2002 Chevrolet Prizm Suspension Parts

Essential Suspension Parts for 2002 Chevrolet Prizms

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

KYB – Strut Mount (Part No.L3030281233KYB)

Strut Mount

from

$84.31
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-813074)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$115.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Carquest – A/C Auto Temperature Control Relay (Part No.R3154)

A/C Auto Temperature Control Relay

from

$15.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:
  • Points meet or exceed the original for OE plus performance.
  • Featuring brass or copper contacts where specified for extended wear
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

KYB – Bellows Bump Stop Kit (Part No.L3037242480KYB)

Bellows Bump Stop Kit

from

$40.19
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:
  • Made from premium quality cellular polyurethane
  • The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
  • KYB Bump Stop Kits suit a variety of vehicle applications
  • KYB Bump Stop Kits perfectly compliment KYB Struts
See More

Suncore – Complete Strut Assem (Part No.55S15052)

Complete Strut Assem

from

$74.99
Complete Strut Assem

Suncore – Quick Strut Kit (Part No.2-55S15051-001)

Quick Strut Kit

from

$168.99
Quick Strut Kit

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-816058)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$145.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.281951)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$145.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
  • EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
  • CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
  • COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63620)

Strut-Mate Strut Boot Kit

from

$19.29
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63618)

Strut-Mate Strut Boot Kit

from

$30.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Dorman – Control Arm (Part No.L2000142618DOR)

Control Arm

from

$70.54
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:
  • Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance
See More

TRW – Strut Bump Stop Serv (Part No.L3045852394TRW)

Strut Bump Stop Serv

from

$46.83
Strut Bump Stop Serv

Sachs – Strut Bump Stop Service Kit (Part No.L3045450800SAC)

Strut Bump Stop Service Kit

from

$47.66
SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.

Product Features:
  • SACHS Service Kits help to prolong the life and performance of the shock or strut.
  • Always replace your Service kits in pairs.
  • Are built with design and quality that matches or exceeds OE quality
See More

ACDelco – Professional Shock Absorber Mount (Part No.L4010614643ACD)

Professional Shock Absorber Mount

from

$44.25
ACDelco Professional Shock Absorber Mount is the mechanical fastener that elastically connects the shock absorber to the vehicle components. When it comes to replacing your shocks, struts, and other suspension components, ACDelco offers a full line of Professional premium aftermarket suspension products. In addition to shocks and struts, we offer a variety of parts to make part replacement simple and precise. ACDelco Professional Suspension parts fit your GM vehicle, as well as a wide range of other vehicles on the road today.

Product Features:
  • High quality suspension component which further increases the safety and comfort of your vehicle
  • Allows for the replacement of individual worn out suspension components without having to replace the entire shock or strut assembly
  • ACDelco Professional Suspension Components share a level of quality construction with the Professional Shocks and Struts, ensuring the same level of performance from the component parts and shock or strut assemblies
  • Designed to fit with ACDelco shocks and struts for ease of installation and use
See More

MOOG – Strut Bellows (Part No.K90461)

Strut Bellows

from

$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

Driveworks – Strut Bellow (Part No.DW-K90462)

Strut Bellow

from

$6.99
Driveworks Shock Mount, Suspension Strut Bellows

Product Features:
  • Designed to meet or exceeds OE performance specifications
  • Durable neoprene rubber
See More

Dorman – Suspension Control Arm (Part No.521-468)

Suspension Control Arm

from

$63.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm (Part No.520-417)

Suspension Control Arm

from

$92.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

AST – Polyurethane Control Arm Bushing (Part No.L2030650298AST)

Polyurethane Control Arm Bushing

from

$28.35
Advanced Suspension Technology Control Arm Bushing offers a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

Dorman – Suspension Control Arm Bushing (Part No.533-877)

Suspension Control Arm Bushing

from

$13.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm Bushing (Part No.533-876)

Suspension Control Arm Bushing

from

$11.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Spring Seat (Part No.RP52967)

Spring Seat

from

$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces road noise
  • Reduces vibration
  • UV resistant
See More

Rare Parts – Spring Insulator (Part No.RP52950)

