2003 BMW Z4 Performance and Racing Products

The Momentum GT Pro Dry-S Cold Air Intake provides an impressive +90% Airflow increase over stock, allowing the N20 engine to breathe and perform to its greatest potential. The Pro DRY S Filter is made of a 3-layer synthetic media, providing additional air flow and filtration. The Pro DRY S is convenient, as it requires no re-oiling when being cleaned. Unique One-Piece High Quality Housing: A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake. Carbon Fiber Trim On Housing: This Momentum GT intake system offers carbon fiber trim on housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4″ flange and is 6-1/2″ tall. The Pro DRY S performance air filter features 3-layers of synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Outflows Factory Intake by 90 Percent
• High Quality 1-Piece Roto-Molded Sealed Housing
• CAD-Designed Roto-Molded Intake Tube
• Built-In Sight Window Provides Easy Inspection Of Filter

Maximum performance within minutes is what this aFe Stage 1 cold air intake system delivers. Enclosed in a durable 16 gauge heat shield; a massive washable/reusable; 360 deg. conical Pro 5R air filter increases airflow resulting in an additional 6 hp; and 7 lbs./ft/ torque. This intake system also features a unique 3-angle adaptor for increased air velocity. The Pro 5R air filter is constructed with 100 percent polyurethane for long life and multiple cleaning cycles. This intake is the easiest intake on the market to install. Simply remove the factory intake and mount the 3-angle adaptor with the air filter to the MAF sensor tube and you are breathing more air and producing more power.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube For Maximum Air Flow
• Increased Horsepower And Torque
• Improved Throttle Response

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube For Maximum Air Flow
• Improved Throttle Response
• 2 Year Limited Warranty

Maximum performance within minutes is what this aFe Stage 1 cold air intake system delivers. Enclosed in a durable 16 gauge heat shield; a massive washable/reusable; 360 deg. conical Pro 5R air filter increases airflow resulting in an additional 6 hp; and 7 lbs./ft/ torque. This intake system also features a unique 3-angle adaptor for increased air velocity. The Pro 5R air filter is constructed with 100 percent polyurethane for long life and multiple cleaning cycles. This intake is the easiest intake on the market to install. Simply remove the factory intake and mount the 3-angle adaptor with the air filter to the MAF sensor tube and you are breathing more air and producing more power.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube
• 76% cfm Flow Gain
• Improved Throttle Response

Maximum performance within minutes is what this aFe Stage 1 cold air intake system delivers. Enclosed in a durable 16 gauge heat shield; a massive washable/reusable; 360 deg. conical Pro 5R air filter increases airflow resulting in an additional 6 hp; and 7 lbs./ft/ torque. This intake system also features a unique 3-angle adaptor for increased air velocity. The Pro 5R air filter is constructed with 100 percent polyurethane for long life and multiple cleaning cycles. This intake is the easiest intake on the market to install. Simply remove the factory intake and mount the 3-angle adaptor with the air filter to the MAF sensor tube and you are breathing more air and producing more power.

Product Features:

• Uses Pro DRY S Air Filter For Maximum Convenience
• Rotomolded Plastic Tube For Maximum Air Flow
• 65% cfm Flow Gain
• Improved Throttle Response

Maximum performance within minutes is what this aFe Stage 1 cold air intake system delivers. Enclosed in a durable 16 gauge heat shield; a massive washable/reusable; 360 deg. conical Pro 5R air filter increases airflow resulting in an additional 6 hp; and 7 lbs./ft/ torque. This intake system also features a unique 3-angle adaptor for increased air velocity. The Pro 5R air filter is constructed with 100 percent polyurethane for long life and multiple cleaning cycles. This intake is the easiest intake on the market to install. Simply remove the factory intake and mount the 3-angle adaptor with the air filter to the MAF sensor tube and you are breathing more air and producing more power.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube
• 71% cfm Flow Gain
• Improved Throttle Response