2002 Chevrolet Impala Engine Parts

Popular 2002 Chevrolet Impala Engine Parts Categories

Essential Engine Parts for 2002 Chevrolet Impalas

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile

from

$164.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 Psi Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

Sealed Power – Engine Connecting Rod Bearing (Part No.2020CP 30)

Engine Connecting Rod Bearing

from

$6.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed bronze alloy lining with overplate
  • Popular for fatigue resistance & strength
  • Provides conformability required for older apps
  • Our standard material is comparable to competitors performance bearing
  • Note – This material offers less resistance to wear & corrosion than other materials.
  • Utilizes ISO & QS certified manufacturing
See More

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012)

Stock Replacement Engine Assembly Lubricant

from

$6.99
Made In USA. 4 OZ Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 80 Links, Timing Components, With Sprockets (Part No.9-0700SB)

Primary Timing Chain Kit: Exact Fit, 80 Links, Timing Components, With Sprockets

from

$84.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Cloyes Gear – Engine Balance Shaft Sprocket (Part No.S855)

Engine Balance Shaft Sprocket

from

$37.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.4663MA 1)

Engine Crankshaft Main Bearing Set

from

$97.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • A-Series bi-metal aluminum alloy
  • Greater seizure resistance than tri-metal material
  • Reduces dramatically or eliminates bearing wear
  • Exacting tolerances
  • Meets or exceeds OEM specifications
  • Made with silicon to provide greater surface hardness
See More

Melling Select Performnce – High Performance Cast Iron Standard Billet Gear Racing Oil Pump (Part No.10990)

High Performance Cast Iron Standard Billet Gear Racing Oil Pump

from

$230.99
Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. High volume performance upgrade for the M-99HV-S. The 10990 is a big block style oil pump made to fit the small block appl

Product Features:
  • 25% Higher volume anti-cavitation high performance upgrade of the M-99HVS
  • CNC machined phosphate coated cast iron housing and cover
  • Cover has extended idler shafts for additional support at high RPM’s
  • Standard billet steel spur gears
  • Adjustable pressure relief valve
  • Includes lower pressure spring; not installed
  • Includes chrome moly steel intermediate drive shaft with steel guide
  • Uses 3/4 inch diameter press-fit screen
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 10058)

Engine Valve Stem Oil Seal Set

from

$20.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Sealed Power – Camshaft Bearing Set (Part No.2100M)

Camshaft Bearing Set

from

$72.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Steel backed micro Babbitt lining material
  • Used in automotive and high-performance, Babbitt is designed to deform under extreme loads with o damaging other engine parts.
  • Fatigue life of cam bearings are nearly doubled
  • Ensures dependable performance and superior service life
  • Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
  • Application-specific design for perfect fit and correct operation
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT778)

Air Charge Temperature Sensor Connector

from

$35.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
  • Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
  • All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
  • Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Lakewood – Muscle Motor Mount (Part No.24087)

Muscle Motor Mount

from

$60.39
Stamped steel muscle mounts are the ideal alternative to noisy, vibrating solid mounts. Heavy gauge steel frame and engine brackets are vulcanized to hard durometer rubber. Safety interlock design eliminates need for torque straps or cables. GM application, see catalog for specific vehicle listing.

Product Features:
  • Without Noise Or Vibration
  • Heavy Gauge Steel Frame
  • Safety Interlock Design
  • No Need For Torque Straps/Cables
  • Ideal For Replacing Old Mounts
See More

Felpro – Engine Timing Cover Repair Sleeve (Part No.16202)

Engine Timing Cover Repair Sleeve

from

$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Engine$aver Hardware cost-saving application
  • Repairs worn sealing surfaces to assure a leak free repair
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Validated for fit, form, and function
See More

WSO – Crank Position Senso (Part No.A2255175626WSO)

Crank Position Senso

from

$61.25
Crank Position Senso

Dorman – Help – Automatic Belt Tensioner Bolt Kit for Impala 2005 – 03, 3.8L (Part No.45358)

Automatic Belt Tensioner Bolt Kit for Impala 2005 - 03, 3.8L

from

$13.99
Automatic Belt Tensioner Bolt Kit for Impala 2005 – 03, 3.8L

Carquest Premium – Engine Oil Level Sensor (Part No.SBA3701)

Engine Oil Level Sensor

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Mr. Gasket – Oildipstick (Part No.9706G)

Oildipstick

from

$51.99
Billet aluminum handle with flexible braided steel tube mounts to either exhaust manifold bolt or header flange. 20 inch length.