Spring Insulator

from

$35.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Rare Parts – Spring Insulator (Part No.RP52951)

Spring Insulator

from

$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

KYB – STRUT BELLOW (Part No.L303734951KYB)

STRUT BELLOW

from

$30.51
STRUT BELLOW

Upgrade your 2002 Chevrolet Prizm with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2002 Chevrolet Prizm, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your Prizm functioning at its best. At Advance Auto Parts, we offer a wide selection of 60 Suspension Parts for the 2002 Chevrolet Prizm, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Air Suspension and Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2002 Chevrolet Prizm at great prices. Our Suspension Parts inventory for this model ranges from just $6.99 to $219.99, with an average price of $82.01. Our 60 Suspension Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2002 Chevrolet Prizm without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Chevrolet Prizm, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline, Monroe, Carquest, and more. Valvoline Suspension Parts start at just $36.49 and boast an impressive 5 stars average rating from customers. Monroe and Carquest also bring quality to the table, with Suspension Parts available starting at $15.05, and at an average 4 stars rating. With 611 customer reviews and counting, our 2002 Chevrolet Prizm Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 Chevrolet Prizm is always ready to roll. We’re committed to providing you with everything you need to keep your Prizm in top shape, all in one place. Start shopping confidently below for your 2002 Chevrolet Prizm!

Best-Selling Coil and Leaf Springs for 2002 Chevrolet Prizms

Enhance the driving experience in your Chevrolet with 9 quality Coil and Leaf Spring components, starting at $30.51.

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.281952)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$145.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
  • EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
  • CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
  • COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-813073)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$115.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-813074)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$115.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Suncore – Complete Strut Assem (Part No.55S15051)

Complete Strut Assem

from

$74.99
Complete Strut Assem

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.813074)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$138.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

Rare Parts – Spring Seat (Part No.RP52967)

Spring Seat

from

$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces road noise
  • Reduces vibration
  • UV resistant
See More

Rare Parts – Spring Insulator (Part No.RP52951)

Spring Insulator

from

$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Rare Parts – Spring Insulator (Part No.RP52950)

Spring Insulator

from

$35.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

KYB – STRUT BELLOW (Part No.L303734951KYB)

STRUT BELLOW

from

$30.51
STRUT BELLOW

Most Popular 2002 Chevrolet Prizm Air Suspension and Kits

Customize your Chevrolet with 6 Air Suspension and Kits products like Suspension Self-Leveling Unit Fluids, Active Suspension Relays, and Front and Rear Shock or Strut Kits, all priced under $168.99.

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

Carquest – A/C Auto Temperature Control Relay (Part No.R3154)

A/C Auto Temperature Control Relay

from

$15.05
The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:
  • Points meet or exceed the original for OE plus performance.
  • Featuring brass or copper contacts where specified for extended wear
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63620)

Strut-Mate Strut Boot Kit

from

$19.29
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63618)

Strut-Mate Strut Boot Kit

from

$30.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Suncore – Quick Strut Kit (Part No.2-55S15051-001)

Quick Strut Kit

from

$168.99
Quick Strut Kit

AST – Sway Bar Link Bushin (Part No.L10532539487AST)

Sway Bar Link Bushin

from

$8.80
Sway Bar Link Bushin

Top Picks for 2002 Chevrolet Prizm Control Arms

Upgrade Chevrolet Prizms with top-quality Control Arms parts, including 8 OEM and aftermarket selections for your 2002 model.

Dorman – Suspension Control Arm (Part No.520-418)

Suspension Control Arm

from

$69.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm (Part No.520-417)

Suspension Control Arm

from

$92.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm (Part No.521-468)

Suspension Control Arm

from

$63.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Control Arm (Part No.L2000142618DOR)

Control Arm

from

$70.54
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:
  • Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance
See More

AST – Polyurethane Control Arm Bushing (Part No.L2030572530AST)

Polyurethane Control Arm Bushing

from

$50.54
Advanced Suspension Technology Control Arm Bushing offers a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

AST – Polyurethane Control Arm Bushing (Part No.L2030650298AST)

Polyurethane Control Arm Bushing

from

$28.35
Advanced Suspension Technology Control Arm Bushing offers a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

Dorman – Suspension Control Arm Bushing (Part No.533-877)

Suspension Control Arm Bushing

from

$13.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm Bushing (Part No.533-876)

Suspension Control Arm Bushing

from

$11.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

In-Demand Shocks and Struts for 2002 Chevrolet Prizms

Select from 37 premium Shocks and Struts parts for your 2002 Chevrolet Prizm, with prices ranging from $6.99 to $219.99.

