2002 Cadillac DeVille Belts and Hoses

Name: Molded 90 Degree Heater Hose
Brand: Gates
SKU: 28479
Price: 21.49 USD

Below you will find various in-demand Cadillac Belts and Hoses, components and accessories for your 2002 DeVille. Advance Auto Parts has popular DeVille parts like Pulleys, Serpentine and V Belts, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other DeVille model years including 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 and more. Select a category of 2002 Cadillac DeVille Belts and Hoses below and start saving instantly.

Popular 2002 Cadillac DeVille Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Heater Hose Fittings

Engine Oil Cooler Hoses

Fuel Injection Fuel Feed Hose Seals

Essential Belts and Hoses for 2002 Cadillac DeVilles

from

$21.49

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:

Resists electrochemical degradation and water permeation
Use with heater hose connectors and bulk heater hose to create custom assemblies
Compatible for coolant, air and water applications
EPDM tube and cover, synthetic fiber reinforcement
SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Caution: Do not use for fuel or oil transfer applications

from

$12.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$45.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$59.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all OEM specifications
It is recommended to replace the tensioner (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$120.99

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$57.99

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
Durable construction – made of fuel-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$27.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$15.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$27.49

HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:

Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
Easy to install – matches the original equipment form and dimensions for a simple replacement
Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life

from

$13.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$19.99

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive “Genuine” components.

from

$32.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
Original equipment quality suitable for virtually all domestic and import vehicles in today’s fleet
Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
High-end bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in harsh conditions

from

$21.99

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$35.49

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for increased leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimal inventory
Heat, oil and ozone resistant
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

from

$3.49

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$67.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. The Litens product meets all original equipment form, fit, and function specifications for this General Motors application. (*O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design.) Note: This tensioners has gone through numerous O.E. design modifications throughout the years, This tensioner is the 1st generation and covers all design change levels. New engine bolt included. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$67.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

from

$27.49

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$73.99

This Litens pulley is manufactured by the original equipment part supplier. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$19.49

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$29.99

Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:

Engineered to resist electrochemical degradation, the leading cause of hose failure
The steel wire spiral allows them to take on multiple shapes without bending or crushing
EPDM tube and neoprene cover for longer life
Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
Heat, oil and ozone resistant
Performs to SAE 20R5 Type EC Class D-2 specifications
Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
Warning: Do not use for fuel or oil transfer applications
Caution: Do not use for fuel or oil transfer applications.

from

$46.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$27.99

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$27.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the leading cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; knitted synthetic fiber reinforcement; EPDM lid resistant to heat, ozone and chemical refrigerants
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Warning: Do not use for fuel or oil transfer applications

from

$16.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$59.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$48.99

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

Upgrade your 2002 Cadillac DeVille with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2002 Cadillac DeVille, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Belts and Hoses are key to keeping your DeVille functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Belts and Hoses for the 2002 Cadillac DeVille, designed to meet your needs without breaking the bank. From Pulley replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2002 Cadillac DeVille at great prices. Our Belts and Hoses inventory for this model ranges from just $1.99 to $120.99, with an average price of $38.02. Our 38 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 2002 Cadillac DeVille without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Cadillac DeVille, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, DriveWorks, and more. Litens Belts and Hoses start at just $34.49 and boast an impressive 4.7 stars average rating from customers. Dayco and DriveWorks also bring quality to the table, with Belts and Hoses available starting at $11.99, and at an average 4.5 stars rating. With 2,279 customer reviews and counting, our 2002 Cadillac DeVille Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 Cadillac DeVille is always ready to roll. We’re committed to providing you with everything you need to keep your DeVille in top shape, all in one place. Start shopping confidently below for your 2002 Cadillac DeVille!

