2003 Cadillac Escalade Drivetrains
More 2003 Cadillac Escalade Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2003 Cadillac Escalade, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2003 Cadillac Escalade Drivetrains
Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)
from
$359.99
Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Forged steel
Yukon Gear – Master Overhaul Kit For ’99-’08 GM 8.6" Differential (Part No.14092)
from
$369.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits 1999-2008 GM 8.6″
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)
from
$139.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Pro-King – Differential Cover Plug (Part No.742G484)
from
$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Motive Gear – Differential Pinion Seal (Part No.8610)
from
$3.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)
from
$10.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – GM 8.25" IFS Side Bearing Adjuster Lock Ring, ’07 & Up (Part No.33357)
from
$49.99
8.25IFS 07 & up GM side bearing adjuster lock ring.
Product Features:
See More
Product Features:
- Side adjuster lock ring
- Fits GM 8.2.5″ IFS
National – Bearings (Part No.HM804810)
from
$28.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Bearing Race Driver (Part No.56023)
from
$219.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M88010 race
- All steel construction
SKF – Differential Bearing (Part No.J7060366583SKF)
from
$41.10
Differential Bearing
Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For 8.5" GM (Part No.32238)
from
$61.99
Chrome Moly cross pin shaft for Mini-Spool for 8.5″ GM HD.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.5″
- Chromoly steel for added strength
ACDelco – Black Multi-Purpose Pigtail (Part No.PT2623)
from
$51.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
National – Bearings (Part No.HM89249)
from
$28.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
ACDelco – Trans Case Output Sf (Part No.J1157206932ACD)
from
$44.98
Trans Case Output Sf
Dorman – Four Wheel Drive Selector Switch – Dash Mount (Part No.901-062)
from
$78.99
This 4WD switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD switch is made to match the fit and function of the original switch on specific vehicle applications
- Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Clutch Release Bearing (Part No.S-B-2010)
Motive Gear – Differential Gear Install Kit (Part No.GM8.5IKL)
Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)
from
$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- 2.800″ O.D.
- 1.620″ I.D.
Motive Gear – Differential Carrier (Part No.GM8.6L)
from
$221.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Yukon Gear – 1541H Left Hand Stub Axle For ’98 And Newer 8.25" IFS (Part No.21618)
from
$239.99
Yukon 1541H left hand stub axle for ’88-’11 GM 8.25″ IFS. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- 28 spline
- Fits GM 8.25″ IFS in 1988 – 2011 half ton truck
- Left hand inner
Yukon Gear – Minor Install Kit For GM 8.25" IFS Differential (Part No.12053)
from
$46.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits GM 8.25″ IFS
- Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
Yukon Gear – Differential Gasket (Part No.23030)
from
$67.99
Differential Gasket
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Spartan – Drive Axle Assembly; GM SUV 09-14 GU6 Axle (Part No.RAX0172C)
from
$1636.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.
Product Features:
See More
Product Features:
- Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
- Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
- Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
- Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
Yukon Gear – DiffrlPinBrngSetKit (Part No.13116)
from
$305.99
DiffrlPinBrngSetKit
Yukon Gear – Differential Pinion (Part No.13110)
from
$306.99
Differential Pinion
Cardone – Transfer Case Motor (Part No.48-105)
from
$194.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Product Features:
See More
Product Features:
- All motors are 100% torque tested to ensure strength for proper gear engagement.
- Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Motor magnets are 100% recharged for superior performance and reliability.
- Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
Dorman – Transfer Case Shift Motor (Part No.600-901)
from
$267.99
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
- Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
- 100% new – this transfer case motor is entirely new, not remanufactured like competitors
- Quality assured – vehicle-specific application has been validation tested to ensure quality
Popular 2003 Cadillac Escalade Drivetrains Categories
2003 Cadillac Escalade Drivetrains
You count on your 2003 Cadillac Escalade to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 336 Drivetrains ranging in price from $1.99 to $3,033.99, you’re sure to find everything you need for your 2003 Cadillac Escalade.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 30 different brands like Valvoline, Moog, and Dorman. 2003 Cadillac Escalade Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,983 extensive product reviews on 2003 Cadillac Escalade Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.6 stars and Greaseable Super Strength Universal Joint with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2003 Cadillac Escalade below to get started!
Top-Rated Drivetrains Brands For Your 2003 Cadillac Escalade
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Cadillac Escalade running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Dorman, and even more.
Popular Powertrax Drivetrains
You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 2003 Cadillac Escalade back on the road. Some of the top-rated Powertrax products in these categories are:
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 2003 Cadillac Escalade, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2003 Cadillac Escalade Drivetrains
What are the most purchased Drivetrains for the 2003 Cadillac Escalade?
Out of 336 Drivetrains for the 2003 Cadillac Escalade, the most popular in our inventory are:
What are the top-rated 2003 Cadillac Escalade Drivetrains?
Top-rated Drivetrains for your 2003 Cadillac Escalade based on customer reviews/ratings are:
from
$34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”
