2002 International 4400LP Suspension Parts
More 2002 International 4400LP Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2002 International 4400LP, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2002 International 4400LP Suspension Parts
Monroe – Magnum Shock Absorber (Part No.65484)
from
$135.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
- Single-lip, low-friction oil seal
Bulldog HD – Heavy-Duty Shock Absorber – 2010-2016 International Prostar (Part No.HD1215-0041)
from
$83.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Monroe – Magnum Shock Absorber (Part No.65492)
from
$106.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
Bulldog HD – Heavy-Duty Shock Absorber – 2004-2011 Ford F650 (Part No.HD1215-0055)
from
$109.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Monroe – Magnum Shock Absorber (Part No.66683)
from
$73.99
The Monroe® Magnum shock absorber for class 3-6 Vehicles is gas-charged for quicker response and a stable, more comfortable ride. Replacing worn-out units with hard-working Magnum shocks can help reduce excessive vibration. The result can be better tire l
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – on most applications
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld provide up to 13,100 lbs. (6,395 kg) tensile strength for maximum durability – when required
- 2-inch (50.8 mm) or 2-1/4-inch (57.2 mm) reserve tube More fluid for more consistent performance – when required
- 1-3/8-inch (35 mm) bore Larger bore than most shocks to provide more efficient and consistent control – on most applications
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
Monroe – Magnum Shock Absorber (Part No.66924)
from
$87.99
The Monroe® Magnum shock absorber for class 3-6 Vehicles is gas-charged for quicker response and a stable, more comfortable ride. Replacing worn-out units with hard-working Magnum shocks can help reduce excessive vibration. The result can be better tire l
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – on most applications
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld provide up to 13,100 lbs. (6,395 kg) tensile strength for maximum durability – when required
- 2-inch (50.8 mm) or 2-1/4-inch (57.2 mm) reserve tube More fluid for more consistent performance – when required
- 1-3/8-inch (35 mm) bore Larger bore than most shocks to provide more efficient and consistent control – on most applications
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
Bulldog HD – Heavy-Duty Shock Absorber – 2004-2011 Ford F650 (Part No.HD1215-0063)
from
$61.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Monroe – Magnum Shock Absorber (Part No.65488)
from
$146.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
- Single-lip, low-friction oil seal
Bulldog HD – Heavy-Duty Shock Absorber – 2004-2009 Ford F650 (Part No.HD1215-0073)
from
$97.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Monroe – Magnum Shock Absorber (Part No.66422)
from
$78.99
The Monroe® Magnum shock absorber for class 3-6 Vehicles is gas-charged for quicker response and a stable, more comfortable ride. Replacing worn-out units with hard-working Magnum shocks can help reduce excessive vibration. The result can be better tire l
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – on most applications
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld provide up to 13,100 lbs. (6,395 kg) tensile strength for maximum durability – when required
- 2-inch (50.8 mm) or 2-1/4-inch (57.2 mm) reserve tube More fluid for more consistent performance – when required
- 1-3/8-inch (35 mm) bore Larger bore than most shocks to provide more efficient and consistent control – on most applications
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
- 10-stage valving: Reacts to wide range of driving conditions – on most applications
- All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
Monroe – Magnum Shock Absorber (Part No.65487)
from
$112.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
Monroe – Magnum Shock Absorber (Part No.65144)
from
$121.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
Bulldog HD – Heavy-Duty Shock Absorber – 2003-2018 IC Corporation CE School Bus (Part No.HD1215-0084)
from
$71.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Bulldog HD – Heavy-Duty Shock Absorber – 2010-2011 Ford F650 (Part No.HD1215-0022)
from
$85.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.
Product Features:
See More
Product Features:
- Robotic 360 Degree Welds; Highest Weld Strength in the Industry
- Propriety Value Design for long lasting compression and rebound performance
- Brushing rubber formulation with lowest levels of filler
- OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
- Double lip seal design to reduce excessive misting and extend damping life cycle
Monroe – Magnum Shock Absorber (Part No.65143)
from
$117.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe
Product Features:
See More
Product Features:
- Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
- PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
- Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
- Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
- 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
- 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
- .05-inch Pressure tube withstanding pressure of 9KPSI
- 10-stage valving Reacts to wide range of driving conditions – on most applications
Popular 2002 International 4400LP Suspension Parts Categories
2002 International 4400LP Suspension Parts
You count on your 2002 International 4400LP to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 8 Suspension Parts ranging in price from $61.99 to $121.99, you’re sure to find everything you need for your 2002 International 4400LP.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 2 different brands like Monroe and Bulldog HD. 2002 International 4400LP Suspension Parts start as low as $61.99!
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2002 International 4400LP below to get started!
FAQs for 2002 International 4400LP Suspension Parts
What are the most purchased Suspension Parts for the 2002 International 4400LP?
Out of 8 Suspension Parts for the 2002 International 4400LP, the most popular in our inventory are:
