2003 Acura CL Air Conditioning Parts

Essential 2003 Acura CL Air Conditioning Parts

DENSO – First Time Fit A/C Conr (Part No.R1030688005ND)

First Time Fit A/C Conr

from

$121.89
Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.

Product Features:
  • Zinc diffusion layer improves corrosion resistance
  • Unique fin design to minimize airflow blockage
  • High performance design reduces the required compressor power
  • System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
  • Engineered to Perfection: OE quality engineered for unparalleled performance
  • Exact Fit: Condensers install with speed and ease
  • Reduces required compressor power, resulting improved fuel economy
  • Restores A/C performance to as-new condition
  • First Time Fit® assures bolt-in replacement; no brackets or adapters
  • Greater Durability: Pure aluminum construction provides greater resistance for corrosion
See More

Santech – HVAC Binary Switch (Part No.R21351989513SII)

HVAC Binary Switch

from

$65.26
HVAC Binary Switch

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26815)

O-Ring & Gasket A/C System Seal Kit

from

$14.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R134a and R12 refrigerants
  • Application specific
  • SUV and rear air applications
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55276)

A/C Suction Line Hose Assembly

from

$70.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

DENSO – Relay (Part No.567-0055)

Relay

from

$34.49
DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.
See More

Carquest – A/C Condenser Fan Motor Relay (Part No.R3109)

A/C Condenser Fan Motor Relay

from

$18.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
  • A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
  • Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
  • The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54900)

A/C Plate and Fin Evaporator

from

$99.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

KAI – A/C Evaporator Core (Part No.EVA010255)

A/C Evaporator Core

from

$154.99
New Standard Replacement A/C Evaporator Core

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Delphi – ABS Wheel Speed Sensor (Part No.SS11598)

ABS Wheel Speed Sensor

from

$55.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARE1279)

ABS Wheel Speed Sensor

from

$35.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Factory Air – System Mounted Binary Pressure Switch (Part No.35993)

System Mounted Binary Pressure Switch

from

$43.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

KAI – A/C Expansion Valve (Part No.ACX010983)

A/C Expansion Valve

from

$36.99
New Standard Replacement A/C Expansion Valve

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T39000)

A/C TXV O-Ring Expansion Valve

from

$34.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Precision machined ports
See More

Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW57305)

Reman Nippondenso 10PA17C Compressor w/ Clutch

from

$209.99
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality stAndards in the Re-manufacturing process
See More

Carquest Premium – A/C New; w/o Clutch; w/ 10PA17C Compressor (Part No.T58362)

A/C New; w/o Clutch; w/ 10PA17C Compressor

from

$367.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Cap & Valve A/C System Seal Kit

from

$17.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

KAI – A/C Service Valve (Part No.FTT010751)

A/C Service Valve

from

$9.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:
  • MT2909
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C Receiver Drier (Part No.ACM010003)

A/C Receiver Drier

from

$17.99
New Standard Replacement A/C Receiver Drier

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Filter Drier (Part No.T33574)

A/C Filter Drier

from

$12.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Four Seasons – A/C Pressure Switch (Part No.R1054178502AIR)

A/C Pressure Switch

from

$56.58
A/C Pressure Switch

KAI – A/C System Seal Kit (Part No.FTT010696)

A/C System Seal Kit

from

$11.99
New Standard Replacement A/C System Seal Kit

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C System Seal Kit (Part No.FTT010045)

A/C System Seal Kit

from

$14.99
New Standard Replacement A/C System Seal Kit, MT2560, L3 Engine

Product Features:
  • MT2560, L3 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

DENSO – New Compressor With Clutch (Part No.471-1256)

New Compressor With Clutch

from

$384.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Carquest Premium – New Compressor with Clutch (Part No.T58305)

New Compressor with Clutch

from

$309.99
CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

Product Features:
  • New, with Clutch, with 10PA17C Compressor
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – AC CMPR NEW W/CLUTCH (Part No.78383)

AC CMPR NEW W/CLUTCH

from

$298.99
AC CMPR NEW W/CLUTCH

DENSO – New Compressor With Clutch (Part No.471-1188)

New Compressor With Clutch

from

$372.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Carquest Premium – New Compressor with Clutch (Part No.T78383)

New Compressor with Clutch

from

$343.99
CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

Product Features:
  • New, with Clutch, with 10S17C Compressor
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

DENSO – New Compressor With Clutch (Part No.471-1190)

New Compressor With Clutch

from

$327.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

2003 Acura CL Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 2003 Acura CL. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 26 different Air Conditioning Parts in our inventory ranging from $9.99 to $384.99. That means you can find the exact parts or products you need to keep that 2003 Acura CL running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 2003 Acura CL. Factory Air, Carquest Premium, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 2003 Acura CL, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2003 Acura CL rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 2003 Acura CL Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 Acura CL demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your CL the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Four Seasons Air Conditioning Parts

We carry Four Seasons parts in our stock across AC Compressor Pressure Switches categories, plus more. For a 2003 Acura CL, our most popular Four Seasons Air Conditioning Parts include:
A/C Pressure Switch
from $56.58
(2)
A/C Pressure Switch
AC Compressor Pressure Switches

FAQs for 2003 Acura CL Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 2003 Acura CL?

Out of 26 Air Conditioning Parts for the 2003 Acura CL, the most popular in our inventory are:
A/C Filter Drier w/ Pad Mount
from $27.49
(8)
A/C Filter Drier w/ Pad Mount
Accumulator and Receiver Driers
A/C Service Valve
from $9.99
This product is not rated
A/C Service Valve
AC Caps and Valve Core Kits
A/C System Seal Kit
from $11.99
This product is not rated
A/C System Seal Kit
AC System Seal Kits