Product Features:
  • Flexible / Heat Resistant Braided Stainless Steel
  • Polished Aluminum Dipstick Handle
  • Engine Block Mount – Drivers Side
  • Includes Funnel Adapter Hose
See More

ACDelco – GM Original Equipment Engine Oil Pan Gasket (Part No.A6130354261ACD)

GM Original Equipment Engine Oil Pan Gasket

from

$18.06
ACDelco GM Original Equipment Engine Oil Pan Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Spectre – Pulley (Part No.4438)

Pulley

from

$99.99
Spectre’s high quality crankshaft, alternator and engine pulley sets are designed to help dress up your engine compartment. All of our pulleys are designed to work in OE applications and with the OE style serpentine or v-belt configuration.

Product Features:
  • Double belt groove
  • 7 inch diameter
  • Identify the water pump by looking at the distance between it and the timing cover, long water pumps are about 1 In. away from the timing cover
  • Triple chrome plated steel
See More

Sealed Power – Engine Valve Lifter (Part No.HT-969B)

Engine Valve Lifter

from

$5.29
Engine Valve Lifter

Spartan – Engine Cylinder Head; Chev 3.1/3.4 04-05 Head (Part No.2CW8)

Engine Cylinder Head; Chev 3.1/3.4 04-05 Head

from

$405.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Sealed Power – Engine Exhaust Valve (Part No.V-4345)

Engine Exhaust Valve

from

$14.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Chrome plated stem
  • Hard coating added to surface for strength & aiding in lubrication
  • Note – coating added in varying thicknesses depending on application
  • Innovative design, using leading edge materials
  • Utilizes ISO & QS certified manufacturing
See More

Carquest Premium – Camshaft Position Solenoid Connector (Part No.PTA1293)

Camshaft Position Solenoid Connector

from

$34.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-95)

Stock Replacement Type Oil Pump Intermediate Shaft

from

$16.29
A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:
  • Manufactured from high quality materials for consistent durable wear
  • Precision engineered for optimum fit and function
  • Designed for long-life and worry-free performance
  • Meets or exceeds original equipment specifications
See More

DEA – Engine Torque Rod (Part No.A7030321138DEA)

Engine Torque Rod

from

$21.99
Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:
  • USA Development and OEM laboratory – 14 OEM Engineers
  • Design Solutions and Installation Enhancements to Failing OEM designs
  • Complete Factory Testing and Vehicle Verification Resources
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 12869 T)

Engine Valve Cover Gasket Set

from

$46.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over a rigid carrier which resists high heat
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

ACDelco – GM Original Equipment Engine Hydraulic Cam Follower (Part No.A4010207833ACD)

GM Original Equipment Engine Hydraulic Cam Follower

from

$37.88
The ACDelco GM Original Equipment Engine Hydraulic Valve Adjuster/Valve Lifter is a GM-recommended replacement for your vehicle’s original component. It automatically maintains a Zero valve lash condition, preventing valve train noise and unnecessary valve train component wear. This original equipment engine hydraulic valve adjuster/valve lifter has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. This is important on these types of high-labor-hour repairs because the part designs are enhanced to incorporate GM OE updates, upgrades, and Technical Service Bulletins. Only ACDelco can offer complete late-model coverage and all ACDelco GM OE Engine Components.

Product Features:
  • Adjusts the valves on your vehicle’s engine for proper performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Engine Oil Pan: Direct Fit, Aluminum, Center Sump, 6 Quart (Part No.264-262)

Engine Oil Pan: Direct Fit, Aluminum, Center Sump, 6 Quart

from

$622.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
  • Complete assembly – includes replacement pan and drain plugs to match original components
  • Durable design – high-strength coating prevents future corrosion
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Steel Cup Expansion Plug 1-1/8 In., SC, Height 0.470 (sold by each) (Part No.555-020)

Steel Cup Expansion Plug 1-1/8 In., SC, Height 0.470 (sold by each)

from

$1.29
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 2002 Chevrolet Impala with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2002 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 228 Engine Parts for the 2002 Chevrolet Impala, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2002 Chevrolet Impala at great prices. Our Engine Parts inventory for this model ranges from just $0.65 to $2,514.99, with an average price of $80.28. Our 228 Engine Parts in stock come from 28 trusted brands, so you’re sure to find the right part for your 2002 Chevrolet Impala without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Chevrolet Impala, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Sealed Power, Dorman, and more. FELPRO Engine Parts start at just $3.99 and boast an impressive 5 stars average rating from customers. Sealed Power and Dorman also bring quality to the table, with Engine Parts available starting at $0.65, and at an average 4 stars rating. With 3,186 customer reviews and counting, our 2002 Chevrolet Impala Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place. Start shopping confidently below for your 2002 Chevrolet Impala!

