2003 Dodge Ram 3500 Differentials

Essential 2003 Dodge Ram 3500 Differentials

Yukon Gear – Pinion Install Kit For ’03 And Newer Chrysler Dodge Truck 9.25" Front Differential (Part No.13094)

Pinion Install Kit For '03 And Newer Chrysler Dodge Truck 9.25" Front Differential

from

$284.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 9.25″ front
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)

Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed)

from

$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 60 and 70
  • Powr Lok positraction only
See More

USA Standard Gear – Ring & Pinion Gear Set For Chrysler 9.25" Front In A 4.56 Ratio (Part No.36311)

Ring & Pinion Gear Set For Chrysler 9.25" Front In A 4.56 Ratio

from

$439.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits Chrysler 9.25″ front
  • 9.25″ ring gear diameter
  • 12 ring gear bolts
  • 4.56 ratio
See More

Yukon Gear – 11.5" GM Standard Open Side Gear Thrust Washer (Part No.33387)

11.5" GM Standard Open Side Gear Thrust Washer

from

$31.99
11.5″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 11.5″
See More

Motive Gear – Differential Pinion Seal (Part No.9316)

Differential Pinion Seal

from

$16.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

USA Standard Gear – Master Overhaul Kit Dana 70 U Differential (Part No.37024)

Master Overhaul Kit Dana 70 U Differential

from

$389.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 70U
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Set Up Bearing (Part No.56080)

Set Up Bearing

from

$198.99
NO RETURN HM807046 SET-UP Bearing (1 SINGLE Bearing) for Dana 80 , 11.5AAM , 4.125″ OD .

Product Features:
  • Set up bearing
  • Fits HM807046 pinion bearing
  • Easily slips on and off pinion journal to allow for pinion depth adjustment
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Powertrax – Grip LS Traction System (Part No.LS309231)

Grip LS Traction System

from

$511.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 80, 37 Spline (Part No.39012)

Replacement Spider Gear Set For Dana 80, 37 Spline

from

$318.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 80, 37 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-544)

Differential Pinion Yoke Assembly

from

$181.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)

Repleacement Ring Gear Bolt For Dana 80

from

$7.99
Repleacement ring gear bolt for Dana 80. 9/16″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 80
  • 9/16″ x 18 thread
See More

Yukon Gear – 11.5" Chrysler & GM Helical Gear Type Positraction (Part No.32244)

11.5" Chrysler & GM Helical Gear Type Positraction

from

$1806.99
11.5″ Chrysler Helical gear Type positraction.

Product Features:
  • Fits GM and Chrysler 11.5″
  • 30 spline
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55474)

DIFFERENTIAL GASKET

from

$66.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Bearing Race Driver (Part No.56015)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM88610 race
  • All steel construction
See More

Pro-King – Crush Sleeve (Part No.716B034)

Crush Sleeve

from

$7.19
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Differential Pinion Yoke Washer (Part No.742A215)

Differential Pinion Yoke Washer

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Driveworks – Taper Bearing Set (Part No.S-A-38)

Taper Bearing Set

from

$13.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Powr Lok Carrier Case For Dana 70, 4.10 & Down (Part No.20032)

Replacement Powr Lok Carrier Case For Dana 70, 4.10 & Down

from

$869.99
Yukon replacment Powr Lok carrier case for Dana 70, 4.10 & down (incl ABS).

Product Features:
  • Powk Lok positraction carrier case
  • Does not include spider gears
  • Fits Dana Spicer 70
  • 4.10 and down ratio only
  • ABS and non-ABS compatible
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 80 (Part No.55006)

Replacement Pinion Depth Shims For Dana 80

from

$27.99
Replacment Pinion depth shims for Dana 80 (between pin head & bearing).

Product Features:
  • Pinion depth shims for Dana Spicer 80
  • Fits between pinion head and bearing
See More

Yukon Gear – 4340 Chrome-Moly 35 Spline Inner Axle Upgrade For Dana 60, 18.59" Long (Part No.21694)

4340 Chrome-Moly 35 Spline Inner Axle Upgrade For Dana 60, 18.59" Long

from

$329.99
Yukon 4340 Chrome-Moly replacement inner axle for Dana 60, 18.59″ long, 35 spline.

Product Features:
  • 35 spline
  • 18.49″ long
  • Fits Dana Spicer 60 in 1994-1999 Dodge
  • Left hand inner
  • 5-332x U-joint
  • 4340 Chromoly
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.RA29RL)

Differential Bearing Kit - Koyo

from

$156.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • BEARING KIT 98 & LATER DANA 60 FORD
See More

Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)

Extra-Large Clamshells For Large Applciations

from

$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.

Product Features:
  • Extra Large clamshell
  • Fits carrier bearing puller
See More

Yukon Gear – 11.5" GM & Chrysler Pinion Nut (Part No.33151)

11.5" GM & Chrysler Pinion Nut

from

$37.99
Product Features:
  • Pinion nut for GM and Chrysler 11.5″
  • 12 point 36mm socket
See More

Yukon Gear – Pinion Nut (Part No.33142)

Pinion Nut

from

$10.99
Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:
  • Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
  • 7/8″ x 14 thread
See More

2003 Dodge Ram 3500 Differentials

Maybe you’re in the middle of a full rebuild of that 2003 Dodge Ram 3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 181 different Differentials in our inventory ranging from $2.99 to $4,019.99. That means you can find the exact parts or products you need to keep that 2003 Dodge Ram 3500 running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2003 Dodge Ram 3500. Royal Purple, Driveworks, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2003 Dodge Ram 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 714 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.2 stars and Taper Bearing Set with 2.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 2003 Dodge Ram 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2003 Dodge Ram 3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 Dodge Ram 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Ram 3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Dorman Differentials

We carry Dorman parts in our stock across Differential Ring and Pinions and Differential Covers categories, plus more. For a 2003 Dodge Ram 3500, our most popular Dorman Differentials include:
Differential Ring And Pinion Set
from $384.99
(2)
Differential Ring And Pinion Set
Differential Ring and Pinions
Rear Differential Cover
from $77.99
(2)
Rear Differential Cover
Differential Covers

FAQs for 2003 Dodge Ram 3500 Differentials

What are the most purchased Differentials for the 2003 Dodge Ram 3500?

Out of 181 Differentials for the 2003 Dodge Ram 3500, the most popular in our inventory are:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 2003 Dodge Ram 3500 Differentials?

Top-rated Differentials for your 2003 Dodge Ram 3500 based on customer reviews/ratings are:
Multi Purpose Seal
from $44.99
(5)
Multi Purpose Seal
“How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”
Taper Bearing Set
from $13.79
(4)
Taper Bearing Set
“Worked great on my 1981 Chevy C20”
Multi Purpose Seal
from $14.49
(1)
Multi Purpose Seal
“great product exact fit as OEM front differential pinion seal”