2003 Ford Crown Victoria Alternators and Starters

Name: Alternator Connector
Brand: Carquest Premium
SKU: PTA1025
Price: 17.79 USD

Below you will find various in-demand Ford Alternators and Starters, components and accessories for your 2003 Crown Victoria. Advance Auto Parts has popular Crown Victoria parts like Alternator Parts, Alternator Pulley Parts, Ignition Lock Parts and more. You’ll also find aftermarket and OEM Alternators and Starters for other Crown Victoria model years including 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 and more. Select a category of 2003 Ford Crown Victoria Alternators and Starters below and start saving instantly.

Popular 2003 Ford Crown Victoria Alternators and Starters Categories

Alternators

Starters

Starter Solenoids

Ignition Lock Cylinders

Alternator Decoupler Pulleys

Alternator Pigtails

Voltage Regulator Connectors

Alternator Pulleys

Starter Drives

Essential Alternators and Starters for 2003 Ford Crown Victorias

from

$17.79

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$14.97

Alternator Pulley

from

$125.42

The Motorcraft Alternator Pulley is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

OES replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of OES
Manufactured to OES specification for fit, form, and function

from

$60.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better

from

$25.99

The Starter Relay is part of the starting system that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter Relay’s may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.

Product Features:

The Starter Relay is part of the starting system that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter Relay’s may also be used
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$50.99

from

$125.99

Litens Automotive is the inventor and patent holder of OAD decoupling alternator pulleys. This replacement pulley is offered as an upgrade to the original one-way clutch design for this police vehicle application . The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance, as well as, increasing vehicle gas mileage. Under normal driving conditions, the original pulley will require replacement in approx. 45,000 – 75,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$6.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$19.99

MOTOR – WINDOW

from

$55.99

from

$23.99

Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$75.99

Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$93.99

Motorcraft Original Equipment Products are manufactured of premium-quality materials to strict Ford Engineering standards. Motorcraft Parts are designed and engineered for each application. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

from

$94.53

If you’re looking to replace a Ford Ignition lock cylinder, Motorcraft is your best bet for fit and function.

Product Features:

Performance-tested
Help provide your customers with reliable performance and long-term durability
Never reverse-engineered, which helps ensure proper fit and easier installation

from

$185.99

Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.

from

$227.08

Motorcraft® starter motor assemblies are built to fit Ford and Lincoln vehicles and are available in new or remanufactured versions to help meet your customers’ needs.

Product Features:

Recommended for two- to eight-year-old vehicles
Meets Ford Motor Company engineering specifications for durability and reliability
Withstands 20,000 cranks or better than 18 years of 3-times-a-day starting

from

$238.67

Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.

Product Features:

Built to last using the highest quality materials and the most technologically advanced manufacturing processes
Remanufactured using more new parts than any other unit
100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
Solenoid with 100% new terminal hardware, contact face and high temperature cap, are completely disassembled and computer performance tested for pull/hold strength
100% new long life self-lubricating brushes
Gear train all new bushings
Drive with 100% new bushings, springs, rollers, washers caps and high temperature lubrication
Gear train lubricated with OE-specified grease providing protection from – 4 0 ?F to +3 02 ?F
Commutator remachined to Bosch tight tolerances
Permanent magnets/field coils tested for field strength and shorts (replaced with new as required)
Armature continuity tested, gauged, straightened and shimmed
All electrical connections resoldered
All shaft splines and load bearing surfaces lubricated with OE high temperature grade

from

$203.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Lifetime Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Each unit is triple-tested to ensure quality and performance
All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672

from

$52.99

from

$20.99

from

$175.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Each unit is triple-tested to ensure quality and performance
All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672

from

$247.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
100% new OE-quality brushes and bearings are used to ensure long service life
Rotors and stators are load tested and double insulated for maximum charging performance
Slip rings are precision polished for maximum brush contact and service life
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$181.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Each unit is triple-tested to ensure quality and performance
All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672

from

$394.57

DENSO alternators are not only original equipment on many of the world’s top production cars; they are a favorite in motorsports as well, where their light weight, high efficiency, and durability under the most gruelling conditions make them the natural choice. Remanufactured DENSO alternators go through a gruelling process: Stators and rectifiers are tested to 300 volts, while rotors are submitted to 600 volts, all to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-standard lubricants. New or remanufactured, a DENSO alternator is a quality component.

