2002 Ford Explorer Exhaust Parts

Below you will find various in-demand Ford Exhaust Parts, components and accessories for your 2002 Explorer. Advance Auto Parts has popular Explorer parts like Exhaust Mufflers, Exhaust Fittings, Exhaust Manifold and Headers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Explorer model years including 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and more. Select a category of 2002 Ford Explorer Exhaust Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2002 Ford Explorer Exhaust Parts Categories

Exhaust Manifold Hardware Kits

Exhaust Manifold and Headers

Mufflers

Exhaust Resonator and Pipe Assemblies

Catalytic Converters

Tail Pipes

Exhaust Manifold and Header Hardware

Exhaust System Kits

Exhaust Pipes

Exhaust Hangers and Hardware

Exhaust Extension Pipes

Exhaust Manifold Gaskets

Exhaust Clamps

Exhaust Pipe and Flange Gaskets

Exhaust Manifold Gasket and Hardware Kits

Essential Exhaust Parts for 2002 Ford Explorers

from

$519.99

Product Features:

Universal down and forward turbo headers for Small Block Ford engines
Available with 1-3/4″ or 1-7/8″ mandrel bent primary tubes and 3″ collectors with merge spears for increased exhaust velocity
3/8″ thick header flanges for a leak-free seal
3″ V-band flanges and clamps included
Premium header gaskets and bolts included
Available in ceramic coated mild steel, natural 304 stainless steel, and polished 304 stainless steel

from

$40.49

Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$1045.99

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 333313. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1995 Ford Explorer 4.0L. MagnaFlow 333313 includes (1) Flange Gasket, (1) Donut Gasket. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$877.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51088. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2001 Ford Explorer 5.0L & 1999-2001 Mercury Mountaineer 5.0L. MagnaFlow 51088 interchanges with OE parts XL2Z-5E212-AB. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$14.99

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.29

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Designed and manufactured to meet the needs of the exhaust system repair environment.
Verified, tested and certified proprietary Organic coating resists corrosion.
Tightly controlled coefficient of friction ensures reliable installation.
Application specific kit contents
Self-locking nuts (where applicable).

from

$102.99

Vibe-Lock Bolt

from

$48.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold

from

$34.99

Multi-Layered Steel (MLS) exhaust gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.

Product Features:

Designed for extreme cylinder pressures by high horsepower-high compression turbocharged, supercharged and nitrous oxide injected engines
Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention
Stress formed inner and outer layer embossments act like springs that rebound under flange clamp load, creating force to seal extreme pressures
Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials
Total gasket thickness .075 inch

from

$53.99

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$38.49

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$101.99

Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:

RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life

from

$118.99

Product Features:

CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.

from

$107.99

Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:

EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system

from

$54.99

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$1347.99

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

from

$854.99

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16606 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Driver Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16606 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16606 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

Durable corrosion-resistant stainless steel construction
CNC precision robotic manufacturing techniques
Dyno-proven performance

from

$14.99

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.29

Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.29

Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards. To ensure a gas-tight connection and a secure suspension, we always recommend the replacement of the mounting parts when fitting a new exhaust.

Product Features:

BRExhaust also develops the installation hardware to the same standards.
Manufactured from quality materials to ensure maximum durability
Proper fit and functionality to finish your install
Perfect, gas-tight performance
Exhaust accessory that facilitates a complete installation process.
Built to OEM specifications

from

$32.99

This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.

Product Features:

Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles
Ideal solution – engineered to help ensure secure connections between exhaust system components
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$9.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$55.99

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$117.99

RESISTS CORROSION : Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL : Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE : Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$55.99

This components in this exhaust manifold gasket and hardware kit are designed to match the fit and function of the original components to restore a secure connection between the cylinder head and the exhaust manifold on specified vehicles.