KYB – Bellows Bump Stop Kit (Part No.L3037242480KYB)

Bellows Bump Stop Kit

from

$40.19
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:
  • Made from premium quality cellular polyurethane
  • The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
  • KYB Bump Stop Kits suit a variety of vehicle applications
  • KYB Bump Stop Kits perfectly compliment KYB Struts
See More

Driveworks – Strut Bellow (Part No.DW-K90462)

Strut Bellow

from

$6.99
Driveworks Shock Mount, Suspension Strut Bellows

Product Features:
  • Designed to meet or exceeds OE performance specifications
  • Durable neoprene rubber
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.281951)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$145.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
  • EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
  • CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
  • COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.181954)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$119.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
  • EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
  • CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
  • COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.181953)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$119.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
  • EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
  • CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
  • COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.905912)

Strut-Mate Strut Mounting Kit

from

$44.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

MOOG – Strut Bellows (Part No.K90461)

Strut Bellows

from

$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

Monroe – Gas-Matic Strut (Part No.81953)

Gas-Matic Strut

from

$51.99
Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.171953)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$171.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

Monroe – OESpectrum Strut (Part No.71951)

OESpectrum Strut

from

$107.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Monroe – OESpectrum Strut (Part No.71954)

OESpectrum Strut

from

$98.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

KYB – Jounce Bumper and Bellows (Part No.SB103)

Jounce Bumper and Bellows

from

$31.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Monroe – OESpectrum Strut (Part No.71953)

OESpectrum Strut

from

$107.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

MOOG – Strut Bellows (Part No.K90462)

Strut Bellows

from

$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-816058)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$145.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-816057)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$145.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Monroe – OESpectrum Strut (Part No.71952)

OESpectrum Strut

from

$107.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Suncore – Quick Strut Kit (Part No.2-55S11151-001)

Quick Strut Kit

from

$194.99
Quick Strut Kit

Suncore – Complete Strut Assem (Part No.55S15052)

Complete Strut Assem

from

$74.99
Complete Strut Assem

Rare Parts – STRUT PLATE W/O BRG (Part No.RP53213)

STRUT PLATE W/O BRG

from

$219.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restore Strut pivot ability.
See More

Rare Parts – STRUT PLATE W/O BRG (Part No.RP53214)

STRUT PLATE W/O BRG

from

$219.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restore Strut pivot ability.
See More

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.816057)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$159.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.816058)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$159.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.813073)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$138.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

Suncore – Complete Strut Assem (Part No.55S11152)

Complete Strut Assem

from

$94.99
Complete Strut Assem

Suncore – Complete Strut Assem (Part No.55S11151)

Complete Strut Assem

from

$94.99
Complete Strut Assem

TRW – Strut Mount (Part No.L3030852295TRW)

Strut Mount

from

$93.67
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Pivot for the steering mechanism, providing a smooth steering response
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

KYB – Strut Mount (Part No.L3030281233KYB)

Strut Mount

from

$84.31
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

KYB – STRUT MOUNT (Part No.L303035003KYB)

STRUT MOUNT

from

$71.07
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

Autopart International Inc – Strut Mounting Kit (Part No.L30331908446API)

Strut Mounting Kit

from

$61.42
Strut Mounting Kit

Autopart International Inc – Strut Mounting Kit (Part No.L30331980347API)

Strut Mounting Kit

from

$54.63
Strut Mounting Kit

Autopart International Inc – Strut Mounting Kit (Part No.L30331932338API)

Strut Mounting Kit

from

$52.90
Strut Mounting Kit

International Suspension Group – Strut Mount (Part No.L3030420470ISG)

Strut Mount

from

$47.96
Strut Mount

Sachs – Strut Bump Stop Service Kit (Part No.L3045450800SAC)

Strut Bump Stop Service Kit

from

$47.66
SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.