Best-Selling Engine Gaskets and Seals for 2002 Chevrolet Impalas

Enhance the driving experience in your Chevrolet with 30 quality Engine Gaskets and Seal components, starting at $2.46.

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50080 R)

Engine Valve Cover Gasket Set

from

$26.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

MAHLE Original – Engine Valve Cover Gasket Set (Part No.VS50173A)

Engine Valve Cover Gasket Set

from

$29.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40625)

Engine Crankshaft Seal Kit

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Oil Pan Gasket Set: PermaDry Molded Rubber, 2 Piece Set (Part No.OS 30767 R)

Oil Pan Gasket Set: PermaDry Molded Rubber, 2 Piece Set

from

$66.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – OIL PAN GASKET SET (Part No.OS 30668 R)

OIL PAN GASKET SET

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – TIMING COVER GASKET SET (Part No.TCS 45971)

TIMING COVER GASKET SET

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

National – Multi Purpose Seal (Part No.320691)

Multi Purpose Seal

from

$16.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Mahle – Mahle Intake Plenum Gasket Set (Part No.A8048205423MAH)

Mahle Intake Plenum Gasket Set

from

$15.12
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50442 R)

Engine Valve Cover Gasket Set

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – TIMING COVER GASKET SET (Part No.TCS 45828)

TIMING COVER GASKET SET

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – TIMING COVER GASKET SET WITH REPAIR SLEEVE (Part No.TCS 45976)

TIMING COVER GASKET SET WITH REPAIR SLEEVE

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Valve Cover Gasket (Part No.VS 50320 R)

Engine Valve Cover Gasket

from

$16.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Mahle – Mahle Oil Pan Gasket Set (Part No.A6131202645MAH)

Mahle Oil Pan Gasket Set

from

$68.97
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

MAHLE Original – Oil Pan Gasket (Part No.OS32147)

Oil Pan Gasket

from

$50.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Oil pan gasket set contains all gaskets required.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40621-1)

Engine Crankshaft Seal Kit

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

National – Multi Purpose Seal (Part No.4307V)

Multi Purpose Seal

from

$39.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 70829)

Engine Valve Stem Oil Seal Set

from

$43.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

National – Shaft Repair Sleeve (Part No.99298)

Shaft Repair Sleeve

from

$52.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

GM Genuine Parts – Valve Cover Gasket (Part No.10154775)

Valve Cover Gasket

from

$25.99
GM Genuine Parts Engine Valve Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72144)

Engine Valve Stem Oil Seal Set

from

$27.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

MAHLE Original – Engine Coolant Water Bypass Gasket (Part No.C31274)

Engine Coolant Water Bypass Gasket

from

$7.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Victor Reinz – Engine Oil Pan Gasket Set (Part No.10-10211-01)

Engine Oil Pan Gasket Set

from

$88.99
Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Mahle – Mahle Oil Pan Gasket Set (Part No.A6131323229MAH)

Mahle Oil Pan Gasket Set

from

$86.89
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-10630-01)

Molded Rubber Valve Cover Gasket Set: Direct Fit, 2 Pieces

from

$32.99
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds OE specifications
  • Zero engine leakage for late model vehicles.
See More

ACDelco – GM Original Equipment Engine Intake Plenum Gasket Set (Part No.A8048205423ACD)

GM Original Equipment Engine Intake Plenum Gasket Set

from

$18.18
WARNING: This item cannot be returned for a replacement or refund if opened! The ACDelco GM Original Equipment Engine Intake Plenum Gasket Set is a GM-recommended replacement for your vehicle’s original component. It comes with a set of replacement gaskets for your worn engine intake manifold gaskets. This original equipment engine intake manifold gasket set has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Comes with a set of replacement gaskets for your worn engine intake manifold gaskets
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Mahle – Timing Cover Gasket (Part No.A8050202668MAH)

Timing Cover Gasket

from

$9.14
Timing Cover Gasket

ACDelco – GM Original Equipment Valve Cover Gasket (Part No.A8030210561ACD)

GM Original Equipment Valve Cover Gasket

from

$6.44
The ACDelco GM Original Equipment Valve Cover Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Victor Reinz – Engine Timing Cover Gasket (Part No.71-14069-00)

Engine Timing Cover Gasket

from

$4.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

MAHLE Original – Engine Timing Cover Gasket (Part No.T31259)

Engine Timing Cover Gasket

from

$4.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Mahle – Water Pipe O-Ring (Part No.G2026372923MAH)

Water Pipe O-Ring

from

$2.46
Water Pipe O-Ring

Most Popular 2002 Chevrolet Impala Engine Mounts

Customize your Chevrolet with 11 Engine Mounts products like Engine Mounts, Engine Mount and Torque Struts, and Engine Mount Brackets, all priced under $173.99.

