2002 Mercedes-Benz C240 Steering and Chassis Parts
More 2002 Mercedes-Benz C240 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2002 Mercedes-Benz C240, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2002 Mercedes-Benz C240 Steering and Chassis Parts
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone New – Power Steering Pump (Part No.96-5321)
from
$183.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
ST Suspensions – Alignment Camber Kit (Part No.57422)
from
$26.99
Alignment Camber Kit
Whiteline – Sway Bar 22Mm Heavy Duty (Part No.BMR99)
from
$214.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Lemfoerder – Power Steering Reservoir (Part No.M2030188279LEM)
from
$38.99
Power Steering Reservoir
Cardone – Rack and Pinion Assembly (Part No.26-4005)
from
$395.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
CRP – P/S Hose O-Ring (Part No.M2019375706CRP)
from
$4.43
P/S Hose O-Ring
Meistersatz – P/S Reservoir Gasket (Part No.M2032168381MEI)
from
$5.70
P/S Reservoir Gasket
Febi – Steering Rack Boot Clamp (Part No.M1011755121FEB)
from
$3.48
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020426392FEB)
from
$110.32
With Hardware The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.
Product Features:
See More
Product Features:
- OE quality, fit and performance
- High quality rubber
- Reinforced with advanced materials
- Excellent vibration control
MOOG – Stabilizer Bar Bushing Kit (Part No.K201520)
from
$14.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Rein – Power Steering Pressure Hose Assembly (Part No.PSH0219)
from
$159.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.
Product Features:
See More
Product Features:
- Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
- Designed as direct-fit replacements to ensure trouble-free proper installation.
- Complete with hardware and seals when necessary for installation to save installation time and additional costs.
- Restores your vehicle to safe and optimal performance levels.
- Replacing both pressure and return hoses together ensures optimal performance and safety levels.
Whiteline – Sway Bar Link (Part No.KLC140-295)
from
$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Rein – Sway Bar Link (Part No.SCL0099R)
from
$24.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
APA/URO Parts – Steering Rack Bushing (Part No.M1063420057APA)
from
$12.85
Steering Rack Bushing
Rein – Steering Rack Mounts (Part No.AVB0385)
from
$8.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
See More
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010264974LEM)
from
$55.17
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Rein – Tie Rod End (Part No.SCE0105P)
from
$39.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Driveworks – Taper Bearing Set (Part No.S-A-12)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.A-12)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Rein – Bushing (Part No.AVB0555)
from
$17.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Matches Original Equipment design specifications
- Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair
MOOG – Stabilizer Bar Bushing Kit (Part No.K201388)
from
$18.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
MOOG – Control Arm and Ball Joint Assembly (Part No.RK620086)
from
$131.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Driveworks – Control Arm Front Lower Right (Part No.520-956)
from
$108.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Driveworks’ Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
MOOG – Control Arm and Ball Joint Assembly (Part No.RK80534)
from
$159.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Lemfoerder – Lemfoerder Steering Rack Boot (Part No.M1010263976LEM)
from
$12.78
The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Lemfoerder – Steering Rack Boot K (Part No.M1030277078LEM)
from
$18.19
Steering Rack Boot K
Rein – Power Steering Rack Boot (Part No.BKP0103R)
from
$23.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
See More
Popular 2002 Mercedes-Benz C240 Steering and Chassis Parts Categories
2002 Mercedes-Benz C240 Steering and Chassis Parts
You count on your 2002 Mercedes-Benz C240 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 82 Steering and Chassis Parts ranging in price from $2.54 to $976.21, you’re sure to find everything you need for your 2002 Mercedes-Benz C240.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 22 different brands like DriveWorks, Cardone, and National. 2002 Mercedes-Benz C240 Steering and Chassis Parts start as low as $2.54!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 148 extensive product reviews on 2002 Mercedes-Benz C240 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Stabilizer Bar Link with 5.0 stars and Control Arm Front Lower Right with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2002 Mercedes-Benz C240 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2002 Mercedes-Benz C240
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Mercedes-Benz C240 running right for years to come. In our inventory you’ll find brands like DriveWorks, Cardone, National, and even more.
Popular Dorman Steering and Chassis Parts
You’ll find popular Dorman brand products across Ball Joints. All are waiting to get your 2002 Mercedes-Benz C240 back on the road. Some of the top-rated Dorman products in these categories are:
from
$32.99
(1)
Power Steering Reservoir: Black, Plastic, Original Equipment Replacement
Power Steering Reservoirs
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 2002 Mercedes-Benz C240, and some of our most reviewed Cardone parts include:
FAQs for 2002 Mercedes-Benz C240 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2002 Mercedes-Benz C240?
Out of 82 Steering and Chassis Parts for the 2002 Mercedes-Benz C240, the most popular in our inventory are:
What are the top-rated 2002 Mercedes-Benz C240 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2002 Mercedes-Benz C240 based on customer reviews/ratings are:
from
$39.99
(2)
Stabilizer Bar Link
“I ordered the sway bar links expecting the original parts but when I picked them up they gave me the Moog version. Thankfully they worked out with no”