Product Features:

OE-Equivalent Direct Fit Application.
Remanufactured using only OE Components.
29 performance and safety checks.
Subjected to rigorous safety and performance tests.
Tested to OE standards and re-packed with OE-grade lubricant.
Provides exceptional reliability.

from

$291.99

Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
All new components are utilized to ensure long service life
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
Internal electronics are upgraded for heavy duty reliability (where applicable)
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Rotors and stators are load tested and double insulated for maximum charging performance

from

$469.21

Alternator

from

$279.99

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
All new components are utilized to ensure long service life
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
Internal electronics are upgraded for heavy duty reliability (where applicable)
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Rotors and stators are load tested and double insulated for maximum charging performance

from

$179.99

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
100% new OE-quality brushes and bearings are used to ensure long service life
Rotors and stators are load tested and double insulated for maximum charging performance
Slip rings are precision polished for maximum brush contact and service life
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Upgrade your 2003 Ford Crown Victoria with Top-Quality Alternators and Starters

When it comes to maintaining or upgrading your 2003 Ford Crown Victoria, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Alternators and Starters are key to keeping your Crown Victoria functioning at its best. At Advance Auto Parts, we offer a wide selection of 34 Alternators and Starters for the 2003 Ford Crown Victoria, designed to meet your needs without breaking the bank. From Alternator Part replacements to Alternator Pulley Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 2003 Ford Crown Victoria at great prices. Our Alternators and Starters inventory for this model ranges from just $14.97 to $306.99, with an average price of $160.67. Our 34 Alternators and Starters in stock come from 11 trusted brands, so you’re sure to find the right part for your 2003 Ford Crown Victoria without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Ford Crown Victoria, we stock popular OEM and aftermarket Alternators and Starters from top names like Carquest Professional Carquest Premium, and more. Carquest Professional Alternators and Starters start at just $179.99 and boast an impressive 5 stars average rating from customers. With 2,000 customer reviews and counting, our 2003 Ford Crown Victoria Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2003 Ford Crown Victoria is always ready to roll. We’re committed to providing you with everything you need to keep your Crown Victoria in top shape, all in one place. Start shopping confidently below for your 2003 Ford Crown Victoria!

Best-Selling Alternator Parts for 2003 Ford Crown Victorias

Enhance the driving experience in your Ford with 14 quality Alternator Part components, starting at $19.99.

show more show less

from

$247.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
100% new OE-quality brushes and bearings are used to ensure long service life
Rotors and stators are load tested and double insulated for maximum charging performance
Slip rings are precision polished for maximum brush contact and service life
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$233.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
100% new OE-quality brushes and bearings are used to ensure long service life
Rotors and stators are load tested and double insulated for maximum charging performance
Slip rings are precision polished for maximum brush contact and service life
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$279.99

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
All new components are utilized to ensure long service life
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
Internal electronics are upgraded for heavy duty reliability (where applicable)
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Rotors and stators are load tested and double insulated for maximum charging performance

from

$230.10

Built to last using the highest quality materials and the most technologically advanced manufacturing processes
Remanufactured using more new parts than any other unit
100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
Voltage regulator 100% tested for OE voltage specifications (new on GM and Ford)
Rectifier 100 % tested (new on Ford)
Diodes 100% tested (replaced with new as required)
Rotor 100% performance-tested for maximum electrical output
100% new long life sealed bearings with special high load, high temperature grease
Stator 100% insulation and phase balance tested
Slip rings 100% new or remachined to +/- .05mm, the tightest tolerance in the industry
100% new long life self-lubricating brushes
100% new clutch pulleys
All terminals, insulators and hardware provided

from

$306.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
100% new OE-quality brushes and bearings are used to ensure long service life
Rotors and stators are load tested and double insulated for maximum charging performance
Slip rings are precision polished for maximum brush contact and service life
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$298.99

WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.

from

$292.99

Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:

Full-load tested to guarantee compliance with Bosch’s strict performance specifications
100% factory tested, units are remanufactured (not rebuilt)
Built to last – uses high quality materials and the most technologically advanced developments.

