2002 Pontiac Montana Engine Cooling Parts

Essential 2002 Pontiac Montana Engine Cooling Parts

Motorad – Thermostat Kit: Includes Inlet, Thermostat and Seal, 185 Degrees (Part No.6133KT)

Thermostat Kit: Includes Inlet, Thermostat and Seal, 185 Degrees

from

$115.99
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1172)

Engine Water Pump: New, Gasket/Seals Included

from

$42.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10076)

Engine Coolant Temperature Sensor

from

$50.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Dorman – Engine Water Pump Pulley (Part No.300-933)

Engine Water Pump Pulley

from

$46.99
Damaged your engine water pump pulley? This pulley is a direct replacement for the original manufacturer’s part on specific vehicle years, makes and models, restoring proper performance.

Product Features:
  • Direct replacement – this engine water pump pulley matches the fit and function of the original part on specific vehicles.
  • Durable design – built to withstand the elements and road debris.
  • Thoroughly tested – must pass strict standards to ensure reliable longevity
  • Trustworthy quality – backed by team of engineers and inspectors in United States
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Dorman – Coolant Air Bleeder Screw (Part No.902-112)

Coolant Air Bleeder Screw

from

$16.99
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw.
  • Durable materials – designed to withstand high cooling system temperatures and pressures.
  • Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.621-382)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$217.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Dorman – Water Pump Mounting Hardware Kit (Part No.902-806)

Water Pump Mounting Hardware Kit

from

$16.29
This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

FELPRO – Water Pump Gasket (Part No.G3040976426FEL)

Water Pump Gasket

from

$5.13
Water Pump Gasket

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1092)

Air Charge Temperature Sensor Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Standard Thermostat: With Seal, 185 Degrees (Part No.48808)

Standard Thermostat: With Seal, 185 Degrees

from

$25.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Koyo Cooling – Radiator (Part No.G1000378950KCS)

Radiator

from

$157.53
Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:
  • All Aluminum Core and Plastic Tank
  • OE Style mounting brackets and hose connections
  • Integrated transmission oil cooler when applicable
  • Compact and lightweight
See More

Carquest Premium – Radiator Cap: 15 PSI (Part No.10248)

Radiator Cap: 15 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Mahle – Water Outlet Gasket (Part No.G3045348795MAH)

Water Outlet Gasket

from

$21.45
Water Outlet Gasket

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

ACDelco – Relay (Part No.P2020848844ACD)

Relay

from

$17.92
Relay

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Thermostatic Fan Control - Preset

from

$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Preset thermostatic fan control
  • 185°F preset
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

ACDelco – GM Original Equipment Radiator Cap (Part No.G1010309038ACD)

GM Original Equipment Radiator Cap

from

$21.09
An ACDelco GM Original Equipment Radiator Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.

Product Features:
  • Seal and maintain pressure on the cooling system for vehicle safety
  • Raise the boiling point of the engine coolant to maintain efficiency
  • Fit most models of GM vehicles for expanded coverage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Coolant Housing/Water Outlet (Part No.85166)

Coolant Housing/Water Outlet

from

$23.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Direct-fit replacement for ease of installation
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
See More

NTK – Engine Coolant Level Sensor (Part No.EE0017)

Engine Coolant Level Sensor

from

$59.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Engine Coolant Level Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of the vehicle’s coolant levels.
  • The Coolant Level Sensor is responsible for measuring the coolant level of the vehicle’s engine and provides warning if coolant levels become dangerously low.
See More

Carquest Premium – Engine Coolant Level Sensor (Part No.SBA3661)

Engine Coolant Level Sensor

from

$55.99
The engine cooling system is critical to engine sustainability under all operating conditions. The Coolant Level Sensor reports the level of coolant either in the radiator overflow container or in the radiator tank.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Dorman – Panel Trim Retainer – Interior – GM (Part No.45814)

Panel Trim Retainer - Interior - GM

from

$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – GM Bumper Retainer (Part No.961-060D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Felpro – Engine Water Pump Gasket (Part No.35814)

Engine Water Pump Gasket

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Felpro – Engine Water Pump Gasket (Part No.35403)

Engine Water Pump Gasket

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

2002 Pontiac Montana Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2002 Pontiac Montana. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 54 different Engine Cooling Parts in our inventory ranging from $1.55 to $234.99. That means you can find the exact parts or products you need to keep that 2002 Pontiac Montana running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 2002 Pontiac Montana. Permatex, Carquest Premium, and Imperial are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2002 Pontiac Montana, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,359 reviews in this category, some of the top rated parts include 2 Pole Radiator Fan Motor with 4.4 stars and Coolant Temp Sensor Switch with 4.6 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2002 Pontiac Montana rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2002 Pontiac Montana Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2002 Pontiac Montana demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Montana the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular ACDelco Engine Cooling Parts

We carry ACDelco parts in our stock across Water Pumps categories, plus more. For a 2002 Pontiac Montana, our most popular ACDelco Engine Cooling Parts include:
Water Pump Kit
from $52.99
(1)
Water Pump Kit
Water Pumps

FAQs for 2002 Pontiac Montana Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2002 Pontiac Montana?

Out of 54 Engine Cooling Parts for the 2002 Pontiac Montana, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Radiator Cap: 16 PSI
from $16.79
(91)
Radiator Cap: 16 PSI
Radiator Caps
THERMOSTAT GASKET
from $5.29
(49)
THERMOSTAT GASKET
Thermostat and Water Outlet Gaskets

What are the top-rated 2002 Pontiac Montana Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2002 Pontiac Montana based on customer reviews/ratings are:
2 Pole Radiator Fan Motor
from $34.99
(60)
2 Pole Radiator Fan Motor
“Installed Easially, Works Great!”
Coolant Temp Sensor Switch
from $24.05
(56)
Coolant Temp Sensor Switch
“Very good replacement part.”
Engine Water Pump Gasket
from $4.49
(38)
Engine Water Pump Gasket
“Best water pump gasket”