2002 Chevrolet Malibu Air Intakes

Essential Air Intakes for 2002 Chevrolet Malibus

ACDelco – Throttle Position Sensor (Part No.213-912)

Throttle Position Sensor

from

$59.99
ACDelco GM Original Equipment Throttle Position Sensors (TPS) are electrical sensors, and are GM-recommended replacements for your vehicle’s original components. They electronically inform the engine control module (ECM) of the throttle’s plate angle or position. These signals are then used to regulate the fuel and ignition system. These original equipment throttle position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Electronically informs the ECM of the throttle valve angle
  • Used to regulate the fuel and ignition system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Throttle Position Sensor (Part No.213-4668)

Throttle Position Sensor

from

$64.99
ACDelco Professional Throttle Position Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Delphi – Throttle Position Sensor (Part No.SS10382)

Throttle Position Sensor

from

$63.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi sensors are built to meet or exceed OE requirements and testing
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
See More

Dorman – Help – Intake Manifold Bolt (Part No.03426)

Intake Manifold Bolt

from

$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.

Product Features:
  • Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98004 T)

Engine Intake Manifold Gasket Set

from

$104.99
Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

ACDelco – GM Original Equipment Intake Manifold Gasket (Part No.A8040354136ACD)

GM Original Equipment Intake Manifold Gasket

from

$7.12
ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.

Product Features:
  • Both upper and lower intake manifolds with matching gaskets sets available.
  • Only ACDelco and GM offer complete later model GM coverage.
  • Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)
See More

Edelbrock – Intake Manifold replacement runner to base gaskets (Part No.6950)

Intake Manifold replacement runner to base gaskets

from

$33.99
Product Features:
  • For Chevy 1957-86 302-327-350-400 S/B Tunnel Ram
  • For #7110
  • Includes Hardware
  • Multi Piece Configuration
  • Set of 5
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98015 T)

Engine Intake Manifold Gasket Set

from

$151.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Bolt Kit Intake Hex Head

from

$9.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:
  • Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
  • 3/8 inch-16 by 1 inch bolts
  • Kit includes 12 bolts and washers
  • Manufactured from high quality steel
  • Bolts feature hex heads
See More

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers (Part No.435-2001)

For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers

from

$63.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 Psi Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:
  • Features 12-point Smaller-than-standard Bolt Head
  • Thick Flat Washers Distribute Optimum Clamp Load
  • Ideal Use Where Space Is Minimal On Race Manifolds
  • Bolts And Washers Zinc Plated For Protection
  • Zinc Plated For Protection
See More

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers (Part No.435-2101)

For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers

from

$65.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Wont Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Dorman – GM Cowl Retainer (Part No.961-362D)

GM Cowl Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – GM Bumper Retainer (Part No.961-364D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Rivet-Push In-Hole Diameter .250 In. (Sold by each) (Part No.700-576)

Rivet-Push In-Hole Diameter .250 In. (Sold by each)

from

$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest – Air Charge Temperature Sensor (Part No.31A1016)

Air Charge Temperature Sensor

from

$18.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)

Air Charge Temperature Sensor

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Multi-Purpose Temperature Sensor

from

$35.99
ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Holley – Keith Dorton Series; Intake Manifold (Part No.300-110)

Keith Dorton Series; Intake Manifold

from

$491.99
This is a great Manifold designed for competition engines built for circle track and drag racing using 23 degree standard port heads. Ideal for classes that require cast iron heads that require an unported intake manifold.

Product Features:
  • Single Plane With Isolated Plenum
  • Square Bore Carburetor Mounting Flange
  • Isolated Water Cross Over
  • Power Band 4500-8500 rpm
  • w/Maximum Velocity At Ports
  • Crisp Throttle Response
See More

Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

from

$257.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More

Edelbrock – RPM Air-Gap Big Block Chevy 2-O Black Intake Manifold (Part No.75613)

RPM Air-Gap Big Block Chevy 2-O Black Intake Manifold

from

$588.99
Edelbrock part #75613 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8’s with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. The RPM Air-Gap incorporates the same race-winning te

Product Features:
  • 1500-6500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 4.45 in. Front Height, 5.22 in. Center Height, 6 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish (Part No.27013)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish

from

$360.99
Edelbrock part #27013 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

GM Genuine Parts – Multi-Purpose O-Ring (Part No.24504709)