Anchor – Torque Strut Motor Mount: Front Right, Front Left, Front, 1 Piece (Part No.2866)

Torque Strut Motor Mount: Front Right, Front Left, Front, 1 Piece

from

$27.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 94-09; CHEV 95-05; OLDS 94-99; PONT 94-08;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1994-2009
  • Weight approx: 1 Lbs
  • COMPLETE MOUNT
See More

Anchor – Torque Strut Motor Mount: Front Left, Front Right, Front, 1 Piece (Part No.2716)

Torque Strut Motor Mount: Front Left, Front Right, Front, 1 Piece

from

$16.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 94-09; CHEV 95-09; OLDS 94-04; PONT 94-09; SATURN 05-07;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1994-2009
  • Weight approx: 1 Lbs
  • INSERT ONLY
See More

Anchor – Engine Mount: Right, 1 Piece (Part No.2987)

Engine Mount: Right, 1 Piece

from

$61.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 02-09; CHEV 00-11; PONT 01-09; SATURN 05-07;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2000-2011
  • Weight approx: 5 Lbs
  • HYDRAULIC
See More

Anchor – Torque Strut Motor Mount: Front Left, Front Right, 1 Piece (Part No.3088)

Torque Strut Motor Mount: Front Left, Front Right, 1 Piece

from

$55.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 96-09; CHEV 98-05; OLDS 98-02; PONT 97-08;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1996-2009
  • Weight approx: 2 Lbs
  • STRUT/RADIATOR SUPPORT
  • PART GROUP: 3088, 3088
See More

Anchor – Engine Mount: Right, 1 Piece (Part No.2796)

Engine Mount: Right, 1 Piece

from

$41.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 88-05; CHEV 90-05; OLDS 88-04; PONT 88-05;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1988-2005
  • Weight approx: 5 Lbs
  • HYDRAULIC
See More

Anchor – Torque Strut Motor Mount: Front Left, Front Right, 1 Piece (Part No.2901)

Torque Strut Motor Mount: Front Left, Front Right, 1 Piece

from

$49.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 94-05; CHEV 95-05; OLDS 94-97; PONT 94-03;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1994-2005
  • Weight approx: 3 Lbs
  • STRUT/RADIATOR SUPPORT
  • PART GROUP: 2901, 2901
See More

International Suspension Group – International Suspension Group Engine Mount (Part No.A7000459731ISG)

International Suspension Group Engine Mount

from

$79.88
International Suspension Group engine and transmission mounts are designed to the highest quality standards and manufactured using leading-edge technology.

Product Features:
  • High quality steel for mounts cast aluminum or steel frames (e-Coating being employed for corrosion resistance)
  • Rubber: high quality NVH rubber which is same used in OE applications
  • All mounts meet or exceed OEM specifications utilizing OE quality testing procedures
  • ISO/TS16949 manufacturer for OE contracts
  • All included hardware made of hardened steel with superior bolts
  • Hydro-Electric mounts have the same number of components as OE, where applicable
  • Electrical connectors are fully functional
See More

Dorman – Engine Mount Bracket (Part No.917-000)

Engine Mount Bracket

from

$79.99
This engine mount bracket is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

GM Genuine Parts – White Engine Mount (Part No.10448575)

White Engine Mount

from

$173.99
GM Genuine Parts Engine Mount are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Motor Mount (Part No.A7000459731ACD)

GM Original Equipment Motor Mount

from

$160.70
The ACDelco GM Original Equipment Motor Mount is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

DEA – Engine Torque Rod (Part No.A7030321138DEA)

Engine Torque Rod

from

$21.99
Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of motor mounts in the aftermarket industry for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.

Product Features:
  • USA Development and OEM laboratory – 14 OEM Engineers
  • Design Solutions and Installation Enhancements to Failing OEM designs
  • Complete Factory Testing and Vehicle Verification Resources
See More

Top Picks for 2002 Chevrolet Impala Camshafts

Upgrade Chevrolet Impalas with top-quality Camshafts parts, including 21 OEM and aftermarket selections for your 2002 model.

