2002 Ford E-250 Econoline Transmission Electrical Parts

This transmission range sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this transmission range sensor is designed to match the fit and function of the original sensor on specified vehicles.
• Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
• Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

• Delphi sensors are built to meet or exceed OE requirements and testing
• Delphi has improved the OE design by plating the connectors to help prevent corrosion and failure commonly caused by internal and cable short circuits
• Delphi’s OE design helps by preventing mechanical damage to the sensor wheel, soiling and increased wheel bearing free play
• Speed sensors maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection
• Designed digital output for maximum signal to noise ratio

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

• High grade materials that are equal to or better than OE provide durability and long service life
• All ABS sensors are tested for proper fit, form, and function
• Wire diameter and sheathing same or larger than OE to ensure product quality
• Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
• Includes all necessary brackets and hardware

The ABS or Anti-Lock Brake System ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up and to help provide safer stopping. Reasons for replacement include: ABS/brake lamp illumination, no or erratic ABS operation or problems with stability and or traction control systems.

Product Features:

• OE MATCHED: Manufactured to OE performance standards. Connectors, mounts and wire lengths are exact match to OE for worry free installation.
• INSTALLATION AND SUPPORT: Includes all necessary brackets and hardware. Application specific harness length
• THE DIFFERENCE: Glass reinforced plastic for better contamination resistance. Weather pack connectors prevent dirt and moisture contamination. Grease, mounting nut and instruction sheet included where applicable.

Vehicle Speed Sensor

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

• Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor
• Durable construction – this sensor is engineered to precise standards to ensure accurate signal output
• Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
• Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

The vehicle speed sensor is an input to the transmission control module (TCM) or powertrain control module (PCM) reporting the speed of the input shaft, intermediate shaft, or output shaft of the transmission. The control module uses this input to monitor the operation of the transmission and to detect excessive slippage should it occur.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Magnet size and strength optimized for precise signal output.
• Where applicable precision-wound coated copper windings increase signal output and increase longevity.
• Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

• High grade materials that are equal to or better than OE provide durability and long service life
• All ABS sensors are tested for proper fit, form, and function
• Wire diameter and sheathing same or larger than OE to ensure product quality
• Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
• Includes all necessary brackets and hardware

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
• Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
• RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413