Multi-Purpose O-Ring

from

$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Upgrade your 2002 Chevrolet Malibu with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 2002 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Air Intakes are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Air Intakes for the 2002 Chevrolet Malibu, designed to meet your needs without breaking the bank. From Intake Manifold Part replacements to Throttle Bodies & Carb Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2002 Chevrolet Malibu at great prices. Our Air Intakes inventory for this model ranges from just $0.99 to $288.99, with an average price of $71.80. Our 24 Air Intakes in stock come from 9 trusted brands, so you’re sure to find the right part for your 2002 Chevrolet Malibu without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Chevrolet Malibu, we stock popular OEM and aftermarket Air Intakes from top names like ACDelco Dorman, and more. ACDelco Air Intakes start at just $35.99 and boast an impressive 5 stars average rating from customers. With 274 customer reviews and counting, our 2002 Chevrolet Malibu Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place. Start shopping confidently below for your 2002 Chevrolet Malibu!

Best-Selling Intake Manifold Parts for 2002 Chevrolet Malibus

Enhance the driving experience in your Chevrolet with 13 quality Intake Manifold Part components, starting at $14.29.

Dorman – Upper Aluminum Intake Manifold (Part No.615-197)

Upper Aluminum Intake Manifold

from

$288.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.

Product Features:
  • Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – tested to ensure top-quality OEM performance and durability
  • Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
  • Trustworthy design – built by the industry leader in aftermarket manifolds
See More

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Multi-Purpose Temperature Sensor

from

$35.99
ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98003 T)

Engine Intake Manifold Gasket Set

from

$99.99
Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72226)

Engine Intake Manifold Bolt Set

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Premium quality parts
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90565)

Engine Intake Manifold Gasket Set

from

$66.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Dorman – Upper Intake Manifold Gasket Set: 20 Piece Set (Part No.615-205)

Upper Intake Manifold Gasket Set: 20 Piece Set

from

$65.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.

Product Features:
  • Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
  • Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Intake Manifold Bolt (Part No.03426)

Intake Manifold Bolt

from

$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.

Product Features:
  • Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MIK 98003 T)

Engine Intake Manifold Gasket Set

from

$139.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Problem-solving gaskets featuring advanced technologies
  • Application specific design to ensure a perfect fit
  • Exceeds original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Includes all parts needed to install the intake manifold
  • Includes all parts needed to install the intake manifold
See More

Dorman – Dorman Intake Manifold Gasket Set (Part No.A8043376696DOR)

Dorman Intake Manifold Gasket Set

from

$94.63
Dorman’s Intake Manifold Gasket Sets include all the gaskets and other hardware necessary for a complete, exact repair. In certain applications, Dorman improved metal construction has been used for increased gasket durability.

Product Features:
  • Kit provides ease and convenience of use
  • Airtight gasket seal prevents vacuum and in some cases coolant leaks
  • Bolts with thread locker provided for ease of installation (where applicable)
  • Direct replacement for a proper fit every time
See More

Carquest – Air Charge Temperature Sensor (Part No.31A1016)

Air Charge Temperature Sensor

from

$18.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1042)

Air Charge Temperature Sensor

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Mahle – Intake Man. Gasket S (Part No.A80431159595MAH)

Intake Man. Gasket S

from

$212.11
Intake Man. Gasket S

ACDelco – GM Original Equipment Intake Manifold Gasket Set (Part No.A8043376696ACD)

GM Original Equipment Intake Manifold Gasket Set

from

$151.48
ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.

Product Features:
  • Both upper and lower intake manifolds with matching gaskets sets available.
  • Only ACDelco and GM offer complete later model GM coverage.
  • Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)
See More

Most Popular 2002 Chevrolet Malibu Throttle Bodies & Carb Parts

Customize your Chevrolet with 8 Throttle Bodies & Carb Parts products like Throttle Position Sensors and Fuel Injection Throttle Body Heater Pipe O-Ring, all priced under $97.38.

ACDelco – Throttle Position Sensor (Part No.213-912)

Throttle Position Sensor

from

$59.99
ACDelco GM Original Equipment Throttle Position Sensors (TPS) are electrical sensors, and are GM-recommended replacements for your vehicle’s original components. They electronically inform the engine control module (ECM) of the throttle’s plate angle or position. These signals are then used to regulate the fuel and ignition system. These original equipment throttle position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Electronically informs the ECM of the throttle valve angle
  • Used to regulate the fuel and ignition system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Throttle Position Sensor (Part No.SS10382)

Throttle Position Sensor

from

$63.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi sensors are built to meet or exceed OE requirements and testing
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1004)

Throttle Position Sensor

from

$44.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Throttle Position Sensor (Part No.TH0045)