Product Features:

Direct replacement – engineered to match the fit, function and performance of the original gasket(s) and hardware required to attach the exhaust manifold to the cylinder head
Restores functionality – designed to ensure a secure connection when the original gasket(s) and hardware have fatigued, cracked or failed, or the exhaust manifold is being serviced
Durable construction – designed, manufactured and tested to strict specifications for reliable service
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

Direct replacement – engineered to match the fit, function and performance of the original gasket(s) and hardware required to attach the exhaust manifold to the cylinder head
Restores functionality – designed to ensure a secure connection when the original gasket(s) and hardware have fatigued, cracked or failed, or the exhaust manifold is being serviced
Durable construction – designed, manufactured and tested to strict specifications for reliable service
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 2002 Ford Explorer with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2002 Ford Explorer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Exhaust Parts are key to keeping your Explorer functioning at its best. At Advance Auto Parts, we offer a wide selection of 79 Exhaust Parts for the 2002 Ford Explorer, designed to meet your needs without breaking the bank. From Exhaust Muffler replacements to Exhaust Fittings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2002 Ford Explorer at great prices. Our Exhaust Parts inventory for this model ranges from just $2.99 to $3,168.99, with an average price of $288.07. Our 79 Exhaust Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2002 Ford Explorer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Ford Explorer, we stock popular OEM and aftermarket Exhaust Parts from top names like Flowmaster Inc., Dorman, Walker, and more. Flowmaster Inc. Exhaust Parts start at just $152.99 and boast an impressive 4.4 stars average rating from customers. Dorman and Walker also bring quality to the table, with Exhaust Parts available starting at $10.79, and at an average 4.2 stars rating. With 2,535 customer reviews and counting, our 2002 Ford Explorer Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 Ford Explorer is always ready to roll. We’re committed to providing you with everything you need to keep your Explorer in top shape, all in one place. Start shopping confidently below for your 2002 Ford Explorer!

Best-Selling Exhaust Mufflers for 2002 Ford Explorers

Enhance the driving experience in your Ford with 12 quality Exhaust Muffler components, starting at $57.99.

show more show less

from

$129.99

Product Features:

CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.

from

$204.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$249.99

The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$152.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$82.99

RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life

from

$118.99

Product Features:

CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.

from

$101.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$135.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$85.99

RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life

from

$137.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$78.99

Flowmaster’s Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the “chambered” muffler sound. The interior features a large 3.00-inch “straight-through” stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded “bright” 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.

Product Features:

Flowmaster quality
Straight through design
Moderate exterior performance tone
Durable fully welded 409S stainless steel case

from

$57.99

This BRExhaust replacement exhaust is engineered based on the original OEM design to ensure reliability, durability and performance. The ease of installation will save you time and effort, getting you back out on the road sooner. Each muffler features thicker hangers for added strength and fully welded, perforated tubes to guarantee a long service life.

Most Popular 2002 Ford Explorer Exhaust Fittings

Customize your Ford with 3 Exhaust Fittings products like Exhaust Clamps, all priced under $6.49.

show more show less

from

$6.49

BRExhaust also develops the installation hardware to the same standards.
Manufactured from quality materials to ensure maximum durability
Proper fit and functionality to finish your install
Perfect, gas-tight performance
Exhaust accessory that facilitates a complete installation process.
Built to OEM specifications

from

$2.99

Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:

CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from quality material for durability and long life
BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

from

$2.99

CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from quality material for durability and long life
BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

Top Picks for 2002 Ford Explorer Exhaust Manifold and Headers

Upgrade Ford Explorers with top-quality Exhaust Manifold and Headers parts, including 9 OEM and aftermarket selections for your 2002 model.

show more show less

from

$202.99

This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$28.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Designed and manufactured to meet the needs of the exhaust system repair environment.
Verified, tested and certified proprietary Organic coating resists corrosion.
Tightly controlled coefficient of friction ensures reliable installation.
Application specific kit contents
Self-locking nuts (where applicable).

from

$111.99

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$158.99

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$227.99

Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
Complete repair – includes all necessary gaskets and downpipe hardware
Trustworthy design – built by industry leader in aftermarket manifolds

from

$13.49

Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:

Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
Quality tested – kit components have undergone extensive testing to ensure proper function and long service life

from

$84.99

Vibe Lock Header Bolt Kit

from

$18.29

Black oxide finished carbon steel header bolts have a compact hex head and the flange is ideal for use where space is minimal?.your typical header flange. Includes seventeen (17) M8 – 1.25 x 25mm header bolts.

