2003 BMW 325i Air Conditioning Parts

Essential 2003 BMW 325i Air Conditioning Parts

ATE – ATE ABS Speed Sensor (Part No.N6030569481ATE)

ATE ABS Speed Sensor

from

$88.26
The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Four Seasons – A/C Compressor w/ Clutch, Remanufactured (Part No.R100030168AIR)

A/C Compressor w/ Clutch, Remanufactured

from

$506.68
4-Seasons provides a remanufactured A/C Compressor that is the same quality fit and performance of the OE compressor it replaces.

Product Features:
  • OE-Equivalent and Direct fit Application
  • Brand new with no remanufactured parts
  • Quieter than current OE units
  • Endurance tested equivalent to 50,000 miles
  • Fleet tested under strenuous condition
See More

KAI – A/C Condenser (Part No.CNDDPI3443)

A/C Condenser

from

$92.99
New Platinum Pro A/C Condenser, 06-12 3 Series Without Turbo, All Z4 Models, X1 2.0L L4, 128I Coupe/Convertible, 08-09 135I Convertible Only

Product Features:
  • 06-12 3 Series Without Turbo, All Z4 Models, X1 2.0L L4, 128I Coupe/Convertible, 08-09 135I Convertible Only, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rein – A/C Evaporator (Part No.ACE0056R)

A/C Evaporator

from

$209.99
Rein OE Quality Air Conditioning Evaporator. Pressure tested before leaving the factory. Designed according to OE specifications, ensuring fit and function are identical to the original evaporator.
See More

KAI – A/C System Seal Kit (Part No.FTT010073)

A/C System Seal Kit

from

$18.99
New Standard Replacement A/C System Seal Kit, MT2640, L4 Engine

Product Features:
  • MT2640, L4 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-901)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$129.99
This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.

Product Features:
  • Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – components are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – A/C Liquid Line Hose Assembly w/o Orifice Tube (Part No.T56196)

A/C Liquid Line Hose Assembly w/o Orifice Tube

from

$47.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

ACM – A/C Evaporator Temperature Sensor (Part No.R1071273277ACM)

A/C Evaporator Temperature Sensor

from

$33.52
ACM is a supplier of Original Equipment quality climate control products. Heater / Evaporator Temperature Sensor
See More

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

A/C Compressor Relay Connector

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26784)

Cap & Valve A/C System Seal Kit

from

$54.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26826)

Cap and Valve A/C System Seal Kit

from

$19.99
All the seals needed to complete the job; Compatible with both R134a And R12 refrigerants; Application specific; SUV And rear air applications
See More

ACM – A/C Expansion Valve (Part No.R1045230190ACM)

A/C Expansion Valve

from

$48.53
The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meet or exceed OEM specifications.
  • Utilizes the factory style fittings and connectors
  • Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.
See More

ACM – A/C Expansion Valve (Part No.R1045325819ACM)

A/C Expansion Valve

from

$54.11
The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meet or exceed OEM specifications.
  • Utilizes the factory style fittings and connectors
  • Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.
See More

Carquest Premium – AC Pressure Switch (Part No.ACA1677)

AC Pressure Switch

from

$69.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compresso

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
  • All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
  • All units are tested using automated end-of-line testing equipment pressurizing the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging.
See More

Santech – A/C Pressure Switch (Part No.R1054178181SII)

A/C Pressure Switch

from

$18.17
A/C Pressure Switch

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56802)

A/C Discharge Line Hose Assembly

from

$37.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55375)

A/C Discharge Line Hose Assembly

from

$117.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55840)

A/C Suction Line Hose Assembly

from

$66.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56800)

A/C Suction Line Hose Assembly

from

$165.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Behr – A/C Receiver Drier (Part No.R104056891BEH)

A/C Receiver Drier

from

$86.80
The Behr A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meets or exceeds the vehicle manufacturer specifications.
  • Utilizes factory style fittings and connectors.
  • Includes the required o-rings and associated hardware
See More

KAI – A/C Receiver Drier (Part No.ACM010165)

A/C Receiver Drier

from

$52.99
New Standard Replacement A/C Receiver Drier

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Filter Drier (Part No.T33444)

A/C Filter Drier

from

$23.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

DENSO – New Compressor With Clutch (Part No.471-1114)

New Compressor With Clutch

from

$339.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

DENSO – New Compressor With Clutch (Part No.471-1119)

New Compressor With Clutch

from

$413.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

DENSO – New Compressor With Clutch (Part No.471-1528)

New Compressor With Clutch

from

$459.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Vaico – A/C Hose (Part No.R1020299847VCO)

A/C Hose

from

$188.17
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

2003 BMW 325i Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 2003 BMW 325i. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 34 different Air Conditioning Parts in our inventory ranging from $18.99 to $459.99. That means you can find the exact parts or products you need to keep that 2003 BMW 325i running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 2003 BMW 325i. Carquest Premium, Factory Air, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 2003 BMW 325i, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2003 BMW 325i rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 2003 BMW 325i Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 BMW 325i demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 325i the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular ACM Air Conditioning Parts

We carry ACM parts in our stock across AC Thermal Evaporator Switches categories, plus more. For a 2003 BMW 325i, our most popular ACM Air Conditioning Parts include:
A/C Evaporator Temperature Sensor
from $33.52
(1)
A/C Evaporator Temperature Sensor
AC Thermal Evaporator Switches

Top 2003 BMW 325i Air Conditioning Parts from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Air Conditioning Parts for your 2003 BMW 325i. Popular Carquest Premium parts include:
A/C Filter Drier w/ Pad Mount
from $45.99
(1)
A/C Filter Drier w/ Pad Mount
Accumulator and Receiver Driers
A/C New; w/ Clutch; w/ 7SB16C Compressor
from $371.99
(1)
A/C New; w/ Clutch; w/ 7SB16C Compressor
AC Compressor Without Clutch

FAQs for 2003 BMW 325i Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 2003 BMW 325i?

Out of 34 Air Conditioning Parts for the 2003 BMW 325i, the most popular in our inventory are:
Cap and Valve A/C System Seal Kit
from $19.99
This product is not rated
Cap and Valve A/C System Seal Kit
AC Caps and Valve Core Kits
Cap & Valve A/C System Seal Kit
from $54.99
This product is not rated
Cap & Valve A/C System Seal Kit
AC Caps and Valve Core Kits
A/C Compressor Relay Connector
from $44.99
This product is not rated
A/C Compressor Relay Connector
AC Compressor Cut-Out Relay Harness Connectors