2002 Ford F-150 Performance Air Intake Kits

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack adapter, stainless steel clamps, and all necessary hardware for an OE fit and finish. The MAF sensor and PCV hose have provisions to mount on the intake tube.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

“Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″” tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Top Mounted Heat Shield Design: aFe developed this wrinkle-black powder-coated aluminum heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large Dual 3″” Intake Tubes: Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tube pressure and maximizes airflow and velocity Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.”

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

This K&N NextGen cold air intake system is engineered for your FORD F150/RAPTOR V6-2.7/3.5L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 24.6 percent (driver side) and 33.25 percent (passenger side) to your engine and provides an increase of 27.20 horsepower and 40.29 torque with no tune required. This intake system is paired with a washable, reusable High-Flow lifetime Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

The AEM 21-8128DC Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Ford F150 EcoBoost models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The air intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the intake air temperature sensor. The dual intake AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-8128DC vehicle applications to determine the legal status for each vehicle.

“aFe POWER Track Series Intake Systems, the pinnacle of innovation in open-element intakes. Showcasing a one-piece housing that shields from elements and heat, seamlessly fitting into the engine bay. The highlight of the Track Series is its carbon fiber intake tube, meticulously CAD-designed and refined through dyno-testing. The result is a visually striking, lightweight system that delivers exceptional performance and a captivating induction sound. This 9″” tall 360-degree radial flow air filter features a 5-1/2″” flange and our pre-oiled black Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (Cross-linked Polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, and an aggressive air intake sound. The built-in air intake scoop captures cold air directly from the top of the radiator support thanks to its huge opening. Lightweight twill weave carbon fiber with red Kevlar tube directs the filtered air from the massive air filter to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of carbon fiber and red kevlar material (No fiberglass). The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation. Stainless-steel clamps are included for strength, and premium silicone couplers allow for ample flexibility.”

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with MAF sensor sleeve, couplers, velocity stack, stainless steel clamps, and all necessary hardware for an OE fit and finish. There are provisions to mount the PCV hose and MAF sensor.

K&N , 70-2591. PERFORMANCE PARTS>PERFORMANCE FILTERS AND INTAKES>AIR INTAKES>AIR INTAKES from K&N

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a black washable, reusable low restriction Spectre air filter, black powder coated aluminum intake tube and a black powder coated steel heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with the necessary rubber boots, velocity stack, stainless steel clamps and all necessary hardware for an OE fit and finish.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

The AEM 21-8129DC Brute Force Air Intake System produces horsepower And torque gains by replacing the vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Ford F150 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the EVAP vent And crank case vent hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-8129DC vehicle applications to determine the legal status for each vehicle.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube And the paper filter, in order to help boost horsepower And mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter And an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten And improve clean air flow to the engine for added throttle response And increased horsepower And torque. Each kit is custom made to fit specific vehicles And is easy to install And requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable And fully backed by the AIRAID No-Hassle limited lifetime warranty. Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.