Product Features:

Compact hex head for easier installation
Grade 5
Black oxide finish
Resists Corrosion
Provides Clean Professional Appearance

from

$31.99

The factory-style fasteners used to secure the exhaust manifold to the cylinder head on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains ten application-specific M8-1.25 studs and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs and nuts required to install one exhaust manifold.

Product Features:

Upgraded hardware – this set of ten M8-1.25 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Exhaust Hangers for 2002 Ford Explorers

Select from 3 premium Exhaust Hangers parts for your 2002 Ford Explorer, with prices ranging from $14.99 to $28.99.

show more show less

from

$17.99

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.99

Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:

Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.99

The factory-style fasteners used to secure the exhaust manifold to the pipe flange on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains six application-specific M10-1.5 studs and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs and nuts required to join both manifolds to the manifold flanges.

Product Features:

Upgraded hardware – this set of six M10-1.5 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
Convenient solution – kit contains all the application-specific hardware necessary to join one exhaust manifold to one manifold flange
Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Sold 2002 Ford Explorer Exhaust Pipes

Explore our best-selling Ford parts for the 2002 Explorer among 11 OEM and aftermarket options starting from $10.49.

show more show less

from

$29.99

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
COMPATIBILITY – Ideal for weld or clamp installations

from

$10.79

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT – Designed to resist heat for long-lasting performance
PREMIUM MATERIALS – Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$83.99

Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:

EASY TO INSTALL – Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
RESISTS CORROSION – Durable aluminized steel construction and helps reduce corrosion
FACTORY SOUND – OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
STRONG AND DURABLE – Features thick OE-style flanges, hardware and brackets for strength
GET MORE MILES FROM YOUR RESONATOR ASSEMBLY – Engineered to fit, perform and sound like the original system

from

$12.49

AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT – Designed to resist heat for long-lasting performance
PREMIUM MATERIALS – Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$38.49

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$32.49

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$10.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$55.99

RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information

from

$14.99

BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:

Designed to facilitate hassle-free exhaust repair
Precise fitment
Manufactured from quality materials to ensure maximum durability
Designed for a leak free connection
OE structure and design
Built to OEM specifications
Secure gas-tight connection

from

$339.99

BRExhaust Direct-Fit Replacement Exhaust Kit 116-0033 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 116-0033’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 116-0033 includes (3) 2.375in. Band Clamps, (2) Bolts, (1) Donut Gasket, (2) Nuts and interchanges with OE parts 1L2Z-5202-BB, 1L2Z-5202-BC, 1L2Z-5230-AA, 1L2Z-5230-BB, 2L2Z-5202-AB, 4L2Z-5230-AA, 4L2Z-5230-AB, 5L2Z-5202-AA. BRExhaust Direct-Fit Replacement Exhaust Kit 116-0033 features durable Stainless Steel construction and is covered by a limited lifetime warranty.

Product Features:

Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
Leaves all emissions equipment intact, maintaining emissions compliance
Limited warranty

from

$14.56

Exhaust Pipe Gasket

Top-Rated Exhaust Parts Brands For Your 2002 Ford Explorer

Shop for the best-rated brands offering Exhaust Parts and other products for your 2002 Ford Explorers. Below you’ll find some of our best rated Exhaust Parts from Flowmaster Inc., Dorman, and Walker, and more. Exhaust Parts from these brands that fit a 2002 Explorer start at just $10.79 and are rated as high as 4.4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Flowmaster Inc. 2002 Ford Explorer Exhaust Parts

When it comes to maintaining or upgrading your 2002 Ford Explorer, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Flowmaster Inc. ticks all of those boxes. We offer a wide selection of Flowmaster Inc. Exhaust Parts, specifically designed for the 2002 Ford Explorer. With over 3 Flowmaster Inc. brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $152.99, with an average price of just $202.66. Plus, with over 3 customer reviews and an average rating of 4.4 stars, you can trust that our Flowmaster Inc. Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $204.99

(1)

50 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound

“Was looking for a muffler to replace my stock on 2001 Dakota with a 4.7L V8. Come accross the 50 series from flowmaster did lots of research on this ”

from $152.99

(1)

40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

“I installed this on my 1969 Mustang. The fit was perfect even though I went with an odd size (2 1/4), But that’s exactly what I wanted. The build of t”

from $249.99

(1)

70 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, 22in long, Non-Reversible, Mild Sound

“This replaces an old Flowmaster 70 series muffler. Nice sound and easy install.”

