2002 International 3800 Cooling and Climate Controls
More 2002 International 3800 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2002 International 3800, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2002 International 3800 Cooling and Climate Controls
Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.96324)
from
$28.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.
Product Features:
See More
Product Features:
- Standard life Spin-on coolant filter
- Made in USA
- Includes 4 Units BTA PLUS
- Maintenance filter for systems with 7-16 gallons capacity. Can be used with 89019 base.
Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.89075)
from
$55.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.
Product Features:
See More
Product Features:
- Standard life Spin-on coolant filter
- Made in USA
- Includes 15 Units BTA PLUS
- Maintenance filter for systems with 44-51 gallons capacity. Can be used with 89019 base.
Carquest Premium – Coolant Spin-on without Chemicals (Part No.89070)
from
$23.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.
Product Features:
See More
Product Features:
- Standard life Spin-on coolant filter
- Made in USA
- Can be used with 89019 base.
Gates – Heavy-Duty Engine Water Pump (Part No.44053HD)
from
$115.99
Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.
Product Features:
See More
Product Features:
- Our heavy-duty water pump o┐ering is designed to handle severe and rigorous conditions
- 100 percent fully tested unitized bearings and seals
- Computerized machined surfaces for proper fit and sealing
- Gates heavy-duty water pumps are represented as a part number with an HD suffix
- New pumps manufactured to ISO/TS 16949 standards
Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.59-8560)
from
$188.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.
Product Features:
See More
Product Features:
- 100% Factory tested for leakage and dimensional precision
- Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
- Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
- Assembled with new, high-quality unitized shaft seals to prevent premature leakage
- Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
Driveworks – Water Pump – Heavy Duty Reman (Part No.59-8598)
from
$268.99
A1 CARDONE Remanufactured Water Pumps offer a complete replacement part solution, with application coverage spanning from antique to present-day vehicles. With over 40 years of remanufacturing expertise, all units are 100% tested and engineered to meet or exceed O.E.M. performance, providing you a quality product you and your vehicle can rely on.
Product Features:
See More
Product Features:
- Every unit is supplied with a premium quality mounting gasket for a guaranteed, leak-proof seal on all mounting surfaces
- 100% computer tested for maximum performance and durability
- Supplied with new O.E.M. supplied unitized seals, ensuring long-lasting, trouble-free performance
- Original casting specifications are strictly followed to ensure proper fit for easy installation and proper water flow and maximum cooling
- Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
- Applications demanding high off-set loads are upgraded to a Ball/Roller bearing to ensure long-lasting reliable performance
- Hubs and impellers are precisely perpendicular to the bearing shaft to eliminate excessive bearing load and noise
- Built to meet or exceed O.E.M. performance
Imperial – Electric Fan – 10" Diameter (Part No.226110)
from
$67.99
Electric fan with 10″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
Dorman – HD Solutions – Heavy Duty Pressurized Coolant Reservoir (Part No.603-5110)
from
$372.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir matches the fit and function of the original part
- Ideal solution – engineered for a seamless installation
- Durable construction – manufactured from quality materials to withstand underhood heat and vibration
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Dorman – HD Solutions – Heavy Duty Pressurized Coolant Reservoir (Part No.603-5101)
from
$164.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir matches the fit and function of the original part
- Ideal solution – engineered for a seamless installation
- Durable construction – manufactured from quality materials to withstand underhood heat and vibration
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248°F
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160°F – 210°F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10240)
from
$5.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10239)
from
$8.29
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Integrated Housing HD Thermostat: 190 Degrees (Part No.14889)
from
$92.99
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Heavy Duty Thermostat: 190 Degrees (Part No.14559)
from
$74.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: With Seal, 205 Degrees (Part No.14252)
from
$16.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Heavy Duty Thermostat: With Seal, 190 Degrees (Part No.14539)
from
$38.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Reverse Rotation Blower Motor Wheel (Part No.35207)
from
$54.99
Product Features:
See More
- Durable Plastic Material
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Set screw installation
Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35448)
from
$15.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Durable Plastic Material
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Retainer clip installation
Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38886)
from
$52.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38729)
from
$36.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Precision machined ports
Popular 2002 International 3800 Cooling and Climate Controls Categories
2002 International 3800 Cooling and Climate Controls
You count on your 2002 International 3800 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 27 Cooling and Climate Controls ranging in price from $5.99 to $660.99, you’re sure to find everything you need for your 2002 International 3800.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 6 different brands like Imperial, Carquest Premium, and Gates. 2002 International 3800 Cooling and Climate Controls start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 216 extensive product reviews on 2002 International 3800 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Standard Rotation Blower Motor Wheel with 1.0 stars and Thermostatic Fan Control – Adjustable with 2.5 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2002 International 3800 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2002 International 3800
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 International 3800 running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Gates, and even more.
Popular Driveworks Water Pumps Cooling and Climate Controls
You’ll find popular Driveworks Water Pumps brand products across Engine Cooling Parts. All are waiting to get your 2002 International 3800 back on the road. Some of the top-rated Driveworks Water Pumps products in these categories are:
Top-Rated Imperial Cooling and Climate Controls
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Cooling and Climate Controls for your 2002 International 3800, and some of our most reviewed Imperial parts include:
FAQs for 2002 International 3800 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2002 International 3800?
Out of 27 Cooling and Climate Controls for the 2002 International 3800, the most popular in our inventory are:
What are the top-rated 2002 International 3800 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 2002 International 3800 based on customer reviews/ratings are:
from
$15.99
(4)
Standard Rotation Blower Motor Wheel
“I bought this since it said it would work for a 74 cuda which it didnt. It was too big compared to the old. So i just used my old one.”
from
$62.99
(2)
Thermostatic Fan Control – Adjustable
“Need to find brass bushings to fit sensor to intake.Very easy to install!”