from

$277.99

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
All new components are utilized to ensure long service life
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
Internal electronics are upgraded for heavy duty reliability (where applicable)
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Rotors and stators are load tested and double insulated for maximum charging performance

from

$240.86

Built to last using the highest quality materials and the most technologically advanced manufacturing processes
Remanufactured using more new parts than any other unit
100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
Voltage regulator 100% tested for OE voltage specifications (new on GM and Ford)
Rectifier 100 % tested (new on Ford)
Diodes 100% tested (replaced with new as required)
Rotor 100% performance-tested for maximum electrical output
100% new long life sealed bearings with special high load, high temperature grease
Stator 100% insulation and phase balance tested
Slip rings 100% new or remachined to +/- .05mm, the tightest tolerance in the industry
100% new long life self-lubricating brushes
100% new clutch pulleys
All terminals, insulators and hardware provided

from

$239.99

from

$230.17

Alternator

from

$226.80

Alternator

from

$41.47

Alternator Adapter P

from

$19.99

MOTOR – WINDOW

Most Popular 2003 Ford Crown Victoria Alternator Pulley Parts

Customize your Ford with 2 Alternator Pulley Parts products like Alternator Decoupler Pulleys and Alternator Pulleys, all priced under $125.99.

show more show less

from

$14.97

Alternator Pulley

from

$125.99

Top Picks for 2003 Ford Crown Victoria Ignition Lock Parts

Upgrade Ford Crown Victorias with top-quality Ignition Lock Parts parts, including 5 OEM and aftermarket selections for your 2003 model.

show more show less

from

$52.99

This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:

Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models.
Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$93.99

from

$75.99

Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$94.53

If you’re looking to replace a Ford Ignition lock cylinder, Motorcraft is your best bet for fit and function.

Product Features:

Performance-tested
Help provide your customers with reliable performance and long-term durability
Never reverse-engineered, which helps ensure proper fit and easier installation

from

$64.77

Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.

Product Features:

Direct replacement and operation
Includes easy to follow instructions with no need for any specialized tools or equipment
Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key

In-Demand Voltage Regulator Parts for 2003 Ford Crown Victorias

Select from 1 premium Voltage Regulator Parts parts for your 2003 Ford Crown Victoria.

show more show less

from

$17.79

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Most Sold 2003 Ford Crown Victoria Starter Parts

Explore our best-selling Ford parts for the 2003 Crown Victoria among 12 OEM and aftermarket options starting from $50.99.

show more show less

from

$109.99

Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$133.99

Carquest Premium Starters and all components are thoroughly inspected and tested to meet or exceed O.E.M. specifications. Every remanufactured unit is 100% performance tested from component through final assembly, to ensure dependable service and reliable

Product Features:

Each unit is triple-tested to ensure quality and performance
All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672

from

$179.99

Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
All new components are utilized to ensure long service life
Internal electronics are upgraded for heavy duty reliability (where applicable)
Armatures and commutators are 100% load tested
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-10478

from

$214.99

Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:

Premium 100% New Starter
Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life

from

$236.35

Built with original equipment quality components to withstand excessive heat and high electrical demand
Identical in fit and performance to the OE parts they replace
The perfect solution for certain problematic late-model applications that place an extreme burden on unit components in a high-heat environment
100% full-load tested for proven starting/charging performance
Lifetime warranty

from

$227.08

Motorcraft® starter motor assemblies are built to fit Ford and Lincoln vehicles and are available in new or remanufactured versions to help meet your customers’ needs.

Product Features:

Recommended for two- to eight-year-old vehicles
Meets Ford Motor Company engineering specifications for durability and reliability
Withstands 20,000 cranks or better than 18 years of 3-times-a-day starting

from

$174.99

Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:

Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life

from

$238.67

Built to last using the highest quality materials and the most technologically advanced manufacturing processes
Remanufactured using more new parts than any other unit
100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
Solenoid with 100% new terminal hardware, contact face and high temperature cap, are completely disassembled and computer performance tested for pull/hold strength
100% new long life self-lubricating brushes
Gear train all new bushings
Drive with 100% new bushings, springs, rollers, washers caps and high temperature lubrication
Gear train lubricated with OE-specified grease providing protection from – 4 0 ?F to +3 02 ?F
Commutator remachined to Bosch tight tolerances
Permanent magnets/field coils tested for field strength and shorts (replaced with new as required)
Armature continuity tested, gauged, straightened and shimmed
All electrical connections resoldered
All shaft splines and load bearing surfaces lubricated with OE high temperature grade

from

$191.08

Starter

from

$123.99

Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance and endurance. All new units offer unmatched performance and reduce downtime.