Product Features:
  • SACHS Service Kits help to prolong the life and performance of the shock or strut.
  • Always replace your Service kits in pairs.
  • Are built with design and quality that matches or exceeds OE quality
See More

TRW – Strut Bump Stop Serv (Part No.L3045852394TRW)

Strut Bump Stop Serv

from

$46.83
Strut Bump Stop Serv

ACDelco – Professional Shock Absorber Mount (Part No.L4010614643ACD)

Professional Shock Absorber Mount

from

$44.25
ACDelco Professional Shock Absorber Mount is the mechanical fastener that elastically connects the shock absorber to the vehicle components. When it comes to replacing your shocks, struts, and other suspension components, ACDelco offers a full line of Professional premium aftermarket suspension products. In addition to shocks and struts, we offer a variety of parts to make part replacement simple and precise. ACDelco Professional Suspension parts fit your GM vehicle, as well as a wide range of other vehicles on the road today.

Product Features:
  • High quality suspension component which further increases the safety and comfort of your vehicle
  • Allows for the replacement of individual worn out suspension components without having to replace the entire shock or strut assembly
  • ACDelco Professional Suspension Components share a level of quality construction with the Professional Shocks and Struts, ensuring the same level of performance from the component parts and shock or strut assemblies
  • Designed to fit with ACDelco shocks and struts for ease of installation and use
See More

FEQ – Strut Mount (Part No.L3030420470FEQ)

Strut Mount

from

$24.33
The FEQ strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Pivot for the steering mechanism, providing a smooth steering response
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Top-Rated Suspension Parts Brands For Your 2002 Chevrolet Prizm

Shop for the best-rated brands offering Suspension Parts and other products for your 2002 Chevrolet Prizms. Below you’ll find some of our best rated Suspension Parts from Valvoline, Monroe, and Carquest, and more. Suspension Parts from these brands that fit a 2002 Prizm start at just $15.05 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2002 Chevrolet Prizm Suspension Parts

When it comes to maintaining or upgrading your 2002 Chevrolet Prizm, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2002 Chevrolet Prizm. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Popular Monroe 2002 Chevrolet Prizm Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 2002 Chevrolet Prizm owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 2002 Prizm, Advance Auto Parts carries a full inventory of 13 Monroe Suspension Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Monroe Suspension Parts range from $19.29 to $171.99, plus, with more than 120 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

OESpectrum Strut
from
$107.99
This product is not rated

OESpectrum Strut

“”

Strut-Mate Strut Boot Kit
from
$19.29

(3)

Strut-Mate Strut Boot Kit

“Fast service, very happy with parts”

FAQs for 2002 Chevrolet Prizm Suspension Parts

Which Suspension Parts are best-sellers for 2002 Chevrolet Prizms?

Out of 60 Suspension Parts that fit 2002 Chevrolet Prizms, the following parts are the top sellers:

What’s the price range for 2002 Chevrolet Prizm Suspension Parts?

Suspension Part prices for the 2002 Chevrolet Prizm start at $6.99 and go up to $219.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2002 Chevrolet Prizm?

The average price for Suspension Parts for the 2002 Chevrolet Prizm is $82.01. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Chevrolet Prizm model years?

Yes, we currently carry Suspension Parts for 4 model years of Chevrolet Prizms between 1998 and 2001. Suspension Parts are bought most frequently for the following model years: 2001, 2000, 1999, and 1998.

What are the cheapest Suspension Parts for my 2002 Chevrolet Prizm?

The cheapest 2002 Chevrolet Prizm Suspension Parts we carry in stock are:

What are the top-rated Suspension Parts that fit the 2002 Chevrolet Prizm?

Out of 611 reviews by customers, our 2002 Chevrolet Prizm Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2002 Chevrolet Prizm and their top-rated products:

Can I get help with 2002 Chevrolet Prizm Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.

What is your return policy for Chevrolet Prizm Suspension Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Prizm Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.