2002 Lexus GS430 Steering and Chassis Parts
More 2002 Lexus GS430 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2002 Lexus GS430, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2002 Lexus GS430 Steering and Chassis Parts
Carquest Premium – Power Steering Pressure Switch (Part No.SAA3945)
from
$58.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Cardone – Power Steering Pump (Part No.21-5368)
from
$202.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Dorman – Alignment Caster / Camber Control Arm (Part No.528-304)
from
$307.99
This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.
Product Features:
See More
Product Features:
- Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment
- Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels
- Durable construction – this part is made from quality materials for reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
AST – Polyurethane Steering Rack Bushing Kit (Part No.M1064648318AST)
from
$71.19
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.
Product Features:
See More
Product Features:
- Unique polyurethane alternative
- Sleeves in the bushings freely rotate which enhances longevity
- Impregnated with graphite to aid in lubrication and reduce noise
- Alternative to conventional rubber suspension bushings
Beck/Arnley – Ball Joint (Part No.101-4960)
from
$83.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Necessary hardware supplied as needed for a complete installation
- Hardware functionality matches original design requirements
- Application specific for this vehicle
MOOG – Tie Rod End (Part No.ES800213)
from
$73.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Dorman – Suspension Knuckle B (Part No.L2092698252DOR)
from
$81.31
Suspension Knuckle B
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Sankei 555 – Sway Bar Link (Part No.L1030177591SNK)
from
$51.83
The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Powercraft – Pump Seal Kit (Part No.8996)
from
$46.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Ball Joint (Part No.RP11572)
from
$101.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rein – P/S Air Control Valv (Part No.M2045136067RIN)
from
$88.67
P/S Air Control Valv
EMPI – Steering Rack Boot Kit (Part No.M1030151622EMP)
from
$18.35
Steering Rack Boot Kit
AST – Sway Bar Bushing (Part No.L1050398317AST)
from
$19.76
Sway Bar Bushing
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK621466)
from
$119.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Powercraft – Rack Pinion Seal Kit (Part No.8990)
from
$93.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Dorman – Suspension Knuckle Bushing (Part No.523-077)
from
$51.99
This control arm ball bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)
from
$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Cardone – Rack and Pinion Assembly (Part No.26-2626)
from
$371.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion – Remanufactured (Part No.M1000899588CAR)
from
$502.18
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Protective coating applied to each unit, where applicable, to extend the life of the unit
- 100% performance testing to ensure perfect fit, function and reliable performance
- 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
- 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
- Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
- Valve housings, where applicable, have polished micro-finish sleevings for durability
- Built to meet or exceed O.E.M. performance
MOOG – Stabilizer Bar Bushing Kit (Part No.K200621)
from
$43.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Sankei 555 – Sway Bar Link (Part No.L1030140509SNK)
from
$41.14
The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Carquest Premium – Pressure Hose Assembly (Part No.37261)
from
$151.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Popular 2002 Lexus GS430 Steering and Chassis Parts Categories
2002 Lexus GS430 Steering and Chassis Parts
You count on your 2002 Lexus GS430 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 68 Steering and Chassis Parts ranging in price from $2.99 to $502.18, you’re sure to find everything you need for your 2002 Lexus GS430.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 15 different brands like Carquest Premium, Cardone, and Moog. 2002 Lexus GS430 Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 87 extensive product reviews on 2002 Lexus GS430 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Tie Rod End with 3.0 stars and Bulk – 3/8" I.D. Return Hose J189 with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2002 Lexus GS430 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2002 Lexus GS430
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Lexus GS430 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Cardone, Moog, and even more.
Popular Driveworks Steering and Chassis Parts
You’ll find popular Driveworks brand products across Tie Rods. All are waiting to get your 2002 Lexus GS430 back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 2002 Lexus GS430, and some of our most reviewed Cardone parts include:
FAQs for 2002 Lexus GS430 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2002 Lexus GS430?
Out of 68 Steering and Chassis Parts for the 2002 Lexus GS430, the most popular in our inventory are:
from
$7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated 2002 Lexus GS430 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2002 Lexus GS430 based on customer reviews/ratings are:
from
$52.99
(3)
Tie Rod End
“Great item, my gs300 never drives better! never thought it would be tie rods (inner and outter)”
from
$52.99
(1)
Tie Rod End
“Tie rods were easy to replace on my 2001 Lexus GS300. Suspension is much better and car rides smooth. Will need alignment after replacing”
