2002 Pontiac Montana Air Intakes
Find Your Specific 2002 Pontiac Montana Air Intakes
Below you will find various in-demand Pontiac Air Intakes, components and accessories for your 2002 Montana. Advance Auto Parts has popular Montana parts like Airboxes, Throttle Bodies & Carb Parts, Intake Manifold Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Montana model years including
1999,
2000,
2001,
2003,
2004,
2005,
2006 and more. Select a category of 2002 Pontiac Montana Air Intakes below and start saving instantly.
Popular 2002 Pontiac Montana Air Intakes Categories
Essential Air Intakes for 2002 Pontiac Montanas
Dorman – Lower & Upper Intake Manifold Gasket Set: 6 Piece Set (Part No.615-725)
from
$76.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98003 T)
from
$100.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98015 T)
from
$152.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
NTK – Throttle Position Sensor (Part No.TH0045)
from
$61.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.
Product Features:
See More
Product Features:
- OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
ACDelco – Throttle Position Sensor (Part No.213-4668)
from
$73.99
ACDelco Professional Throttle Position Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Throttle Position Sensor (Part No.ECC1004)
from
$46.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)
from
$30.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest – Air Charge Temperature Sensor (Part No.31A1016)
from
$28.99
The Air Charge Temperature Sensor provides an input to the vehicles computer as to the temperature of the air entering the engine via the air cleaner assembly. The engine computer uses this input to control many operating conditions which in turn provides optimal engine operation, engine performance and clean tailpipe emissions.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72226)
from
$37.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Premium quality parts
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
Idemitsu – Type TLS Automatic Transmission Fluid, 1 Quart (Part No.30040093-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Rivet-Push In-Hole Diameter .250 In. (Part No.799-110)
from
$5.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Bumper Retainer (Part No.961-364D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Help – Intake Manifold Bolt (Part No.03426)
from
$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Upgrade your 2002 Pontiac Montana with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 2002 Pontiac Montana, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Air Intakes are key to keeping your Montana functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Air Intakes for the 2002 Pontiac Montana, designed to meet your needs without breaking the bank.
From
Airbox
replacements to
Throttle Bodies & Carb Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2002 Pontiac Montana at great prices.
Our Air Intakes inventory for this model
ranges from just $1.99 to $141.99, with
an average price of $51.60.
Our 16 Air Intakes in stock come from 8 trusted brands, so you’re sure to find the right part for your 2002 Pontiac Montana without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Pontiac Montana, we stock popular OEM and aftermarket Air Intakes from top names
like FELPRO, Dorman, Delphi, and more.
FELPRO Air Intakes
start at just $37.99 and boast an impressive 4.6 stars average rating from customers.
Dorman and Delphi also bring quality to the table, with Air Intakes available starting at $5.99, and at an average 4.2 stars rating.
With 112 customer reviews and counting, our 2002 Pontiac Montana Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2002 Pontiac Montana is always ready to roll. We’re committed to providing you with everything you need to keep your Montana in top shape, all in one place.
Start shopping confidently below for your 2002 Pontiac Montana!
Best-Selling Airboxes for 2002 Pontiac Montanas
Enhance the driving experience in your Pontiac with 2 quality Airbox components, starting at $1.99.
Dorman – Rivet-Push In-Hole Diameter .250 In. (Part No.799-110)
from
$5.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Most Popular 2002 Pontiac Montana Throttle Bodies & Carb Parts
Customize your Pontiac with 5 Throttle Bodies & Carb Parts products
like Throttle Position Sensors, all
priced under $73.99.
Delphi – Throttle Position Sensor (Part No.SS10382)
from
$73.99
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
Product Features:
See More
Product Features:
- Delphi sensors are built to meet or exceed OE requirements and testing
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
- Designed digital output for maximum signal to noise ratio
Carquest Premium – Throttle Position Sensor (Part No.ECC1004)
from
$46.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
NTK – Throttle Position Sensor (Part No.TH0045)
from
$61.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.
Product Features:
See More
Product Features:
- OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
ACDelco – Throttle Position Sensor (Part No.213-4668)
from
$73.99
ACDelco Professional Throttle Position Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Throttle Position Sensor (TPS) (Part No.ECA1598)
from
$49.99
The engine control module (ECM) requires multiple sensor inputs to perform the needed system operations. The Throttle Position Sensor (TPS) provides the computer the needed input for exact throttle plate position for ignition timing, injection pulse width, transmission shift control along with several other system operations. Carquest Premium throttle position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured with high quality materials, industry-leading electronic components and strict quality controls
- Superior sealing protecting sensor from moisture and temperature extremes
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Top Picks for 2002 Pontiac Montana Intake Manifold Parts
Upgrade Pontiac Montanas with top-quality Intake Manifold Parts parts, including 9 OEM and aftermarket selections for your 2002 model.