Product Features:

High Quality components form the foundation our parts are built from
Transpo innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs
Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
Integrated magnetic switch provides protection against weak power from batteries.
Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf

from

$52.99

from

$50.99

Top-Rated Alternators and Starters Brands For Your 2003 Ford Crown Victoria

Shop for the best-rated brands offering Alternators and Starters and other products for your 2003 Ford Crown Victorias. Below you’ll find some of our best rated Alternators and Starters from Carquest Professional and Carquest Premium, and more. Alternators and Starters from these brands that fit a 2003 Crown Victoria start at just $17.79 and are rated as high as 5 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Professional 2003 Ford Crown Victoria Alternators and Starters

When it comes to maintaining or upgrading your 2003 Ford Crown Victoria, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest Professional ticks all of those boxes. We offer a wide selection of Carquest Professional Alternators and Starters, specifically designed for the 2003 Ford Crown Victoria. With over 3 Carquest Professional brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $179.99, with an average price of just $245.99. Plus, with over 73 customer reviews and an average rating of 5 stars, you can trust that our Carquest Professional Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$179.99

(73)

Starter-New

“make sure all wire connections are clean and tight”

from
$277.99

This product is not rated

Alternator: New, 130 Amps

“”

from
$279.99

This product is not rated

Alternator: New, 135 Amps

“”

Popular Carquest Premium 2003 Ford Crown Victoria Alternators and Starters

Carquest Premium auto parts is one of the highest quality Alternators and Starter brands in the market. Any 2003 Ford Crown Victoria owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2003 Crown Victoria, Advance Auto Parts carries a full inventory of 8 Carquest Premium Alternators and Starters. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Alternators and Starters range from $17.79 to $306.99, plus, with more than 173 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Alternators and Starters below will deliver on both quality and value.

from
$17.79

This product is not rated

Alternator Connector

“”

from
$306.99

This product is not rated

Alternator: Remanufactured, 135 Amps

“”

from
$75.99

This product is not rated

Ignition Lock Cylinder CSC1201

“”

FAQs for 2003 Ford Crown Victoria Alternators and Starters

Which Alternators and Starters are best-sellers for 2003 Ford Crown Victorias?

Out of 34 Alternators and Starters that fit 2003 Ford Crown Victorias, the following parts are the top sellers:

Starter-New (15020011) – $179.99
Alternator Connector (12472611) – $17.79
Ignition Lock Cylinder: No Keys Included, Codeable (11865636) – $93.99

What’s the price range for 2003 Ford Crown Victoria Alternators and Starters?

Alternators and Starter prices for the 2003 Ford Crown Victoria start at $14.97 and go up to $306.99 for the most premium parts.

What’s the average price of a Alternators and Starter for a 2003 Ford Crown Victoria?

The average price for Alternators and Starters for the 2003 Ford Crown Victoria is $160.67. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Alternators and Starters for other Ford Crown Victoria model years?

Yes, we currently carry Alternators and Starters for 19 model years of Ford Crown Victorias between 1992 and 2011. Alternators and Starters are bought most frequently for the following model years: 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, and 2002.

What are the cheapest Alternators and Starters for my 2003 Ford Crown Victoria?

The cheapest 2003 Ford Crown Victoria Alternators and Starters we carry in stock are:

Alternator Pulley (12064163) – $14.97
Alternator Connector (12472611) – $17.79
MOTOR – WINDOW (12417052) – $19.99
Alternator Adapter P (12570123) – $41.47
Starter Solenoid (12546245) – $50.99

What are the top-rated Alternators and Starters that fit the 2003 Ford Crown Victoria?

Out of 2,000 reviews by customers, our 2003 Ford Crown Victoria Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 2003 Ford Crown Victoria and their top-rated products:

Starter Parts
- Starter Remanufactured Standard (10052939) – $109.99
- Starter Remanufactured (5220777) – $133.99
- Starter-New (15020011) – $179.99
Ignition Lock Parts
- Starter Remanufactured Standard (10052939) – $109.99
- Starter Remanufactured (5220777) – $133.99
- Starter-New (15020011) – $179.99

What types of Alternators and Starters do you sell for my 2003 Ford Crown Victoria?

As of 2/5/25, these are some of the most in-demand types of Alternators and Starters for a 2003 Ford Crown Victoria:

Can I get help with 2003 Ford Crown Victoria Alternators and Starter orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Alternators and Starters and more.

What is your return policy for Ford Crown Victoria Alternators and Starters?