Popular Dorman 2002 Ford Explorer Exhaust Parts

Dorman auto parts is one of the highest quality Exhaust Part brands in the market. Any 2002 Ford Explorer owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2002 Explorer, Advance Auto Parts carries a full inventory of 3 Dorman Exhaust Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Exhaust Parts range from $14.99 to $202.99, plus, with more than 8 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

from $39.99

(1)

Exhaust Manifold Hardware Kit

“Great fit”

from $202.99

(1)

Direct Fit Exhaust Manifold: without Heat Shield

“They were a great product (RC-5127) and they worked out perfect.”

from $14.99

(6)

Exhaust Manifold Hardware Kit

“Exhaust manifold studs and nuts, fit and work great.”

FAQs for 2002 Ford Explorer Exhaust Parts

Which Exhaust Parts are best-sellers for 2002 Ford Explorers?

Out of 79 Exhaust Parts that fit 2002 Ford Explorers, the following parts are the top sellers:

Cap Screw-Hex Head-Grade 8- 1/2-13 x 2-1/2 In. (22148089) – $16.29
Exhaust Stud Kit – M10-1.5 x 62mm (22148140) – $17.99
Exhaust Manifold Hardware Kit (10242452) – $14.99

What’s the price range for 2002 Ford Explorer Exhaust Parts?

Exhaust Part prices for the 2002 Ford Explorer start at $2.99 and go up to $3,168.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2002 Ford Explorer?

The average price for Exhaust Parts for the 2002 Ford Explorer is $288.07. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Ford Explorer model years?

Yes, we currently carry Exhaust Parts for 33 model years of Ford Explorers between 1991 and 2025. Exhaust Parts are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Exhaust Parts for my 2002 Ford Explorer?

The cheapest 2002 Ford Explorer Exhaust Parts we carry in stock are:

Exhaust Clamp (11012137) – $2.99
Exhaust Clamp (11012223) – $2.99
Exhaust Clamp (11350564) – $6.49
Exhaust Pipe Flange Gasket (3204723) – $10.49
Exhaust Pipe Flange Gasket (18371101) – $10.79

What are the top-rated Exhaust Parts that fit the 2002 Ford Explorer?

Out of 2,535 reviews by customers, our 2002 Ford Explorer Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2002 Ford Explorer and their top-rated products:

Exhaust Gaskets
- Exhaust Manifold Gasket Set (15780306) – $15.99
Exhaust Mufflers
- Exhaust Manifold Gasket Set (15780306) – $15.99

What types of Exhaust Parts do you sell for my 2002 Ford Explorer?

As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 2002 Ford Explorer:

Can I get help with 2002 Ford Explorer Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Exhaust Parts and more.

What is your return policy for Ford Explorer Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Ford Explorer Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2002 Ford Explorer Exhaust Parts

Flowtech – Flowtech Small Block Ford Turbo Headers – Ceramic Coated (Part No.32166FLT)

Walker – Exhaust Pipe 2" Inlet (OD) 2.125" Outlet (OD) (Part No.53708)

MagnaFlow – Direct-Fit California Grade CARB Compliant Catalytic Converter (Part No.333313)

MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51088)

Dorman – Help – Exhaust Stud Kit – M12-1.75 x 62mm (Part No.03129)

Dorman – Help – Exhaust Flange Hardware Kit (Part No.03117)

Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75118)

Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97218)

Mr. Gasket – Mls Exhaust Gasket (Part No.4825G)

