2002 Chevrolet Silverado 1500 Towing Products

For use with 75 Series and HI Series winches.

Product Features:

• Winch Hydraulic Fittings

A CURT gooseneck hitch is more than a necessary tool for towing; it is an integrated extension of your truck that allows you turn your 4×4 into the workhorse it was designed to be. Gooseneck hitches are stronger, tougher and more subtle than any other, and when quality craftsmanship and intelligent design become the fuel that drives a gooseneck hitch, you get a towing solution that leaves others lost for words. The CURT under-bed Double Lock gooseneck hitch is strong, fast and easy to operate. It gets its name from the two locking pins that engage the trailer ball and hold it in place, giving you twice the security when towing especially heavy trailers. The Double Lock mounts underneath your truck bed with compatible gooseneck installation brackets and provides a removable 2-5/16″ gooseneck trailer ball with a gross trailer weight capacity up to 30,000 lbs. and a tongue weight capacity of 7,500 lbs. Using the heavy-duty operating handle, the trailer ball can be unlocked and flipped over whenever necessary to allow full use of the truck bed. The Double Lock comes with solid safety chain hookups, an attractive chrome trim ring, a durable A-coat finish and a limited lifetime warranty. This particular Double Lock gooseneck hitch is design to fit several models of Chevrolet, GMC, Dodge, Ram, Ford and Toyota (for a complete listing of vehicle and installation bracket compatibility, see application info).

Product Features:

• Double locking pins for superior trailer and trailer ball security
• Flip-and-store ball keeps truck bed free of obstructions
• Removable chrome-plated 2-5/16″ trailer ball fits most gooseneck trailers
• Installation requires no welding or truck bed removal
• Heavy-duty handle can be positioned on either side of the vehicle
• Chrome-plated trim ring provides a finished look
• Rubber hole cover helps prevent corrosion in trailer ball hole
• Includes spring-loaded safety chain loops and grade-8 hardware
• Protected by a durable A-coat finish

This vehicle specific wiring kit includes detailed instructions and wire leads to make connecting to the factory towing harness fast and easy. Locate the blunt cut wire harness near the spare tire, mount the 7 Blade, utilize the preinstalled connectors and you are ready to tow.

Product Features:

• Plug-In Simple!® Wiring Kit
• Utilizes OEM connectors for enhanced fit and weatherproofing
• Includes vehicle side 7 blade
• Corrosion resistant terminals
• Impact and corrosion resistant
• Includes mounting bracket and hardware
• Includes Step-By-Step Instructions

This trailer hitch plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this trailer hitch plug matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 1500, 1500 Classic, 1500 HD, 1500 HD Classic or 2500 and GMC Sierra 1500, 1500 Classic, 1500 HD or 1500 HD Classic (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
• Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy Silverado 1500, 1500 Classic or 1500 HD Classic and GMC Sierra 1500, 1500 Classic or 1500 HD Classic (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:

• Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
• Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Concealed main body for OE look and seamless integration with the vehicle
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:

• Mounts To Front Of Vehicle
• Can Be Permanent Or Detachable
• Free spooling; Mechanical Lock
• Sealed Against Elements; Can Be Used Under Water
• Stainless Steel Tie Bars And Fasteners
• Reversible Mounting
• Limited Warranty

Brake Control Adapte

A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Cadillac Escalade, Escalade EXT, Chevy Silverado or GMC Sierra 1500, 1500HD, 2500, 2500HD, 3500, Suburban 1500, 2500, Avalanche 1500, 2500, Tahoe, GMC Yukon, Yukon XL 1500 and 2500 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:

• Allows a CURT trailer brake controller to be plugged into OEM socket
• Quick plug harness installs with plug-and-play convenience
• Wire colors match standard brake controller harnesses
• Includes 24″ of 12 gauge wire for flexible installation
• Slit-loom sleeve keeps wires contained and protected

GM Genuine Parts Trailer Brake Controls are designed, engineered, and tested to rigorous standards, and are backed by General Motors. the brake controls signal a trailer’s brake system when the driver presses on the brake pedal and adjusts how much braking power is needed to stop the trailer. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

New trucks are becoming more car-like every year making it almost impossible to install a traditional brake controller. With the InSIGHT brake control, you gain the flexibility needed to make a simple, no tools required installation in any vehicle. This three part system allows the driver to bring the display back in sight where they can see what is going on as well as bringing the controls within a comfortable reach whether you are right or left handed. Mount the brain of the system out of sight. So, no more banging your knee every time you get in and out of your vehicle. This proportional brake controller creates stops that are safe and smooth, making you feel like you aren’t even towing a trailer! With easy to set gain adjustments and a digital display will make setting this brake control quick and easy. Seven On-the-fly sensitivity settings allows you to adjust for trailer weights and weather at the press of a button. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:

