2003 Chevrolet C4500 Kodiak Drivetrains
Find Your Specific 2003 Chevrolet C4500 Kodiak Drivetrains
Below you will find various in-demand Chevrolet Drivetrains, components and accessories for your 2003 C4500 Kodiak. Advance Auto Parts has popular C4500 Kodiak parts like Differentials, Drive Shafts and Axles, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other C4500 Kodiak model years including
2004,
2005,
2006,
2007,
2008,
2009 and more. Select a category of 2003 Chevrolet C4500 Kodiak Drivetrains below and start saving instantly.
Popular 2003 Chevrolet C4500 Kodiak Drivetrains Categories
Essential Drivetrains for 2003 Chevrolet C4500 Kodiaks
Yukon Gear – Differential (Part No.26048)
from
$1145.00
Differential
Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)
from
$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 70 and 80
Dorman – Vacuum Actuator, Axle and Auxiliary Heater (Part No.600-104)
from
$76.99
This 4WD actuator valve directly replaces the original equipment valve on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD actuator valve matches the fit and function of the stock valve on specific vehicle applications
- Effective fix – addresses four-wheel drive failures caused by failed original valve
- Smart solution – delivers reliable fit and function for competitive price
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Yukon Gear – Pinion Nut For Spicer S135 & S150 (Part No.33203)
from
$42.99
Pinion nut for Spicer S135 & S150.
Product Features:
See More
Product Features:
- Pinion nut
- Fits Dana Spicer S135 and S150
FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT5)
from
$21.29
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
USA Standard Gear – Replacement Spider Gear Set For Dana 80, 37 Spline (Part No.39012)
from
$318.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 80, 37 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – 1480 U-Bolt Kit (Part No.41191)
Yukon Gear – Replacement Pinion Depth Shims For Dana 80 (Part No.55024)
Yukon Gear – Replacement Yoke For Dana 80 With A 1550 U/Joint Size (Part No.41215)
from
$349.99
Yukon replacement yoke for Dana 80 with a 1550 U/joint size. 4.964″ snap ring span, 1.375″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
See More
Yukon Gear – Differential Carrier (Part No.20146)
from
$744.99
Differential Carrier
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
Dorman – Spindle Nut 2-1/2"-12 Hex Size 3 1/4 (Part No.615-979)
from
$265.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Differential Pinion Yoke Assembly (Part No.697-547)
from
$279.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Motive Gear – Differential Gear Install Kit (Part No.D80IK)
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
Motive Gear – Differential Carrier Bearing Kit – Timken (Part No.R10.5CKT)
from
$93.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- CARRIER BEARING KIT FRD 10.5″ W/TIM
Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)
from
$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 60, 70, 70U, 70HD and 80
- 1480 u-joint size
- Includes two straps and four bolts
Yukon Gear – Differential (Part No.26046)
from
$994.99
Differential
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Motive Gear – Differential Carrier Gear Kit (Part No.707280XR)
from
$172.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
Yukon Gear – Minor Install Kit For Dana 80 Differential (4.125" O.D – Pinion Race) (Part No.12030)
from
$188.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
- Included are a pinion seal, complete shim kit, marking compound and brush.
National – Multi-Purpose Bearing (Part No.A-5)
from
$16.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
FAG US – Shaft Seal (Part No.SS2923)
from
$21.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Yukon Gear – Replacement Yoke For Dana 80 With A 1480 U/Joint Size (Part No.41035)
from
$235.99
Yukon replacement yoke for Dana 80 with a 1480 U/joint size. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 37 spline
- 1480 u-joint size
- 4.188″ snap ring span
- 1.375″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Finned Aluminum Cover For Dana 80 (Part No.32337)
National – Taper Bearing Cone: 0.72" Cone Length, 1.3750 Cone Bore, 0.16" Standout (Part No.LM48548)
from
$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive┐testing throughout design and development processes by National engineers for quality you can count on
- Taper Bearing Set Part Number: A-5
- Taper Bearing Cup Part Number: LM48510
Upgrade your 2003 Chevrolet C4500 Kodiak with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2003 Chevrolet C4500 Kodiak, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your C4500 Kodiak functioning at its best. At Advance Auto Parts, we offer a wide selection of 115 Drivetrains for the 2003 Chevrolet C4500 Kodiak, designed to meet your needs without breaking the bank.
From
Differential
replacements to
Drive Shafts and Axles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2003 Chevrolet C4500 Kodiak at great prices.
Our Drivetrains inventory for this model
ranges from just $4.99 to $1,145.00, with
an average price of $257.87.
Our 115 Drivetrains in stock come from 10 trusted brands, so you’re sure to find the right part for your 2003 Chevrolet C4500 Kodiak without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Chevrolet C4500 Kodiak, we stock popular OEM and aftermarket Drivetrains from top names
like Valvoline National, and more.
Valvoline Drivetrains
start at just $14.49 and boast an impressive 4.8 stars average rating from customers.
With 328 customer reviews and counting, our 2003 Chevrolet C4500 Kodiak Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2003 Chevrolet C4500 Kodiak is always ready to roll. We’re committed to providing you with everything you need to keep your C4500 Kodiak in top shape, all in one place.
Start shopping confidently below for your 2003 Chevrolet C4500 Kodiak!
Best-Selling Differentials for 2003 Chevrolet C4500 Kodiaks
Enhance the driving experience in your Chevrolet with 91 quality Differential components, starting at $4.99.
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
National – Multi-Purpose Bearing (Part No.A-5)
from
$16.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
National – Bearing Race (Part No.3920)
from
$16.79
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)
from
$7.99
Repleacement ring gear bolt for Dana 80. 9/16″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 80
- 9/16″ x 18 thread
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)
National – Bearing Race (Part No.LM48510)
from
$6.79
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)
from
$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
- 0.225″ diameter
- 1.870″ long
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 3.73 Ratio (Part No.24077)
from
$449.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 11.25″ ring gear diameter
- 37 spline pinion
- 12 ring gear bolts
- 3.73 ratio
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R80RMKT)
from
$281.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- MSTR KIT DANA 80
Motive Gear – Differential Bearing Kit – Koyo (Part No.R80R)
from
$219.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- BEARING & SEAL KT DANA 80
Yukon Gear – Chrome Replacement Cover For Dana 80 (Part No.32006)
from
$69.99
Chrome replacement cover for Dana 80.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- Chrome
Motive Gear – Differential Carrier Bearing Kit – Timken (Part No.R10.5CKT)
from
$93.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- CARRIER BEARING KIT FRD 10.5″ W/TIM
Yukon Gear – Differential (Part No.26048)
from
$1145.00
Differential
Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 80 In A 3.31 Ratio (Part No.24323)
from
$1010.00
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 11.25″ ring gear diameter
- 37 spline pinion
- 12 ring gear bolts
- 3.31 ratio
Yukon Gear – Differential (Part No.26046)
from
$994.99
Differential
Most Popular 2003 Chevrolet C4500 Kodiak Drive Shafts and Axles
Customize your Chevrolet with 5 Drive Shafts and Axles products
like Axle Shaft Bearings,
Drive Shaft Bearings, and
Drive Shaft Slip Yoke Sleeves, all
priced under $279.99.
National – Taper Bearing Cone: 0.72" Cone Length, 1.3750 Cone Bore, 0.16" Standout (Part No.LM48548)
from
$13.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive┐testing throughout design and development processes by National engineers for quality you can count on
- Taper Bearing Set Part Number: A-5
- Taper Bearing Cup Part Number: LM48510
Dorman – Differential Pinion Yoke Assembly (Part No.697-547)
from
$279.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Yukon Gear – Extra-Large Clamshells For Large Applciations (Part No.56059)
from
$209.99
Extra large clamshells for use with Dana 70HD, Dana 80, AAM 11.5″, Ford 9.75″, Ford 10.25″ & Ford 10.5″.
Product Features:
See More
Product Features:
- Extra Large clamshell
- Fits carrier bearing puller
FAG US – Cone (Part No.KLM48548)
from
$13.99
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
FAG US – Cup (Part No.LM48510)
from
$7.69
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Top Picks for 2003 Chevrolet C4500 Kodiak Universal Joints
Upgrade Chevrolet C4500 Kodiaks with top-quality Universal Joints parts, including 17 OEM and aftermarket selections for your 2003 model.
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.351)
from
$54.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Spicer – Universal Joint, Greaseable Spicer 1550 Series (Part No.5-155X)
from
$76.99
Product Features:
See More
- Kit includes new snap rings.
- Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
- Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
- Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.
Spicer – Universal Joint, Greaseable 1480 Series OSR (Part No.5-188X)
from
$46.49
Product Features:
See More
- Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
- Bearing cups are heat treated for strength; precision-ground and case-hardened for durability.
- Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
- Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.358)
from
$52.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Spicer – Universal Joint (Part No.SPL55X)
from
$68.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.282)
from
$64.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Spicer – Universal Joint (Part No.SPL70X)
from
$106.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Yukon Gear – 1480 Lifetime Series U/Joint (Part No.42023)
from
$98.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ span ring span. 1.375″ cap diameter. Outside snap ring. This U/Joint is a driveline U/Joint.
See More
Yukon Gear – Replacement Yoke For Dana 80 With A 1410 U/Joint Size (Part No.41034)
from
$334.99
Yukon replacement yoke for Dana 80 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 37 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – 1480 U-Bolt Kit (Part No.41191)
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.281)
from
$54.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Yukon Gear – Replacement Yoke For Dana 80 With A 1480 U/Joint Size (Part No.41035)
from
$235.99
Yukon replacement yoke for Dana 80 with a 1480 U/joint size. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- 37 spline
- 1480 u-joint size
- 4.188″ snap ring span
- 1.375″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – 1410 Lifetime Series U/Joint (Part No.42022)
from
$84.99
Yukon 1410 Lifetime Series U/Joint. 4.188″ span ring span. 1.188″ cap diameter. Outside snap ring.
See More
Yukon Gear – 1410 U/Joint With Zerk Fitting (Part No.42009)
from
$61.99
Yukon 1410 U/Joint with zerk fitting. 4.188″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.262)
from
$55.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)
from
$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 60, 70, 70U, 70HD and 80
- 1480 u-joint size
- Includes two straps and four bolts
In-Demand 4WD Components for 2003 Chevrolet C4500 Kodiaks
Select from 1 premium 4WD Components parts for your 2003 Chevrolet C4500 Kodiak.
Dorman – Vacuum Actuator, Axle and Auxiliary Heater (Part No.600-104)
from
$76.99
This 4WD actuator valve directly replaces the original equipment valve on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD actuator valve matches the fit and function of the stock valve on specific vehicle applications
- Effective fix – addresses four-wheel drive failures caused by failed original valve
- Smart solution – delivers reliable fit and function for competitive price
- Trustworthy quality – backed by team of designers and engineers in the United States
Most Sold 2003 Chevrolet C4500 Kodiak Spindles
Explore our best-selling Chevrolet parts for the 2003 C4500 Kodiak among 1 OEM and aftermarket options starting from $265.99.
Dorman – Spindle Nut 2-1/2"-12 Hex Size 3 1/4 (Part No.615-979)
from
$265.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top-Rated Drivetrains Brands For Your 2003 Chevrolet C4500 Kodiak
Shop for the best-rated brands offering Drivetrains and other products for your 2003 Chevrolet C4500 Kodiaks. Below you’ll find some of our best rated Drivetrains from Valvoline and National, and more. Drivetrains from these brands that fit a 2003 C4500 Kodiak start at just $14.49 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 2003 Chevrolet C4500 Kodiak Drivetrains
When it comes to maintaining or upgrading your 2003 Chevrolet C4500 Kodiak, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2003 Chevrolet C4500 Kodiak. With over 1 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49. Plus, with over 2 customer reviews and an average rating of 4.8 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”
Popular National 2003 Chevrolet C4500 Kodiak Drivetrains
National auto parts is one of the highest quality Drivetrain brands in the market. Any 2003 Chevrolet C4500 Kodiak owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2003 C4500 Kodiak, Advance Auto Parts carries a full inventory of 1 National Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these National Drivetrains range up to $16.99, plus, with more than 39 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
FAQs for 2003 Chevrolet C4500 Kodiak Drivetrains
Which Drivetrains are best-sellers for 2003 Chevrolet C4500 Kodiaks?
Out of 115 Drivetrains that fit 2003 Chevrolet C4500 Kodiaks, the following parts are the top sellers:
- DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99
- Dana 60, Dana 70 & Dana 80 Cover Bolt (11642999) – $5.99
- Greaseable Premium Universal Joint (10086977) – $54.99
What’s the price range for 2003 Chevrolet C4500 Kodiak Drivetrains?
Drivetrain prices for the 2003 Chevrolet C4500 Kodiak start at $4.99 and go up to $1,145.00 for the most premium parts.
What’s the average price of a Drivetrain for a 2003 Chevrolet C4500 Kodiak?
The average price for Drivetrains for the 2003 Chevrolet C4500 Kodiak is $257.87. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Chevrolet C4500 Kodiak model years?
What are the cheapest Drivetrains for my 2003 Chevrolet C4500 Kodiak?
The cheapest 2003 Chevrolet C4500 Kodiak Drivetrains we carry in stock are:
- Side Gear Thrust Washer For Dana 60, 70 & 80 (11642996) – $4.99
- Dana 60, Dana 70 & Dana 80 Cover Bolt (11642999) – $5.99
- Replacement Pinion Nut Washer For Dana 80 (11643022) – $5.99
- Bearing Race (3277372) – $6.79
- Replacement Outer Oil Slinger For Dana 80 (11643417) – $6.99
What types of Drivetrains do you sell for my 2003 Chevrolet C4500 Kodiak?
As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2003 Chevrolet C4500 Kodiak:
Can I get help with 2003 Chevrolet C4500 Kodiak Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.
What is your return policy for Chevrolet C4500 Kodiak Drivetrains?
Advance Auto Parts keeps returns simple. For new Chevrolet C4500 Kodiak Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