Advance Auto Parts keeps returns simple. For new Ford Crown Victoria Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2003 Ford Crown Victoria Alternators and Starters

Carquest Premium – Alternator Connector (Part No.PTA1025)

Motorcraft – Alternator Pulley (Part No.F4050196448MTR)

Motorcraft – Motorcraft Alternator Pulley (Part No.F4050672840MTR)

Carquest Premium – Starter Solenoid (Part No.SBC2133)

Carquest Premium – Multi Purpose Relay (Part No.SBC2105)

Carquest Premium – Starter Solenoid (Part No.SBC2116)

Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920004A)

Carquest Premium – Alternator Connector (Part No.PTA1348)

Motorcraft – MOTOR – WINDOW (Part No.WPT-119)

Carquest Premium – Multi Purpose Connector (Part No.PTA2983)

Carquest Premium – Ignition Lock Cylinder CSC1662 (Part No.CSC1662)

Carquest Premium – Ignition Lock Cylinder CSC1201 (Part No.CSC1201)

Motorcraft – Ignition Lock Cylinder: No Keys Included, Codeable (Part No.SW-6383)

Motorcraft – Motorcraft Ignition Lock Cylinder (Part No.M5040294358MTR)

Bosch – Remanufactured Starter (Part No.SR7602X)

Motorcraft – Starter, Remanufactured (Part No.F5000197271MTR)

Bosch – Professional Preferred Starter, Remanufactured (Part No.F5000135000BOS)

Carquest Premium – Starter Remanufactured (Part No.3242S)

Carquest Premium – Starter Drive (Part No.SDC1032)

Carquest Premium – Starter Drive (Part No.SDC1004)

Carquest Premium – Alternator: Remanufactured, 130 Amps (Part No.7776A)

Carquest Premium – Alternator 8472A: Remanufactured, 135 Amps (Part No.8472A)

Carquest Premium – Alternator: Remanufactured, 130 Amps (Part No.7764-P57A)

DENSO – First Time Fit Alternator, Remanufactured (Part No.F4000447392ND)

Carquest Professional – Alternator: New, 150 Amps (Part No.11432AN)

Bosch – Alternator (Part No.F40001332207BOS)

Carquest Professional – Alternator: New, 135 Amps (Part No.8315AN)

Carquest Premium – Alternator: Remanufactured, 95 Amps (Part No.7753A)

Carquest Premium – Alternator 8472A: Remanufactured, 135 Amps (Part No.8472A)

Carquest Premium – Alternator: Remanufactured, 130 Amps (Part No.8313A)

Carquest Professional – Alternator: New, 135 Amps (Part No.8315AN)

Bosch – Professional Preferred Alternator, Remanufactured (Part No.F4000459688BOS)

Carquest Premium – Alternator: Remanufactured, 135 Amps (Part No.8315A)

WAI – Alternator: New, 200 Amps (Part No.8315N-HO)

Bosch – Alternator: Remanufactured, 130 Amps (Part No.AL7618X)

Carquest Professional – Alternator: New, 130 Amps (Part No.8313AN)

Bosch – Professional Preferred Alternator, Remanufactured (Part No.F4000376085BOS)

WAI – Alternator: New, 130 Amps (Part No.8313N)

OE+ – Alternator (Part No.F40002246737IAP)

OE+ – Alternator (Part No.F40002246308IAP)

Forecast – Alternator Adapter P (Part No.F4075679252FOR)

Motorcraft – MOTOR – WINDOW (Part No.WPT-119)

Motorcraft – Alternator Pulley (Part No.F4050196448MTR)

Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920004A)

Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.924-724)

Motorcraft – Ignition Lock Cylinder: No Keys Included, Codeable (Part No.SW-6383)

Carquest Premium – Ignition Lock Cylinder CSC1201 (Part No.CSC1201)

Motorcraft – Motorcraft Ignition Lock Cylinder (Part No.M5040294358MTR)

Dorman – Ignition Lock Cylinder (Part No.M5040684430DOR)

Carquest Premium – Alternator Connector (Part No.PTA1025)

Carquest Standard – Starter Remanufactured Standard (Part No.3267SV)

Carquest Premium – Starter Remanufactured (Part No.3221S)

Carquest Professional – Starter-New (Part No.3221SN)

Bosch – Premium 100% New Starter (Part No.SR7533N)

Bosch – Professional Preferred Starter, New (Part No.F5000135003BOS)

Motorcraft – Starter, Remanufactured (Part No.F5000197271MTR)

Bosch – Premium 100% Remanufactured Starter (Part No.SR7533X)

Bosch – Professional Preferred Starter, Remanufactured (Part No.F5000135000BOS)

Autopart International Inc – Starter (Part No.F50002268183API)

Carquest HD Electrical – New Starter (Part No.72-3267N)

Carquest Premium – Starter Drive (Part No.SDC1032)

Carquest Premium – Starter Solenoid (Part No.SBC2116)