2003 Chevrolet Corvette Intake Manifolds
Enhance and Protect Your 2003 Chevrolet Corvette with Quality Intake Manifolds
Maintaining the performance of your 2003 Chevrolet Corvette starts with choosing the right parts, and high-quality Intake Manifolds help ensure a reliable and efficient vehicle. At Advance Auto Parts, we offer Intake Manifolds specifically for the 2003 Chevrolet Corvette, ensuring a perfect fit and lasting durability. Choosing to shop with Advance Auto Parts means you’re making a smart decision to prioritize both quality and reliability for your vehicle.
Affordable and Reliable Intake Manifolds for Every Budget
Finding affordable, quality Intake Manifolds is easy at Advance Auto Parts. With prices starting as low as $467.99 and an average price of $731.74, you can choose one that fits your budget while delivering the quality you expect. Our Intake Manifolds are competitively priced, ranging from $467.99 to $1,400.99, so you get value without compromising on strength or reliability.
Explore Related Parts for a Complete Solution
To further enhance your 2003 Chevrolet Corvette, don’t miss our related parts categories, including Intake Manifold Expansion Plugs and Intake Manifold Gasket Sets. These additions will round out your repair or upgrade project and ensure your vehicle is ready for any adventure.
Intake Manifolds for Your 2003 Chevrolet Corvette
MSD Ignition – Atomic; AirForce; LS1; 2; 6; Intake Manifold (Part No.2702)
from
$1400.99
When you’re serious about power for your LS or new LT1 engine, call in the AirForce! The all-new MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding – all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails including MSD’s Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Product Features:
See More
Product Features:
- Polymer Material Resists Heat Soak
- 103mm Throttle Bore For Greater Air Flow
- Direct Flow Path Runner Design
- Allows For The Use Of Stock Fuel Rails
Holley – Dual Plane Intake – GM LS1/LS2/LS6 – Black (Part No.300-130BK)
from
$589.99
Product Features:
See More
- 1500-6500 RPM power band
- 4150 Square bore flange
- Optimized runner layout and constant cross sectional area – broad torque curve, best vehicle performance from 1500-6500 RPM
- Minimum carb flange height means it fits in vehicles with minimal or no hood modifications
- Great for carbureted or throttle body EFI street applications
- Cast aluminum construction and efficient casting design for light weight, consistent wall thicknesses and improved casting quality
- Weighs 15.14 lbs.
- Height (front) – 5.07″ from front lifter valley cover to carb mounting flange
- Height (rear) – 6.14″ from rear lifter valley cover to carb mounting flange
- Port size – 2.72″ height x 1″ wide
- Mounting flange gasket type – O-ring
- Includes Viton O-rings – Viton is a registered trademark of DuPont Performance Elastomers
Holley – Single Plane Intake – GM LS1/LS2/LS6 (Part No.300-132)
from
$467.99
Product Features:
See More
- 2500-7000 RPM power band
- 4150 Square bore carb mounting flange (accepts up to 1.75″ diameter throttle bores)
- Optimized runner layout and constant cross sectional area – broad torque curve, best vehicle performance from 2500-7000 RPM
- Minimum carb flange height – fits in vehicles with minimum hood modifications
- Cast aluminum construction – great manifold for centrifugal blower, turbocharged or NOS power adder applications
- Efficient casting design – lightweight, consistent wall thicknesses, improved casting quality
- Weight – 11.5 lbs.
- Height (front) – 4.95″ to the lifter valley cover flange at the engine block front flange
- Port size – 2.659″ height x .918″ wide
- Includes Viton intake to cylinder head O-ring gaskets – Viton is a registered trademark of DuPont Performance Elastomers
Holley – Dual Plane Intake – GM LS1/LS2/LS6 (Part No.300-130)
from
$467.99
Product Features:
See More
- 1500-6500 RPM power band
- 4150 Square bore flange
- Optimized runner layout and constant cross sectional area – broad torque curve, best vehicle performance from 1500-6500 RPM
- Minimum carb flange height means it fits in vehicles with minimal or no hood modifications
- Great for carbureted or throttle body EFI street applications
- Cast aluminum construction and efficient casting design for light weight, consistent wall thicknesses and improved casting quality
- Weighs 15.14 lbs.
- Height (front) – 5.07″ from front lifter valley cover to carb mounting flange
- Height (rear) – 6.14″ from rear lifter valley cover to carb mounting flange
- Port size – 2.72″ height x 1″ wide
- Mounting flange gasket type – O-ring
- Includes Viton O-rings – Viton is a registered trademark of DuPont Performance Elastomers
FAQs for 2003 Chevrolet Corvette Intake Manifolds
Which Intake Manifolds are the top sellers for the 2003 Chevrolet Corvette?
Out of 4 Intake Manifolds that fit 2003 Chevrolet Corvettes, the following parts are the top sellers:
from
$1400.99
This product is not rated
Atomic; AirForce; LS1; 2; 6; Intake Manifold
Intake Manifolds
How can I make sure that a part will be compatible with my 2003 Chevrolet Corvette?
Our Chevrolet Corvette aftermarket and OEM parts are designed specifically for the 2003 model. You can always find your specific fitment and compatibility for your 2003 Chevrolet on an individual product page.
What is the price range for 2003 Chevrolet Corvette Intake Manifolds?
The range of prices of Intake Manifolds for the 2003 Chevrolet Corvette goes from $467.99 up to $1,400.99 for the most premium parts.
What is the average price of 2003 Chevrolet Corvette Intake Manifolds?
2003 Chevrolet Corvette Intake Manifolds average $731.74 for our selection of OEM and aftermarket parts.
Does Advance Auto Parts sell Intake Manifolds for other Chevrolet Corvette model years?
Can I get help with 2003 Chevrolet Corvette Intake Manifolds orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Intake Manifolds and more.
What is your return policy for Chevrolet Corvette Intake Manifolds?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Intake Manifolds and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
Intake Manifolds For Other Chevrolet Corvette Model Years
Looking for parts for a different model year of the Chevrolet Corvette? Below, you’ll find links to Intake Manifolds for a range of model years, from 1955 models all the way up to 2019. At Advance Auto Parts, we carry high-quality OEM and aftermarket auto parts for popular years like 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, and more, ensuring you have access to the best options for your specific needs. Choosing an Intake Manifolds from Advance Auto Parts means investing in top-tier parts that will keep your Chevrolet Corvette running at its best, no matter the year.
