2002 Mercury Grand Marquis Valve Cover and Cylinder Heads
More 2002 Mercury Grand Marquis Valve Cover and Cylinder Heads
Find your specific 2002 Mercury Grand Marquis original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2002 Mercury Grand Marquis Valve Cover and Cylinder Heads
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1014)
from
$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Walker Products – Cyl. Head Temp Senso (Part No.A3035415005WKR)
from
$31.71
The Walker Cylinder Head Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0008)
from
$34.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford (Part No.7364)
from
$141.99
Product Features:
See More
- Head: 4.100″ Bore/0.045″ Thick/9.8cc Vol.
- Intake: 1.20″x2.00″ Port/.060″ Thick
- Exhaust: 1.25″x1.48″ Port
- 5/16″ Valve Cover
- Multi Piece Configuration
Felpro – Cylinder Head Gasket Set (Part No.HS 9280 PT-2)
from
$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket Set (Part No.HS 26482 PT)
from
$293.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Sealed Power – Engine Exhaust Valve (Part No.V-4603)
from
$16.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Intake Valve (Part No.V-3956)
from
$10.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Exhaust Valve (Part No.V-1961)
from
$8.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Edelbrock – RPM Small-Block Ford 2.02" Cylinder Head Hydraulic Roller Camshaft (Part No.60255)
from
$1035.99
The Edelbrock #60255 Performer RPM cylinder head is designed for use with 289-351W c.i.d. Small-Block Ford applications. The Edelbrock #60255 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-th
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller
- 60cc Combustion Chamber Volume
- 190cc Intake/60cc Exhaust Runner Volume
- 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – Small-Block Ford E-Street Cylinder Heads 1.90" (Part No.5023)
from
$1408.99
The Edelbrock #5023 E-Street cylinder heads are designed for Ford 289-351 W V8 applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for e
Product Features:
See More
Product Features:
- Complete Pair
- 60cc Combustion Chamber Volume
- 170cc Intake/60cc Exhaust Runner Volume
- 1.9 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Hydraulic Roller Camshaft (Part No.5027)
from
$1751.99
The Edelbrock #5027 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex
Product Features:
See More
Product Features:
- Complete Pair For Mechanical and Hydraulic Flat Tappet
- 60cc Combustion Chamber Volume
- 205cc Intake/62cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Sealed Power – Engine Rocker Arm Kit (Part No.R-879)
from
$18.79
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Pivot
- Stamped steel
- Bolt type mount
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Kit (Part No.R-855)
from
$8.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Pivot
- 1 Arm
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm (Part No.R-1096)
from
$20.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Valve Lifter (Part No.HT-2271)
from
$10.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-900)
from
$9.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Edelbrock – Hydraulic Roller Lifter Kit for Big-Block Ford. (Part No.97453)
from
$959.99
Product Features:
See More
- Precision Self-Aligning Hydraulic Roller Lifter
- Retro-Fit Lifter
- Use w/Hyd Roller Lifter In Non-Roller Engine Block
- Originally Equipped w/Conventional Lifters
Mahle – Cyl. Head Bolt Set (Part No.A3031566828MAH)
from
$68.99
Cyl. Head Bolt Set
Dorman – STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (sold by each) (Part No.675-131)
from
$3.99
Cylinder head bolt stripped or broken? This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – designed to match the fit and function of the original cylinder head bolt on certain vehicles
- Corrosion resistant – withstands elements for reliable service life
- Application specific – made to hold cylinder head in place on specific vehicles
- Trustworthy quality – backed by team of engineers and inspectors in United States
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8265 PT-1)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7313)
from
$61.99
Product Features:
See More
- Cylinder Head Gasket
- 1963-1996 289-302 (except boss)-351w; 1982-1996 5L
Mr. Gasket – Mls Head Gasket (Part No.3175G)
from
$110.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.
Product Features:
See More
Product Features:
- Gasket bore – 4.030 inch: Compressed thickness – .040 inch
- Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
- Optimized sealing embossments seals extreme cylinder pressure
- Provides excellent stability and reduces cylinder bore distortion.
- Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
- Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
- For high-performance street, drag race and oval track use
Mr. Gasket – Ultra Seal: Head Gasket (Part No.5807G)
from
$75.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.
Product Features:
See More
Product Features:
- Five layer (graphite core/perforated steel outer layers) composite construction
- Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
- Provides excellent stability, compressibility and high temperature endurance
- Coated with high temperature silicone to ensure sealing of engine fluids
- Will not brinell (indent) aluminum cylinder heads
- For high performance street, drag race and oval track use
- Compatible w/High Octane Fuel
- Compatible With Exotic Fuel
Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)
from
$107.99Product Features:
- Highest Quality Head Bolts
- Cold-Formed/Heat Treated
- Ensures Molecular Integrity
- Reduced Diameter Bolt Heads
- Hardened/Parallel-Ground Washers Included
- Rated At 170000 psi
- Manufactured By ARP
Edelbrock – Ford 429-460 Head Bolt Kit (Part No.8566)
from
$338.99
The Edelbrock #8566 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate t
See More
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71328)
from
$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Popular 2002 Mercury Grand Marquis Valve Cover and Cylinder Heads Categories
2002 Mercury Grand Marquis Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 2002 Mercury Grand Marquis. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 16 different Valve Cover and Cylinder Heads in our inventory ranging from $10.49 to $618.99. That means you can find the exact parts or products you need to keep that 2002 Mercury Grand Marquis running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2002 Mercury Grand Marquis. Sealed Power, Felpro, and NTK are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2002 Mercury Grand Marquis, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2002 Mercury Grand Marquis rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 2002 Mercury Grand Marquis Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2002 Mercury Grand Marquis demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Marquis the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Felpro Valve Cover and Cylinder Heads
We carry Felpro parts in our stock across Cylinder Head Gaskets categories, plus more. For a 2002 Mercury Grand Marquis, our most popular Felpro Valve Cover and Cylinder Heads include:
Top 2002 Mercury Grand Marquis Valve Cover and Cylinder Heads from Sealed Power
Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 2002 Mercury Grand Marquis. Popular Sealed Power parts include:
FAQs for 2002 Mercury Grand Marquis Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 2002 Mercury Grand Marquis?
Out of 16 Valve Cover and Cylinder Heads for the 2002 Mercury Grand Marquis, the most popular in our inventory are:
from
$34.99
This product is not rated
Engine Cylinder Head Temperature Sensor
Cylinder Head Temperature Sensors
from
$33.99
This product is not rated
Engine Cylinder Head Temperature Sensor
Cylinder Head Temperature Sensors