Throttle Position Sensor

from

$44.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
  • The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.
See More

ACDelco – Throttle Position Sensor (Part No.213-4668)

Throttle Position Sensor

from

$64.99
ACDelco Professional Throttle Position Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – Professional Throttle Position Sensor (Part No.C7012575714ACD)

Professional Throttle Position Sensor

from

$97.38
The ACDelco Professional, premium aftermarket Throttle Position (TPS) Sensor is a type of electrical sensor and the ideal high quality replacement for your GM vehicle. It electronically informs the engine management computer of the throttle’s plate angle or position. The signals are then used to regulate the fuel and ignition system. This premium aftermarket replacement throttle position sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Electronically inform the engine management computer of the throttle valve angle
  • Used to regulate the fuel and ignition system
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Throttle Position Sensor (Part No.ECA1598)

Throttle Position Sensor

from

$44.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

GM Genuine Parts – Multi-Purpose O-Ring (Part No.24504709)

Multi-Purpose O-Ring

from

$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Top Picks for 2002 Chevrolet Malibu Airboxes

Upgrade Chevrolet Malibus with top-quality Airboxes parts, including 3 OEM and aftermarket selections for your 2002 model.

Dorman – GM Bumper Retainer (Part No.961-364D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Rivet-Push In-Hole Diameter .250 In. (Sold by each) (Part No.700-576)

Rivet-Push In-Hole Diameter .250 In. (Sold by each)

from

$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Top-Rated Air Intakes Brands For Your 2002 Chevrolet Malibu

Shop for the best-rated brands offering Air Intakes and other products for your 2002 Chevrolet Malibus. Below you’ll find some of our best rated Air Intakes from ACDelco and Dorman, and more. Air Intakes from these brands that fit a 2002 Malibu start at just $0.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular ACDelco 2002 Chevrolet Malibu Air Intakes

When it comes to maintaining or upgrading your 2002 Chevrolet Malibu, using quality Air Intakes is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Air Intakes, specifically designed for the 2002 Chevrolet Malibu. With over 5 ACDelco brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $35.99, with an average price of just $81.97. Plus, with over 27 customer reviews and an average rating of 5 stars, you can trust that our ACDelco Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

GM Original Equipment Intake Manifold Gasket Set
from
$151.48
This product is not rated

GM Original Equipment Intake Manifold Gasket Set

“”

Throttle Position Sensor
from
$64.99
This product is not rated

Throttle Position Sensor

“”

Professional Throttle Position Sensor
from
$97.38
This product is not rated

Professional Throttle Position Sensor

“”

Popular Dorman 2002 Chevrolet Malibu Air Intakes

Dorman auto parts is one of the highest quality Air Intake brands in the market. Any 2002 Chevrolet Malibu owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2002 Malibu, Advance Auto Parts carries a full inventory of 7 Dorman Air Intakes. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Air Intakes range from $0.99 to $288.99, plus, with more than 14 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.

Intake Manifold Bolt
from
$14.29
This product is not rated

Intake Manifold Bolt

“”

GM Bumper Retainer
from
$4.49
This product is not rated

GM Bumper Retainer

“”

Nylon Grill Bumper Retainer
from
$3.99
This product is not rated

Nylon Grill Bumper Retainer

“”

FAQs for 2002 Chevrolet Malibu Air Intakes

Which Air Intakes are best-sellers for 2002 Chevrolet Malibus?

Out of 24 Air Intakes that fit 2002 Chevrolet Malibus, the following parts are the top sellers:

What’s the price range for 2002 Chevrolet Malibu Air Intakes?

Air Intake prices for the 2002 Chevrolet Malibu start at $0.99 and go up to $288.99 for the most premium parts.

What’s the average price of a Air Intake for a 2002 Chevrolet Malibu?

The average price for Air Intakes for the 2002 Chevrolet Malibu is $71.80. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Chevrolet Malibu model years?

Yes, we currently carry Air Intakes for 43 model years of Chevrolet Malibus between 1964 and 2025. Air Intakes are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Air Intakes for my 2002 Chevrolet Malibu?

The cheapest 2002 Chevrolet Malibu Air Intakes we carry in stock are:

What are the top-rated Air Intakes that fit the 2002 Chevrolet Malibu?

Out of 274 reviews by customers, our 2002 Chevrolet Malibu Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2002 Chevrolet Malibu and their top-rated products:

Can I get help with 2002 Chevrolet Malibu Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Air Intakes and more.

What is your return policy for Chevrolet Malibu Air Intakes?

Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.