Walker – Exhaust Tail Pipe 2.25" Inlet (ID) (Part No.54683)

Walker – Exhaust Tail Pipe 2.25" Inlet (OD) (Part No.54395)

Walker – SoundFX Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (Part No.18573)

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (Part No.21479)

Walker – Direct Fit Exhaust Resonator and Pipe Assembly – 2.25" Inlet (OD) (Part No.46959)

Walker – Direct Fit Exhaust Resonator and Pipe Assembly 2.125" Inlet (OD) (Part No.54684)

Borla Performance Exhaust – T-304 Ss, 2.25"Pipe Dia, Dual Exhaust With Dual Exit, Split Without Tips (Part No.140659)

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.16606)

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03411B)

Dorman – Help – Cap Screw-Hex Head-Grade 8- 1/2-13 x 2-1/2 In. (Part No.03411)

BRExhaust – Exhaust Clamp (Part No.250-065)

Dorman – Exhaust Pipe Clamp (Part No.903-301)

Felpro – Exhaust Pipe Flange Gasket (Part No.61236)

Felpro – Exhaust Pipe Flange Gasket (Part No.60796)

Walker – Exhaust Pipe 2.625" Inlet (ID) 2" Outlet (OD) (Part No.41831)

Walker – Exhaust Y Pipe, 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.56272)

Dorman – Help – Exhaust Manifold Hardware And Gasket Kit (Part No.57174)

Dorman – Help – Exhaust Manifold Hardware And Gasket Kit (Part No.57074)

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.21422)

Flowmaster Inc. – 50 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.52557)

Flowmaster Inc. – 70 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, 22in long, Non-Reversible, Mild Sound (Part No.52572)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942441)

Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.18929)

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (Part No.21479)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)

Walker – SoundFX Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (Part No.27257)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942547)

Flowmaster Inc. – Flowmaster Flow FX Muffler (Part No.71225)

BRExhaust – Exhaust Muffler (Part No.101-1157)

BRExhaust – Exhaust Clamp (Part No.250-058)

Walker – Exhaust Clamp (Part No.35336)

Walker – Exhaust Clamp (Part No.35335)

Dorman – Direct Fit Exhaust Manifold: without Heat Shield (Part No.674-707)

Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75118)

Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-957)

Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-956)

Dorman – Direct Fit Exhaust Manifold: without Heat Shield (Part No.674-706)

Dorman – Help – Exhaust Flange Hardware Kit – M10-1.5 x 70mm (Part No.03130)

Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310070)

Mr. Gasket – Exhsthdrbolt (Part No.970G)

Dorman – Help – Exhaust Manifold Mount Hardware – M8-1.25mm Stainless Steel (OE Fix) (Part No.03411HP)

Dorman – Help – Exhaust Stud Kit – M10-1.5 x 62mm (Part No.03133)

Dorman – Help – Exhaust Stud Kit – M12-1.75 x 62mm (Part No.03129)

Dorman – Help – Exhaust Flange Stud Kit – M10-1.5 x 62mm Stainless Steel (OE Fix) (Part No.03133HP)

Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.52274)

Walker – Exhaust Pipe Flange Gasket (Part No.31637)

Walker – Direct Fit Exhaust Resonator and Pipe Assembly – 2" Inlet (OD) 2" Outlet (OD) (Part No.56121)

Walker – Exhaust Pipe Flange Gasket (Part No.31372)

Walker – Exhaust Tail Pipe 2.25" Inlet (OD) (Part No.54395)

Walker – Exhaust Pipe 2.625" Inlet (ID) 2.25" Outlet (OD) (Part No.51016)

Felpro – Exhaust Pipe Flange Gasket (Part No.60641)

Walker – Exhaust Pipe 2.625" Inlet (ID) 2" Outlet (OD) (Part No.41831)

BRExhaust – Exhaust Pipe Flange Gasket (Part No.256-1023)

BRExhaust – Stainless Steel Direct-Fit Exhaust System Kit (Part No.116-0033)

AP Exhaust – Exhaust Pipe Gasket (Part No.H4006977422APE)