Dorman – Cam, Crank And Ignition Harness (Part No.645-688)

Cam, Crank And Ignition Harness

from

$147.99
This engine camshaft position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine camshaft position sensor connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Air Charge Temperature Sensor Connector (Part No.PT778)

Air Charge Temperature Sensor Connector

from

$35.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
  • Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
  • All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
  • Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest – Engine Camshaft Position Sensor Connector (Part No.PT196)

Engine Camshaft Position Sensor Connector

from

$35.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1492M)

Engine Camshaft Bearing Set

from

$32.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Carquest Premium – Camshaft Position Sensor (Part No.CSC1131)

Camshaft Position Sensor

from

$48.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Engineered with technology that provides increased accuracy with a stronger, more consistent signal
  • Sensors are based on proven hall effect and variable reluctance technology
  • Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
  • O-rings and seals are included if required
  • Weather-tight connectors prevent leaks and corrosion for longer life
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2782)

Black Multi-Purpose Pigtail

from

$44.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Camshaft Sensor (Part No.CSC1109)

Camshaft Sensor

from

$41.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1019)

4WD Indicator Light Switch Connector

from

$31.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Engine Camshaft Position Sensor (Part No.35A1033)

Engine Camshaft Position Sensor

from

$39.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • 100% testing to meet OE performance
  • High temperature resistance for longer life
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1889M)

Engine Camshaft Bearing Set

from

$26.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2437)

Black Multi-Purpose Pigtail

from

$67.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Engine Camshaft Position Sensor (Part No.SS10044)

Engine Camshaft Position Sensor

from

$63.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi products are manufactured in a Delphi ISO certified facility
  • Designed digital output for maximum signal to noise ratio
  • All parts used in the manufacture process are Delphi validated
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
See More

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1352)

Engine Camshaft Position Sensor Connector

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Delphi – Engine Variable Valve Timing (VVT) Adjuster Magnet (Part No.SS10687)

Engine Variable Valve Timing (VVT) Adjuster Magnet

from

$75.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Manufactured to meet or exceed OE requirements
  • Part is validated, tested and matched to the right vehicle application
  • Designed digital output for maximum signal to noise ratio
See More

ACDelco – GM Original Equipment Engine Hydraulic Cam Follower (Part No.A4010352802ACD)

GM Original Equipment Engine Hydraulic Cam Follower

from

$65.12
The ACDelco GM Original Equipment Engine Hydraulic Valve Adjuster/Valve Lifter is a GM-recommended replacement for your vehicle’s original component. It automatically maintains a Zero valve lash condition, preventing valve train noise and unnecessary valve train component wear. This original equipment engine hydraulic valve adjuster/valve lifter has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. This is important on these types of high-labor-hour repairs because the part designs are enhanced to incorporate GM OE updates, upgrades, and Technical Service Bulletins. Only ACDelco can offer complete late-model coverage and all ACDelco GM OE Engine Components.

Product Features:
  • Adjusts the valves on your vehicle’s engine for proper performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Adjuster Magnet (Part No.CSA1757)

Engine Variable Valve Timing (VVT) Adjuster Magnet

from

$59.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Designed to meet or exceed OE specifications in fit, form, and function
  • End of the line tested to ensure proper function
  • Threaded mounting bolt, hardware and/or gaskets where applicable for easy installation
  • Global coverage for import and domestic applications
See More

Delphi – Engine Camshaft Position Sensor (Part No.SS10025)

Engine Camshaft Position Sensor

from

$50.99
For more than a century, Delphi has been making the parts cars are born with – often developing new technologies in the process. Delphi is proud of its OE heritage, and over the years they’ve used that experience to expand into a global aftermarket supplier.

Product Features:
  • Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection.
  • Manufactured to meet or exceed OE requirements.
See More

National – Shaft Repair Sleeve (Part No.99176)

Shaft Repair Sleeve

from

$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

NTK – Camshaft Position Sensor (Part No.EC0054)

Camshaft Position Sensor

from

$38.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More

ACDelco – GM Original Equipment Engine Hydraulic Cam Follower (Part No.A4010207833ACD)

GM Original Equipment Engine Hydraulic Cam Follower

from

$37.88
The ACDelco GM Original Equipment Engine Hydraulic Valve Adjuster/Valve Lifter is a GM-recommended replacement for your vehicle’s original component. It automatically maintains a Zero valve lash condition, preventing valve train noise and unnecessary valve train component wear. This original equipment engine hydraulic valve adjuster/valve lifter has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. This is important on these types of high-labor-hour repairs because the part designs are enhanced to incorporate GM OE updates, upgrades, and Technical Service Bulletins. Only ACDelco can offer complete late-model coverage and all ACDelco GM OE Engine Components.

