2002 Volkswagen Jetta Suspension Parts
More 2002 Volkswagen Jetta Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2002 Volkswagen Jetta, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2002 Volkswagen Jetta Suspension Parts
Carquest Premium – Multi Purpose Relay (Part No.RAA1245)
from
$10.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Monroe – OESpectrum Strut (Part No.72312)
from
$141.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
APA/URO Parts – Spring Seat (Part No.L5005946811APA)
from
$21.91
The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Rein – Strut Mount Kit (Part No.AVQ0016P)
from
$24.99
Strut Mount Kit
Monroe – OESpectrum Strut (Part No.71265)
from
$71.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
Monroe – Strut-Mate Shock Mounting Kit (Part No.904910)
from
$43.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Dorman – Suspension Control Arm (Part No.521-547)
from
$99.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dansk – Strut Mount Stop (Part No.L3025946771DSK)
from
$6.27
Strut Mount Stop
Lesjofors – Lesjofors Coil Spring (Part No.L5000687570LES)
from
$140.71
Lesjofors produce the world’s largest range of automotive Coil springs, covering more than 10,000 standard and heavy duty applications. Manufactured in Sweden using modern, state of the art production methods, Lesjofors maintain 100% quality control over every spring in the range.
Product Features:
See More
Product Features:
- Superior grade spring steel
- State of the art computer controlled machines
- Advanced Zinc Phosphate and Epoxy Powder Paint surface treatment
- Supplier of matching quality parts according to BER1400/2002
Rein – Strut Mount (Part No.AVQ0347R)
from
$21.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
KYB – Jounce Bumper and Bellows (Part No.SB113)
from
$24.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Febi – Hydraulic Fluid ZH-M (yellow) – 1 Liter (Part No.L707097881FEB)
from
$17.87
Type: 02615 Applications: For load leveling suspension, hydropneumatic suspension, hydraulic soft top, 4 Matic and ASD (Adaptive Damping System) Specifications: Meets ZHM Fluid Specifications OEM Approvals: MB 343.0 Volume: 1 Liter Febi 02615 mineral-based hydraulic fluid was developed for use in level control systems and central hydraulic systems of vehicles.
Product Features:
See More
Product Features:
- Ensures excellent protection against oxidation and ageing due to a selected combination of additives.
- Is used when mineral oil based hydraulic media are recommended because of the operating conditions.
Dorman – Suspension Trailing Arm Bushing (Part No.905-900)
from
$36.49
This axle support bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
INA – Strut Bearing (Part No.L303556853INA)
from
$9.23
INA Strut Bearings are made of high-quality OE materials for long life. They help improve strut assembly operation by increasing damping and restoring smooth steering ability.
Product Features:
See More
Product Features:
- Reduces suspension, road noises and vibrations
- Mount bearings provide smoother steering and help retain front end alignment
- Are built with design and quality that matches or exceeds OE quality
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172311)
from
$218.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
Rein – Suspension Protection Boot (Part No.SCB0362)
from
$24.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
Product Features:
See More
Product Features:
- Produced with high quality materials to ensure maximum life and a smooth ride.
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Part has a high corrosion resistance for maximum life.
- Matches original equipment design specifications.
MOOG – Strut Bellows (Part No.K90461)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
MOOG – Coil Spring Set (Part No.81134)
from
$58.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
DC Sports – Front Carbon Steel Strut Bar – Fits 01-03 Golf/Jetta 1.8T (Part No.CSB1601)
from
$168.89
Single or Dual bar design with integrated steel brace virtually eliminates body flex for improved handling and drivability. Solid one piece design for maximum rigidity. Reduces chassis flex and improves torsion stiffness. Improves vehicle handling and drivability characteristics. Mounts directly to strut tower with little or no modifications required. Includes comprehensive instructions and all necessary hardware. Titanium grey powder coating delivers lasting good looks. Available for upper front and or rear.
