold Gasket

from

$48.99
Kormetal gasket used between the SysteMax II Ford 5.0 liter upper and lower manifolds.

Product Features:
  • SysteMAX II Upper/Lower Manifold
See More

Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.72208)

Intake Manifold Gasket for 1963-1996 Small-Block Fords

from

$165.99
Available in different sizes for many different vehicle models/years. Clean positive seal. Embossed silicone bead surrounding the port. Matched to manifolds and cylinder heads. In the early days of the automotive performance industry, you either ran what

Product Features:
  • Clean positive seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
  • Fits 1963-96 289/302/351W Engines
  • 10-Pack Of Gaskets
See More

Sealed Power – Valley Pan Gasket Set (Part No.260-4009)

Valley Pan Gasket Set

from

$28.49
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98011 T-2)

Engine Intake Manifold Gasket Set

from

$121.99
Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5835)

Ultra Seal: Intake Gasket

from

$37.69
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Mr. Gasket – Intake Gasket (Part No.211)

Intake Gasket

from

$36.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.brbrFits all Ford 351C – 2V or 351 Cleveland 2-Barrel heads.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals
  • For OE replacement, high performance street, drag race and oval track use
See More

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Black Finish (Part No.21213)

Performer 289 Intake Manifold for Small-Block Ford, Black Finish

from

$442.99
Edelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.5 in. Front Height, 4.12 in. Center Height, 4.75 in. Rear Height
  • Black Powder Coated Finish
  • Made In The USA
See More

Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-175)

Plastic Intake Manifold - Includes Gaskets

from

$218.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:
  • Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction – tested to ensure top-quality OEM performance and durability.
  • Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
  • Trustworthy design – built by the industry leader in aftermarket manifolds
See More

Autotecnica – Intake Manifold (Part No.B12001892916ANA)

Intake Manifold

from

$345.41
Intake Manifold

Holley – Manifold; Ford II Lower (Part No.300-75S)

Manifold; Ford II Lower

from

$630.99
Utilizes late model alternator and A/C bracket mounting provisions. Has vacuum taps off Manifold runners. Uses cable bracket P/N 20-101 for GM 700R4 transmission. Extra installation hardware included.

Product Features:
  • Dual Plane Design
  • Front Height 3.5 in.
  • Rear Height 4.18 in.
See More

Edelbrock – RPM Dual-Quad manifold and carb Kit for 390-428 Big-Block Ford FE (Part No.2036)

RPM Dual-Quad manifold and carb Kit for 390-428 Big-Block Ford FE

from

$2024.99
The Edelbrock #2036 RPM Dual-Quad manifold and carb kit is designed for 390-428 Big-Block Ford FE applications. A huge hit among street rodders, this Dual-Quad Kits offer the ultimate set-up for anyone who wants the look and the performance of dual-quad c

Product Features:
  • Satin Finish
  • Dual-Quad Manifold
  • AVS2 Series 500 cfm Carb
  • RPM Air-Gap Manifold
  • Made In The USA
See More

Edelbrock – Performer RPM Ford FE 390 Intake Manifold (Part No.7105)

Performer RPM Ford FE 390 Intake Manifold

from

$701.99
Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
  • Edelbrock Total Power Package Maximizes Gains
See More

Dorman – Intake Manifold Runner Control (Part No.911-917)

Intake Manifold Runner Control

from

$279.99
This replacement intake manifold runner control motor matches the fit and function of the original equipment motor on specified vehicles. It’s designed with factory-style electrical connectors for a direct installation.

Product Features:
  • Ideal replacement – this intake manifold runner motor directly replaces the original motor on specified vehicle years, makes and models.
  • Durable construction – this part is made of quality materials and components for long-lasting, reliable service.
  • Cost-effective solution – offers original equipment quality at competitive price
  • Trustworthy quality – backed by team of engineers in the United States
See More

2003 Ford Mustang Intake Manifold Parts

Maybe you’re in the middle of a full rebuild of that 2003 Ford Mustang. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 15 different Intake Manifold Parts in our inventory ranging from $1.39 to $345.41. That means you can find the exact parts or products you need to keep that 2003 Ford Mustang running smoothly.

Intake Manifold Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2003 Ford Mustang. Dorman, FELPRO, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Intake Manifold Parts for your 2003 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Intake Manifold Parts to keep your 2003 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Intake Manifold Parts Brands To Make Your 2003 Ford Mustang Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.

FAQs for 2003 Ford Mustang Intake Manifold Parts

What are the most purchased Intake Manifold Parts for the 2003 Ford Mustang?

Out of 15 Intake Manifold Parts for the 2003 Ford Mustang, the most popular in our inventory are:
INTAKE MANIFOLD GASKET SET
from $51.99
This product is not rated
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets
INTAKE MANIFOLD GASKET SET
from $60.99
This product is not rated
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets
Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (sold by each)
from $1.39
This product is not rated
Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (sold by each)
Intake Manifold Expansion Plugs