Product Features:
  • Adjusts the valves on your vehicle’s engine for proper performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

FAG US – GENERAL SEAL (Part No.SS2784)

GENERAL SEAL

from

$18.49
GENERAL SEAL

In-Demand Engine Timing Parts for 2002 Chevrolet Impalas

Select from 22 premium Engine Timing Parts parts for your 2002 Chevrolet Impala, with prices ranging from $3.99 to $358.99.

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Engine Harmonic Balancer Repair Sleeve

from

$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Made of stainless steel
  • Designed to prevent timing cover seal leaks
  • Takes up gaps caused by worn-out harmonic balancer shafts
See More

Dorman – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) (Part No.570-008)

Rubber Expansion Plug 1-3/8 In. - Size Range 1-3/8 In. - 1-1/2 In. (sold by each)

from

$3.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Multi Purpose Seal (Part No.9845)

Multi Purpose Seal

from

$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.710162)

Multi Purpose Seal

from

$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Engine Harmonic Balancer Kit (Part No.5000)

Engine Harmonic Balancer Kit

from

$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Includes timing cover seal and harmonic balancer sleeve
  • Solves the oil leaking around timing cover seal
  • Made of stainless steel
  • Takes up gaps caused by worn-out harmonic balancer shafts
See More

Cloyes Gear – Engine Timing Chain Kit (Part No.9-0381SA)

Engine Timing Chain Kit

from

$86.99
Timing Chain Kits includes all components for a quick and efficient replacement

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 80 Links, Timing Components, With Sprockets (Part No.9-0700S)

Primary Timing Chain Kit: Exact Fit, 80 Links, Timing Components, With Sprockets

from

$128.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Dorman – Timing Cover Kit (Part No.635-516)

Timing Cover Kit

from

$358.99
This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:
  • Direct replacement – this engine timing cover matches the fit and function of the original equipment cover.
  • Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life.
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Cloyes Gear – Engine Timing Chain (Part No.C700)

Engine Timing Chain

from

$69.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
See More

Cloyes Gear – Engine Timing Chain (Part No.C381A)

Engine Timing Chain

from

$51.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
See More

Cloyes Gear – Engine Timing Damper (Part No.9-5344)

Engine Timing Damper

from

$24.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Meet or exceed OEM performance requirements
  • Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
See More

MAHLE Original – Engine Timing Cover Seal (Part No.65022)

Engine Timing Cover Seal

from

$16.79
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Cloyes Gear – Engine Timing Set (Part No.C-3221)

Engine Timing Set

from

$114.99
Timing Set includes all components for a quick and efficient replacement

Product Features:
  • Utilizes the latest in design and technology to offer complete chain sets
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Utilizes the latest in design and technology to offer complete chain sets
  • Refer to our online catalog for detailed application-specific information
  • Set Includes: Cam Sprocket, Crankshaft Sprocket, Timing Chain
See More

Cloyes Gear – Engine Timing Set (Part No.C-3214)

Engine Timing Set

from

$66.99
Timing Set includes all components for a quick and efficient replacement

Product Features:
  • Utilizes the latest in design and technology to offer complete chain sets
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Utilizes the latest in design and technology to offer complete chain sets
  • Refer to our online catalog for detailed application-specific information
  • Set Includes: Cam Sprocket, Crankshaft Sprocket, Timing Chain
See More

Cloyes Gear – Engine Balance Shaft Sprocket (Part No.2558)

Engine Balance Shaft Sprocket

from

$48.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • CAD designed and manufactured using premium materials to ensure optimal performance
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S848T)

Engine Timing Camshaft Sprocket

from

$38.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S810T)

Engine Timing Camshaft Sprocket

from

$34.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Balance Shaft Gear (Part No.2551)

Engine Balance Shaft Gear

from

$33.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • CAD designed and manufactured using premium materials to ensure optimal performance
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S847)

Engine Timing Crankshaft Sprocket

from

$26.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S811)

Engine Timing Crankshaft Sprocket

from

$22.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Damper (Part No.9-5388)

Engine Timing Damper

from

$16.29
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Meet or exceed OEM performance requirements
  • Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
See More

Dorman – Help – Automatic Belt Tensioner Bolt Kit for Impala 2005 – 03, 3.8L (Part No.45358)

Automatic Belt Tensioner Bolt Kit for Impala 2005 - 03, 3.8L

from

$13.99
Automatic Belt Tensioner Bolt Kit for Impala 2005 – 03, 3.8L

Most Sold 2002 Chevrolet Impala Valve Cover and Cylinder Heads

Explore our best-selling Chevrolet parts for the 2002 Impala among 36 OEM and aftermarket options starting from $0.65.