Idemitsu – Type TLS Automatic Transmission Fluid, 1 Quart (Part No.30040093-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98003 T)
from
$100.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE – Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72226)
from
$37.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Premium quality parts
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90565)
from
$67.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Dorman – Upper Intake Manifold Gasket Set: 20 Piece Set (Part No.615-205)
from
$72.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
- Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Contents: Upper; Lower Manifold Gasket Set; Valve Cover Gaskets; 8 Intake Bolts With Thread Locker; 2 Heater Tube O Rings; Distributor O Ring; Egr Valve Gasket
Dorman – Help – Intake Manifold Bolt (Part No.03426)
from
$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Engine Intake Manifold Gasket Set (Part No.MIK 98003 T)
from
$141.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Problem-solving gaskets featuring advanced technologies
- Application specific design to ensure a perfect fit
- Exceeds original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Includes all parts needed to install the intake manifold
Carquest – Air Charge Temperature Sensor (Part No.31A1016)
from
$28.99
The Air Charge Temperature Sensor provides an input to the vehicles computer as to the temperature of the air entering the engine via the air cleaner assembly. The engine computer uses this input to control many operating conditions which in turn provides optimal engine operation, engine performance and clean tailpipe emissions.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)
from
$30.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Top-Rated Air Intakes Brands For Your 2002 Pontiac Montana
Shop for the best-rated brands offering Air Intakes and other products for your 2002 Pontiac Montanas. Below you’ll find some of our best rated Air Intakes from FELPRO, Dorman, and Delphi, and more. Air Intakes from these brands that fit a 2002 Montana start at just $5.99 and are rated as high as 4.6 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2002 Pontiac Montana Air Intakes
When it comes to maintaining or upgrading your 2002 Pontiac Montana, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 2002 Pontiac Montana. With over 3 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $37.99, with an average price of just $68.99. Plus, with over 95 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$100.99
(39)
Engine Intake Manifold Gasket Set
“The gaskets were well made better than factor. Took my time and had it done in a day.”
from
$37.99
(10)
Engine Intake Manifold Bolt Set
“Exact replacement. Just take your time and recheck the torque cause the thread sealer on the threads can give you a false reading the first time you s”
Popular Dorman 2002 Pontiac Montana Air Intakes
Dorman auto parts is one of the highest quality Air Intake brands in the market. Any 2002 Pontiac Montana owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2002 Montana, Advance Auto Parts carries a full inventory of 1 Dorman Air Intakes. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Dorman Air Intakes range up to $5.99, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.
from
$5.99
(1)
Rivet-Push In-Hole Diameter .250 In.
“work good . replace alot on older cars also this is packed 15.”
FAQs for 2002 Pontiac Montana Air Intakes
Which Air Intakes are best-sellers for 2002 Pontiac Montanas?
Out of 16 Air Intakes that fit 2002 Pontiac Montanas, the following parts are the top sellers:
- Throttle Position Sensor (12424551) – $46.99
- Type TLS Automatic Transmission Fluid, 1 Quart (11872369) – $14.49
- Throttle Position Sensor (12223009) – $61.99
What’s the price range for 2002 Pontiac Montana Air Intakes?
Air Intake prices for the 2002 Pontiac Montana start at $1.99 and go up to $141.99 for the most premium parts.
What’s the average price of a Air Intake for a 2002 Pontiac Montana?
The average price for Air Intakes for the 2002 Pontiac Montana is $51.60. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Pontiac Montana model years?
What are the cheapest Air Intakes for my 2002 Pontiac Montana?
The cheapest 2002 Pontiac Montana Air Intakes we carry in stock are:
- Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (9110071) – $1.99
- Rivet-Push In-Hole Diameter .250 In. (22144405) – $5.99
- Intake Manifold Bolt (11694391) – $14.29
- Type TLS Automatic Transmission Fluid, 1 Quart (11872369) – $14.49
- Air Charge Temperature Sensor (12550794) – $28.99
What are the top-rated Air Intakes that fit the 2002 Pontiac Montana?
Out of 112 reviews by customers, our 2002 Pontiac Montana Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2002 Pontiac Montana and their top-rated products:
- Airboxes
- Rivet-Push In-Hole Diameter .250 In. (22144405) – $5.99
- Intake Manifold Parts
- Rivet-Push In-Hole Diameter .250 In. (22144405) – $5.99
- Throttle Bodies & Carb Parts
- Rivet-Push In-Hole Diameter .250 In. (22144405) – $5.99
What types of Air Intakes do you sell for my 2002 Pontiac Montana?
As of 11/2/25, these are some of the most in-demand types of Air Intakes for a 2002 Pontiac Montana:
Can I get help with 2002 Pontiac Montana Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Air Intakes and more.
What is your return policy for Pontiac Montana Air Intakes?
Advance Auto Parts keeps returns simple. For new Pontiac Montana Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