Best-Selling Pulleys for 2002 Cadillac DeVilles

Enhance the driving experience in your Cadillac with 8 quality Pulley components, starting at $13.79.

show more show less

from

$58.99

This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty polymer construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.

from

$30.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$34.49

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$13.79

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$73.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$32.99

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last with superior resistance to dirt, salt, chemicals, and other engine compartment contaminants.
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in harsh conditions

from

$44.99

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$36.99

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

Most Popular 2002 Cadillac DeVille Serpentine and V Belts

Customize your Cadillac with 9 Serpentine and V Belts products like Serpentine Belts, all priced under $59.99.

show more show less

from

$22.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$32.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$49.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$41.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$11.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$53.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$59.99

The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all OEM specifications
It is recommended to replace the tensioner (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$18.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
Replacement of the tensioner is recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$14.99

Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OE fit, form, and function

Top Picks for 2002 Cadillac DeVille Belt Tensioners

Upgrade Cadillac DeVilles with top-quality Belt Tensioners parts, including 4 OEM and aftermarket selections for your 2002 model.

show more show less

from

$67.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

from

$67.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$78.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$75.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this General Motors tensioner for the aftermarket. This “O.E .Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). The aftermarket tensioner is integrated into a black mounting bracket. Caution: Unlike other aftermarket tensioners, the Litens tensioner maintains the original pulley dimensions for optimal performance. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. Tensioner pre-attached to a steel mounting plate.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

In-Demand Heater Hoses for 2002 Cadillac DeVilles

Select from 6 premium Heater Hoses parts for your 2002 Cadillac DeVille, with prices ranging from $1.99 to $28.99.

show more show less

from

$13.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$10.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$1.99

Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$27.49

Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
Easy to install – matches the original equipment form and dimensions for a simple replacement
Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life

from

$28.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$11.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Most Sold 2002 Cadillac DeVille Radiator Hoses

Explore our best-selling Cadillac parts for the 2002 DeVille among 4 OEM and aftermarket options starting from $27.99.

show more show less

from

$35.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$27.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$46.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$31.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the leading cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
Warning: Do not use for fuel or oil transfer applications

Top-Rated Belts and Hoses Brands For Your 2002 Cadillac DeVille

Shop for the best-rated brands offering Belts and Hoses and other products for your 2002 Cadillac DeVilles. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and DriveWorks, and more. Belts and Hoses from these brands that fit a 2002 DeVille start at just $11.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2002 Cadillac DeVille Belts and Hoses

When it comes to maintaining or upgrading your 2002 Cadillac DeVille, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2002 Cadillac DeVille. With over 3 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $34.49, with an average price of just $53.82. Plus, with over 21 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $67.99

(2)

Accessory Drive Belt Tensioner – Original Equipment Quality

“The store staff ordered it and I had it by the next day. Good quality part . The price was great.”

from $58.99

(3)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 52mm Diameter

“Fit well. Works well.”

from $34.49

(16)

Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter

“89 full size blazer replacement for worn out plastic one.”

Popular Dayco 2002 Cadillac DeVille Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2002 Cadillac DeVille owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2002 DeVille, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Dayco Belts and Hoses range from $22.99 to $35.99, plus, with more than 21 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $22.99

(12)

Poly Rib Belt Serpentine Belt; 24.25 Long, 3 Rib Count

“It is good.”

from $35.99

(8)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 30" Long, 1.25" Diameter

“Good radiator hose”

from $27.99

(1)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.56" Diameter

“Great”

FAQs for 2002 Cadillac DeVille Belts and Hoses

Which Belts and Hoses are best-sellers for 2002 Cadillac DeVilles?

Out of 38 Belts and Hoses that fit 2002 Cadillac DeVilles, the following parts are the top sellers:

Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (22149402) – $13.99
Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (5062861) – $32.49
Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (3340112) – $41.49

What’s the price range for 2002 Cadillac DeVille Belts and Hoses?

Belts and Hose prices for the 2002 Cadillac DeVille start at $1.99 and go up to $120.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2002 Cadillac DeVille?

The average price for Belts and Hoses for the 2002 Cadillac DeVille is $38.02. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Cadillac DeVille model years?

Yes, we currently carry Belts and Hoses for 51 model years of Cadillac DeVilles between 1953 and 2005. Belts and Hoses are bought most frequently for the following model years: 2005, 2004, 2003, 2001, 2000, 1999, 1998, 1997, and 1996.

What are the cheapest Belts and Hoses for my 2002 Cadillac DeVille?

The cheapest 2002 Cadillac DeVille Belts and Hoses we carry in stock are:

Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (10844721) – $1.99
Fuel Feed Pipe O-Ring (15730384) – $3.49
Safety Stripe Standard Straight Heater Hose (Sold by foot) (10505007) – $3.99
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4" Long, .63" Diameter (19590118) – $10.49
Poly Rib Belt Serpentine Belt; 24.25 Long, 3 Rib Count (15060006) – $11.99

What are the top-rated Belts and Hoses that fit the 2002 Cadillac DeVille?

Out of 2,279 reviews by customers, our 2002 Cadillac DeVille Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2002 Cadillac DeVille and their top-rated products:

Belt Tensioners
- Automatic Belt Tensioner (15130049) – $67.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457645) – $67.99
- Automatic Belt Tensioner (20130186) – $78.99
Serpentine and V Belts
- Automatic Belt Tensioner (15130049) – $67.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457645) – $67.99
- Automatic Belt Tensioner (20130186) – $78.99
Radiator Hoses
- Automatic Belt Tensioner (15130049) – $67.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457645) – $67.99
- Automatic Belt Tensioner (20130186) – $78.99

What types of Belts and Hoses do you sell for my 2002 Cadillac DeVille?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 2002 Cadillac DeVille:

Can I get help with 2002 Cadillac DeVille Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Belts and Hoses and more.

What is your return policy for Cadillac DeVille Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Cadillac DeVille Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2002 Cadillac DeVille Belts and Hoses

Gates – Molded 90 Degree Heater Hose (Part No.28479)

Gates – Premium Molded Coolant Hose (Part No.22038)

Driveworks – Poly Rib Belt Serpentine Belt; 86.5 Long, 6 Rib Count (Part No.865K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K060815)

Dorman – Fuel Filler Neck Hose (Part No.573-106)

Dorman – Fuel Filler Neck Hose (Part No.573-088)

Dayco – Flex Radiator Hoses; EPDM Rubber, 13.88 Inch Long, 1.5 Inch Inner Dia. (Part No.81151)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 32" Long, 1.25" Diameter (Part No.E71082)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (OE Fix) (Part No.800-409HP)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409)

Autotecnica – Accessory Belt Idler Pulley (Part No.GM1413162)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38001)

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.88 Inch Long, 1.5 Inch Inner Dia. (Part No.81181)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25530)

GM Genuine Parts – Fuel Feed Pipe O-Ring (Part No.217-452)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999156A)

Dayco – Automatic Belt Tensioner (Part No.89266)

Litens – Idler Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900038A)

Litens – Idler Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900050A)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26501)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.87661)

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.5 In. to 1.25 In. Inner Dia. (Part No.81091)

Gates – Molded Coolant Hose (Part No.20294)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.25" Long, 1.50" Diameter (Part No.D70861)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 52mm Diameter (Part No.900015A)

Dayco – Idler Pulley, Dayco (Part No.89007)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900022A)

Dorman – Idler Pulley (Pulley only) (Part No.419-610)

Litens – Idler Pulley: Direct Fit, Steel, 76mm Diameter (Part No.900050A)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38006)

Dorman – Idler Pulley (Pulley Only) (Part No.419-632)

Dorman – Idler Pulley (Pulley Only) (Part No.419-663)

Dayco – Poly Rib Belt Serpentine Belt; 24.25 Long, 3 Rib Count (Part No.5030243)

Driveworks – Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (Part No.825K6)

Dayco – Poly Rib Belt Serpentine Belt; 82.5 Long, 6 Rib Count (Part No.5060825)

Driveworks – Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (Part No.815K6)

Driveworks – Poly Rib Belt Serpentine Belt; 24.25 Long, 3 Rib Count (Part No.243K3)

Dayco – Poly Rib Belt Serpentine Belt; 81.5 Long, 6 Rib Count (Part No.5060815)

Gates – Micro-V Serpentine Drive Belt (Part No.K060815)

Gates – Micro-V Serpentine Drive Belt (Part No.K030243)

Carquest Standard – Serpentine Belt: 24.3" Long, 3 Rib Count (Part No.243K3)

Dayco – Automatic Belt Tensioner (Part No.89266)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999156A)

Dayco – Automatic Belt Tensioner (Part No.89317)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999417A)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4" Long, .63" Diameter (Part No.A71681)

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (OE Fix) (Part No.800-409HP)

Dorman – Coolant Connector (Part No.800-431)

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 8 Inch Length (Part No.88428)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 30" Long, 1.25" Diameter (Part No.E72082)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.56" Diameter (Part No.D72083)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.87661)

Gates – Premium Molded Coolant Hose (Part No.22525)