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72833)

Engine Valve Cover Grommet Set

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 74033)

CYLINDER HEAD BOLT SET

from

$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Sealed Power – Engine Push Rod (Part No.RP-3331)

Engine Push Rod

from

$6.79
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • State-of-the-art manufacturing
  • Exceptional material quality
  • Exacting tolerances
  • Heat treated tips
  • Stock or mild modified replacement
  • Made in USA
See More

Felpro – Engine Valve Cover Grommet Set (Part No.ES 71044)

Engine Valve Cover Grommet Set

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 9917 PT-3)

Cylinder Head Gasket Set

from

$143.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9918 PT)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
See More

Felpro – Head Gasket (Part No.541SD)

Head Gasket

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PermaTorque Severe Duty head gaskets are built to exceed all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Features thicker high grade austenitic stainless steel armor
  • Sealing beads around coolant passages, specialized coatings and hot press flattening
  • Validated for fit, form, and function
  • Unsurpassed quality you can trust
See More

Dorman – Valve Covers: With Gasket, Direct Replacement, Plastic, Passenger Side (Part No.264-967)

Valve Covers: With Gasket, Direct Replacement, Plastic, Passenger Side

from

$66.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:
  • Direct replacement – this valve cover matches the original equipment part for fit and function.
  • Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking.
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9071 PT)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Sealed Power – Engine Valve Lifter (Part No.HT-2148)

Engine Valve Lifter

from

$12.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Sealed Power – Engine Valve Lifter (Part No.HT-2270)

Engine Valve Lifter

from

$19.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72892)

CYLINDER HEAD BOLT SET

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 9071 PT-1)

Cylinder Head Gasket Set

from

$144.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Engine Cylinder Head Gasket Set (Part No.HST 9071 PT-1)

Engine Cylinder Head Gasket Set

from

$145.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR THE TOUGHEST CONDITIONS — Engineered for hardworking vehicles that operate in severe conditions
  • STRONG AND DURABLE — Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
  • PREMIUM MATERIALS — High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
  • SUPERIOR SEAL — Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9917 PT)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PermaTorque head gaskets meets or exceeds all original equipment specifications
  • Requires no retorquing of the head bolts
  • Unsurpassed quality you can trust
  • Unsurpassed quality you can trust
See More

Sealed Power – Engine Exhaust Valve (Part No.V-4497)

Engine Exhaust Valve

from

$18.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Sealed Power – Engine Valve Lifter (Part No.HT-2148A)

Engine Valve Lifter

from

$24.79
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
  • New OEM riveted pin retaining design
See More

Sealed Power – Engine Push Rod (Part No.RP-3340)

Engine Push Rod

from

$2.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Sealed Power – Engine Push Rod (Part No.RP-3330)

Engine Push Rod

from

$3.79
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • State-of-the-art manufacturing
  • Exceptional material quality
  • Exacting tolerances
  • Heat treated tips
  • Stock or mild modified replacement
  • Made in USA
See More

Dorman – Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each) (Part No.570-009)

Rubber Expansion Plug 1-1/2 In. - Size Range 1-1/2 In. - 1-5/8 In. (sold by each)

from

$8.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)

Engine Valve Spring Retainer Keeper

from

$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Felpro – O-RING (Part No.73193)

O-RING

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

ACDelco – Engine Hydraulic Valve Adjuster/Valve Lifter (Part No.HL124)

Engine Hydraulic Valve Adjuster/Valve Lifter

from

$55.99
ACDelco GM Original Equipment Engine Valve Lifters automatically help maintain a ‘zero’ valve lash condition to help prevent valve train noise and unnecessary valve train component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Adjusts the valves on your vehicle’s engine for proper performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Sealed Power – Engine Valve Spring (Part No.VS-1628)

Engine Valve Spring

from

$7.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Sealed Power – Engine Intake Valve (Part No.V-4571)

Engine Intake Valve

from

$23.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Dorman – Pipe Plug C.S. Square 3/8-18 Npt, Head Size 5/16 In. (sold by each) (Part No.090-019)

Pipe Plug C.S. Square 3/8-18 Npt, Head Size 5/16 In. (sold by each)

from

$2.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Valve Covers: With Gasket, Direct Replacement, Plastic, Driver Side (Part No.264-966)

Valve Covers: With Gasket, Direct Replacement, Plastic, Driver Side

from

$62.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:
  • Direct replacement – this valve cover matches the original equipment part for fit and function.
  • Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking.
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
See More

