2003 BMW 745i Cooling and Climate Controls

Essential 2003 BMW 745i Cooling and Climate Controls

Mahle – AT Oil Cooler Thermo (Part No.J2041406131MAH)

AT Oil Cooler Thermo

from

$139.32
AT Oil Cooler Thermo

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1384)

HVAC Blower Motor Resistor

from

$183.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

APA/URO Parts – Water Pump Pulley (Part No.G3020278027APA)

Water Pump Pulley

from

$47.53
Water Pump Pulley

KAI – A/C System Seal Kit (Part No.FTT010073)

A/C System Seal Kit

from

$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine

Product Features:
  • MT2640, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6567)

A/C Condenser and Receiver Drier Assembly

from

$245.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Carquest Premium – Heater Core (Part No.910632)

Heater Core

from

$76.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Carquest Premium – Radiator (Part No.412826)

Radiator

from

$483.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Dorman – Radiator Fan Assembly: Single, With Controller, Cost Effective And Reliable (Part No.621-190)

Radiator Fan Assembly: Single, With Controller, Cost Effective And Reliable

from

$772.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Flex A Lite – Black Magic Electric Fan (Part No.180)

Black Magic Electric Fan

from

$367.99
Black Magic Electric Fan

Geba – Geba Water Pump (Part No.G3000305755GEB)

Geba Water Pump

from

$187.47
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High quality cast aluminum.
  • Advanced bearing design for high axial and radial stresses.
  • Unitized sealing technology that ensures optimal leak tightness and longevity.
  • Optimum cooling performance and longevity.
See More

Carquest Premium – A/C New; w/ Clutch; w/ 7SEU16C Compressor (Part No.T98358)

A/C New; w/ Clutch; w/ 7SEU16C Compressor

from

$479.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26826)

Cap and Valve A/C System Seal Kit

from

$19.99
All the seals needed to complete the job; Compatible with both R134a And R12 refrigerants; Application specific; SUV And rear air applications
See More

Bosch – Heater Valve (Part No.R3020313597BOS)

Heater Valve

from

$192.36
Heater Valve

Carquest Premium – Engine Coolant Integrated Thermostat Housing (Part No.85956)

Engine Coolant Integrated Thermostat Housing

from

$85.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring  to ensure proper seal (where applicable
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • All-in-one bolt on solution for a complete repair
  • Includes quality thermostat
See More

Carquest Premium – Universal Standard Rotation Thermal Standard Duty Fan Clutch (Part No.215051)

Universal Standard Rotation Thermal Standard Duty Fan Clutch

from

$243.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Dorman – A/C Condenser Fan Assembly: Cost Effective And Reliable (Part No.621-210)

A/C Condenser Fan Assembly: Cost Effective And Reliable

from

$588.99
This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.

Product Features:
  • Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – components are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – Blower Motor: With Wheel (Part No.75033)

Blower Motor: With Wheel

from

$188.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

US MOTOR WORKS – Water Pump with Fan Clutch (Part No.MCK1051)

Water Pump with Fan Clutch

from

$319.99
US Motor Works Professional Series Water Pump with Fan Clutch are designed to replace the mechanical components of a cooling system. A proper water pump replacement should include a new fan clutch as the two are connected to the same shaft and work together to move the air and cooling fluid. Replacing one without the other can damage the new part and cause repeat work or engine trouble. This matched set will allow your vehicle continued operation in the demanding environment of today’s engine. All components are brand new and QA inspected for perfect fit and function. Restore your cooling power by installing a US Motor Works Professional Series Water Pump with Fan Clutch.

Product Features:
  • Fan clutch mounts to the water pump and should be replaced at the same time.
  • Matched set for proper water pump or fan clutch replacement
  • Includes mounting hardware, gaskets and accessories as required.
  • Complete mechanical cooling parts replacement
  • Factory tested and 100% new product
  • Meets or exceeds OEM quality
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10270)

Engine Coolant Temperature Sensor

from

$25.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Behr – Expansion Tank Cap (Part No.G1040458946BEH)

Expansion Tank Cap

from

$23.33
The Behr Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2575)

ABS Wheel Speed Sensor

from

$126.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.606-221)

Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees

from

$84.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

KAI – A/C Receiver Drier (Part No.ARD010145)

A/C Receiver Drier

from

$34.99
New Standard Replacement A/C Receiver Drier

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Desiccant Cartridge Kit (Part No.T83057)

A/C Desiccant Cartridge Kit

from

$52.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

2003 BMW 745i Cooling and Climate Controls

You count on your 2003 BMW 745i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 92 Cooling and Climate Controls ranging in price from $1.78 to $759.74, you’re sure to find everything you need for your 2003 BMW 745i.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 33 different brands like Permatex, Imperial, and Carquest Premium. 2003 BMW 745i Cooling and Climate Controls start as low as $1.78!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 508 extensive product reviews on 2003 BMW 745i Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 30 PSI with 4.1 stars and Thermostatic Fan Control – Preset with 3.0 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2003 BMW 745i below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2003 BMW 745i

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 BMW 745i running right for years to come. In our inventory you’ll find brands like Permatex, Imperial, Carquest Premium, and even more.

Popular Driveworks Water Pumps Cooling and Climate Controls

You’ll find popular Driveworks Water Pumps brand products across Engine Cooling Parts. All are waiting to get your 2003 BMW 745i back on the road. Some of the top-rated Driveworks Water Pumps products in these categories are:
Water Pump: New, Installation Gasket Included
from $151.99
(1)
Water Pump: New, Installation Gasket Included
Water Pumps

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2003 BMW 745i, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2003 BMW 745i Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2003 BMW 745i?

Out of 92 Cooling and Climate Controls for the 2003 BMW 745i, the most popular in our inventory are:
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers
Electric Fan - 14" Diameter
from $99.99
(14)
Electric Fan – 14" Diameter
Engine Cooling Fans

What are the top-rated 2003 BMW 745i Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2003 BMW 745i based on customer reviews/ratings are:
Radiator Cap: 30 PSI
from $23.99
(14)
Radiator Cap: 30 PSI
“Fit my 2004 BMW 330xi. Came as described.”
Thermostatic Fan Control - Preset
from $38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
Thermostat Housing Seal
from $3.49
(3)
Thermostat Housing Seal
“Part installed easily and fit/functions well. No more noise from the front end.”