from

$77.99

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$251.87

LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:

OE quality and direct fit application
Made from high quality steel
Designed to reduce clutch chatter and vibration
Dynamically balanced

from

$119.99

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$27.49

Product Features:

Brand may vary by location

from

$103.68

The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

Extended service life
Compact, lightweight design
Sealed for life with high performance, application-specific grease
Simplified assembly
Integrated functionality
Design flexibility

from

$95.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$22.99

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
Large Diameter, Low Profile Design
Complete With Washers
Sold As A Kit
180,000 PSI

from

$31.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$20.29

GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Support the end of the transmission input shaft while the clutch is disengaged
Allows for smooth changing of gears
Helps keep transmission input shaft properly aligned
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$24.29

GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Support the end of the transmission input shaft while the clutch is disengaged
Allows for smooth changing of gears
Helps keep transmission input shaft properly aligned
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$152.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$117.33

The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$77.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$27.99

ATP Flywheel Shim

from

$26.99

FLYWHEEL SHIM

from

$26.99

FLYWHEEL SHIM

from

$432.86

Schaeffler is an OE clutch supplier to nearly all vehicle manufacturers around the world and has always offered a model-specific LuK RepSet to the Aftermarket for professional repair. For complete clutch replacement, you need a clutch disc, pressure plate and release bearings. The LuK RepSet contains these components and they are precision-tuned to function perfectly together. Professional repair can be conducted quickly and trouble-free. Each LuK RepSet includes a premium-quality, clutch pressure plate and disc assembly, a release bearing, and pilot bearing when required.

Product Features:

Original Equipment Replacement.
Direct fit application.
OEM quality friction plates and steels.
Clutch kit includes; Disc, Pressure Plate, Release Bearing, and Pilot Bearing when required.

from

$303.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$314.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$295.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$62.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$83.16

The Sachs Clutch Master Cylinder is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$29.99

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features: