2003 Chevrolet Corvette Exhaust Mufflers
More 2003 Chevrolet Corvette Exhaust Mufflers
Find your specific 2003 Chevrolet Corvette original or aftermarket Exhaust Mufflers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2003 Chevrolet Corvette Exhaust Mufflers
Flowmaster Inc. – 80 Series Muffler, 2.5in Offset Inlet 2.5in Same Side Out Outlet, Non-Reversible, Aggressive Sound (Part No.52580)
from
$206.99
The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros & Firebirds with transverse mufflers. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042541)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.22324)
from
$177.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.22397)
from
$151.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18417)
from
$151.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.942551)
from
$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842546)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18418)
from
$154.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.842551)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Dynomax – Super Turbo Muffler: Di Fit Aluminized Steel, 14" L, 2.5" In, 2.25" Out, Oval (Part No.17757)
from
$155.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance, while maintaining a mellow performance tone.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Dyno proven to flow up to 700 SCFM
- Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
- 1.75-inch to 3-inch inlet / outlet configurations
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.22161)
from
$149.99
Designed to deliver superior flow and OE-style sound, Walker® Quiet-Flow® mufflers are available for top-selling domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942546)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42541)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Flow FX Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Aggressive Sound (Part No.71226)
from
$59.99
Flow FX Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Aggressive Sound
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.22396)
from
$184.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942541)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.22160)
from
$164.99
Designed to deliver superior flow and OE-style sound, Walker® Quiet-Flow® mufflers are available for top-selling domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Popular 2003 Chevrolet Corvette Exhaust Mufflers Categories
2003 Chevrolet Corvette Exhaust Mufflers
Maybe you’re in the middle of a full rebuild of that 2003 Chevrolet Corvette. Maybe you just need a couple of Exhaust Mufflers. Either way, Advance Auto Parts has 1 different Exhaust Mufflers in our inventory priced around $206.99. That means you can find the exact parts or products you need to keep that 2003 Chevrolet Corvette running smoothly.
Exhaust Mufflers are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 2003 Chevrolet Corvette. Flowmaster Inc. are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Exhaust Mufflers for your 2003 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Exhaust Mufflers to keep your 2003 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Exhaust Mufflers Brands To Make Your 2003 Chevrolet Corvette Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Mufflers make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Exhaust Mufflers brands and parts.