• Proportional braking
• No Tools Required Installation, no drilling required
• Percentage of braking power shown
• 7 Sensitivity Settings for Advanced Braking Control
• Intuitive vertical manual slide
• Short Proof Protected
• Controls up to 8 trailer brakes

It does not matter what you haul, you need to make sure to secure it properly in order to protect your truck, yourself and other motorists. Dee Zee Cab Rack Tie Downs offer a reliable method for securing your cargo to your cab rack. Designed to fit into your cab rack integrated channel, our Tie Downs glide along your rack accessory channel tightening into place for virtually endless possibilities.

Product Features:

• Tie Down Anchor For Cargo
• Cast Aluminum Finish
• Fits Into Integrated Channel In Cab Rack
• No Drilling Required

Tying down cargo in the bed of your truck should not be a struggle. You just need solid anchor points to secure the load properly. Dee Zee Tie Downs offer an easy way to add these anchor points- for a secure tie down every time. Do not worry about drilling your baby either because our tie downs fit into existing truck bed locations for both GM and Ford trucks and come with all the mounting hardware needed for an easy install. Dee Zee Tie Downs are made of cast aluminum with a black powder coated finish and rated for the maximum strength of your truck bed.

Product Features:

• Tie Down Anchor For Cargo
• Cast Aluminum Finish
• Fits Into Integrated Channel In Cab Rack
• No Drilling Required

The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest Premium electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

By incorporating Endurance design features that include oversized hinges, internal grommets for enhanced weather proofing and a lid that opens 180 degrees, this connector is guaranteed to last for years of trouble free use. Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing. Easy twist-mount installation requires no tools.

Product Features:

• Endurance Professional Grade
• Plug-In Simple!® Wiring Kit
• Utilizes OEM connectors create an exact fit and maximum weatherproofing
• Multi-Tow® provides multiple towing options from one connector
• Weatherproof lid opens 180 degrees
• Oversized hinge offers ultimate durability
• Superior Ergonomics
• For Use w/Factory Tow Package
• Impact And Corrosion Resistant

Add light mounts to your Dee Zee Aluminum or Steel Headache Rack or Rear Rack. With these convenient mounts that slide into the built in channel system, mounting your auxiliary lights is quick and easy. Several size options to meet your needs.

Product Features:

• Made From Rugged Steel
• Protective Gloss Black Powder Coat Finish
• Utilize The Accessory Channel On Aluminum Cab Racks
• Several Size Options To Meet Your Needs
• Made In USA

Husky Towing Products offers plug-and-play brake control harnesses that make the installation of your Husky Towing brake controller a snap. They are designed to allow the brake control to plug directly into your vehicle power system using an OEM connector. Husky Towing Products offers a complete line of hitches, brake assemblies, jacks, sway control solutions, and essential towing accessories. Each Husky product is precision engineered, constructed with durable, quality materials, and is rigorously tested to industry safety standards.

Product Features:

• The Safest Or Easiest Way To Wire A Brake Control To Your Tow-Prepped Vehicle
• Simply Attach The Adapter To The Brake Control
• Constructed with durable, quality materials, and is rigorously tested to industry safety standards
• Easy to install

Husky custom wiring harnesses fits all Husky brake controls that have a similar shaped plug. Simply attach the adapter to the Husky brake control. The safest or easiest way to wire a brake control to your tow-prepped vehicle.

Product Features:

• The Safest Or Easiest Way To Wire A Brake Control To Your Tow-Prepped Vehicle
• Simply Attach The Adapter To The Brake Control
• Constructed with durable, quality materials, and is rigorously tested to industry safety standards
• Easy to install

Original Equipment Manufacturer Style Replacement Side View Towing Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Textured Black

Original Equipment Manufacturer Style Replacement Side View Towing Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Textured Black

Fits a 2 inch receiver hitch. Can be used in the front, back, or on another vehicle.

Product Features:

• Winch Cradle

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 1500, 1500 Classic, 1500 HD, 1500 HD Classic or 2500 HD and GMC Sierra 1500, 1500 Classic, 1500 HD, 1500 HD Classic or 2500 HD (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 8,000 lbs. GTW and 800 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 12,000 lbs. WD and 1,200 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 8,000 lbs. gross trailer weight and 800 lbs. tongue weight
• Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Chevy Silverado 1500, 1500 Classic, 1500 HD, 1500 HD Classic or 2500 and GMC Sierra 1500, 1500 Classic, 1500 HD, 1500 HD Classic or 2500 (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:

• Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
• Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)