Product Features:
See More
Product Features:
- CS-2 dual bar design
- Mounts directly with no modifications required
- Includes instructions and all necessary hardware
- Titanium-look grey powder coat delivers lasting good looks
- Stiffens chassis and improves vehicle handling
- Maximum rigidity to increase vehicle handling
Febi – Coil Spring (Part No.L5000655190FEB)
from
$74.26
Coil Spring
Monroe – Strut-Mate Coil Spring Insulator (Part No.905963)
from
$24.99
Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include*: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat. (*as applicable by OE design)
Product Features:
See More
Product Features:
- Replacing all your warn strut components ensures a complete repair
- High-Quality premium strut components
- Engineered for superior fit and performance
- Monroe Strut-Mate mounting kits* include: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
Energy Suspension – Coil Spring Isolator Set (Part No.15.6104G)
from
$20.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Lasts from 3 to 10 Times Longer
- Assemble to Chassis Same Way as OEM
- Maintains Factory Ride Characteristics
- Simple Way to Increase Vehicle Height
Whiteline – Control Arm Lower Rear Outer Bushing (Part No.W63554)
from
$31.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
MOOG – Control Arm Bushing (Part No.K201630)
from
$39.99
Backed by superior materials and rigorous testing, MOOG Problem Solver vertical control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- SMOOTH ROTATION — Exclusive ball and socket design allows for smooth rotational movement
- EASY TO INSTALL — Design saves time during installation by aligning the bushing sleeve to insert the bolt
- LOW MAINTENANCE — Bushing assembly is permanently lubricated and sealed with premium MOOG boot helps prevent contamination
- PREMIUM MATERIALS — Made from high-quality polymer and steel compounds for durability and ride performance
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Easier to install and lasts longer than typical OE designs
MTC – Strut Bump Stop (Part No.L303666812MTC)
from
$7.45
MTC’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
APA/URO Parts – Strut Bump Stop (Part No.L3036230072APA)
from
$7.27
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
MOOG – Strut Mount (Part No.K9583)
from
$75.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE requirements
- Superior rubber to steel bonding for durability
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Includes new spring seat insulator and installation hardware to eliminate noise issues
- Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
Monroe – Strut-Mate Strut Mounting Kit (Part No.902906)
from
$75.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Popular 2002 Volkswagen Jetta Suspension Parts Categories
2002 Volkswagen Jetta Suspension Parts
You count on your 2002 Volkswagen Jetta to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 76 Suspension Parts ranging in price from $1.41 to $315.99, you’re sure to find everything you need for your 2002 Volkswagen Jetta.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 27 different brands like Monroe, Moog, and KYB. 2002 Volkswagen Jetta Suspension Parts start as low as $1.41!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,480 extensive product reviews on 2002 Volkswagen Jetta Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut-Mate Strut Boot Kit with 2.6 stars and Gas-Matic Strut with 4.6 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2002 Volkswagen Jetta below to get started!
Top-Rated Suspension Parts Brands For Your 2002 Volkswagen Jetta
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Volkswagen Jetta running right for years to come. In our inventory you’ll find brands like Monroe, Moog, KYB, and even more.
Popular KYB Suspension Parts
You’ll find popular KYB brand products across Shocks and Struts. All are waiting to get your 2002 Volkswagen Jetta back on the road. Some of the top-rated KYB products in these categories are:
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 2002 Volkswagen Jetta, and some of our most reviewed Monroe parts include:
FAQs for 2002 Volkswagen Jetta Suspension Parts
What are the most purchased Suspension Parts for the 2002 Volkswagen Jetta?
Out of 76 Suspension Parts for the 2002 Volkswagen Jetta, the most popular in our inventory are:
from
$128.99
(7)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Suspension Strut and Coil Spring Assemblies
What are the top-rated 2002 Volkswagen Jetta Suspension Parts?
Top-rated Suspension Parts for your 2002 Volkswagen Jetta based on customer reviews/ratings are:
from
$37.49
(9)
Strut-Mate Strut Boot Kit
“The boot snd bumper fit perfectly knto the upper strut mount on my 2011 f150, although they dont fit under the upper rubber for the spring like OEM th”
from
$43.99
(7)
Strut-Mate Strut Mounting Kit
“Excellent OEM replacement parts on daughter’s 2001 Beetle. Brake line tabs and speed sensor mounts are correctly located.
Easy half day project tha”