Dorman – Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (sold by each) (Part No.090-046)

Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (sold by each)

from

$1.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Spartan – Engine Cylinder Head; Chev 3.1/3.4 96-03 Head (Part No.2CW6)

Engine Cylinder Head; Chev 3.1/3.4 96-03 Head

from

$357.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Buick 231 95-09 Cyl Head (Part No.2B55)

Engine Cylinder Head; Buick 231 95-09 Cyl Head

from

$314.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Chev 3.4 96-03 Cyl Head (Part No.2CWF)

Engine Cylinder Head; Chev 3.4 96-03 Cyl Head

from

$305.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Mahle – Cylinder Head Gasket Set (Part No.A8010575098MAH)

Cylinder Head Gasket Set

from

$199.34
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

Dorman – Valve Cover (Part No.A31601026184DOR)

Valve Cover

from

$87.87
Save time and money with Dorman’s Engine Valve Cover. Each one comes with the appropriate number of gaskets as well as all other components needed for a complete repair.

Product Features:
  • Direct replacement for a proper fit every time
  • Provides a tight, lasting seal against oil leaks
  • High quality plastic, steel, or aluminum construction resists warping, cracking and porousness
  • Metal construction is corrosion-resistant for sustained protection of the rocker arms
See More

Mahle – Mahle Cylinder Head Gasket (Part No.A8100205477MAH)

Mahle Cylinder Head Gasket

from

$43.87
Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head gaskets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials
  • Packaged in shrink wrapped tray
See More

Sealed Power – Engine Valve Spring (Part No.VS-1642)

Engine Valve Spring

from

$7.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Dorman – Pipe Plug C.S. Square 1/4-18 Npt, Head Size 1/4 In. (sold by each) (Part No.090-067)

Pipe Plug C.S. Square 1/4-18 Npt, Head Size 1/4 In. (sold by each)

from

$4.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Top-Rated Engine Parts Brands For Your 2002 Chevrolet Impala

Shop for the best-rated brands offering Engine Parts and other products for your 2002 Chevrolet Impalas. Below you’ll find some of our best rated Engine Parts from FELPRO, Sealed Power, and Dorman, and more. Engine Parts from these brands that fit a 2002 Impala start at just $0.65 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2002 Chevrolet Impala Engine Parts

When it comes to maintaining or upgrading your 2002 Chevrolet Impala, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2002 Chevrolet Impala. With over 27 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $40.62. Plus, with over 223 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Valve Stem Oil Seal Set
from
$43.99
This product is not rated

Engine Valve Stem Oil Seal Set

“”

O-RING
from
$4.49
This product is not rated

O-RING

“”

Engine Crankshaft Seal Kit
from
$21.49
This product is not rated

Engine Crankshaft Seal Kit

“”

Popular Sealed Power 2002 Chevrolet Impala Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 2002 Chevrolet Impala owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 2002 Impala, Advance Auto Parts carries a full inventory of 41 Sealed Power Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Sealed Power Engine Parts range from $0.65 to $193.99, plus, with more than 68 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

Engine Push Rod
from
$2.99
This product is not rated

Engine Push Rod

“”

Engine Push Rod
from
$3.79
This product is not rated

Engine Push Rod

“”

Engine Valve Lifter
from
$24.79
This product is not rated

Engine Valve Lifter

“”

FAQs for 2002 Chevrolet Impala Engine Parts

Which Engine Parts are best-sellers for 2002 Chevrolet Impalas?

Out of 228 Engine Parts that fit 2002 Chevrolet Impalas, the following parts are the top sellers:

What’s the price range for 2002 Chevrolet Impala Engine Parts?

Engine Part prices for the 2002 Chevrolet Impala start at $0.65 and go up to $2,514.99 for the most premium parts.

What’s the average price of a Engine Part for a 2002 Chevrolet Impala?

The average price for Engine Parts for the 2002 Chevrolet Impala is $80.28. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Impala model years?

Yes, we currently carry Engine Parts for 51 model years of Chevrolet Impalas between 1958 and 2020. Engine Parts are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Engine Parts for my 2002 Chevrolet Impala?

The cheapest 2002 Chevrolet Impala Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 2002 Chevrolet Impala?

Out of 3,186 reviews by customers, our 2002 Chevrolet Impala Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2002 Chevrolet Impala and their top-rated products:

What types of Engine Parts do you sell for my 2002 Chevrolet Impala?

Can I get help with 2002 Chevrolet Impala Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Impala Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Impala Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.